Propane Usage & Supply Planner

Connect appliance fuel-input ratings to a chronological usage plan. Enter measured usable propane, your reserve threshold, fuel heat content and replacement price, then define appliances and consecutive periods with lower and higher usage factors. Inspect supply trajectories, appliance contributions, daily demand and exact reserve or depletion timing. Demand beyond available supply remains visible as a shortfall rather than being silently capped. Both scenarios and all assumptions can be exported. The examples are hypothetical; the tool does not select a tank, predict weather, determine vaporization or pipe capacity, schedule a delivery, or guarantee appliance operation until the mathematical empty point.

Propane usage & supply

See the demand. Track the supply.

Connect appliance input ratings to changing usage periods, reserve timing and fuel shortfalls without hiding unmet demand.

20 days. Demand 30 US gal to 50 US gal. Higher demand scenario shortfall 0 US gal.

Edit supply, appliances and usage periods

Plan fuel demand from entered appliance input ratings and usage assumptions. Initial supply means measured usable fuel, not nominal tank capacity. This worksheet does not determine tank size, allowable fill, vapor delivery, pipe capacity or whether equipment can operate until the calculated empty day.

Fuel and starting supply

Use one currency throughout. Changing this label does not convert prices.

Positive, up to 1,000,000. The example uses an approximate EIA sample factor of 91,452. Use a compatible supplied heat-content basis; this is not a universal exact constant.

Nonnegative, up to 1,000,000. Values projected demand; not a delivery invoice or a valuation of prepaid fuel. No tax or delivery fee is added.

Measured usable supply from 0 to 1,000,000,000. Do not enter nominal tank size, tank-height percentage or a fill recommendation. No replenishment is modeled.

Nonnegative, up to 1,000,000,000. A user-defined comparison, not a recommended operating minimum. If already at or below it, reserve timing is day zero.

Appliances and baseline use

Enter fuel INPUT ratings, not useful heat output. Baseline firing hours = daily use window × firing duty. A zero rating or zero duty explicitly disables that load; a blank does not.

Appliance 1

Up to 100 characters, such as Space heater or Water heater.

Nonnegative, up to 1,000,000,000. Use the burner’s fuel INPUT rating on the same heat-content basis. Do not substitute delivered heating output or an electrical watt rating.

From 0 to 24. This is the window during which the appliance may fire; the duty percentage applies inside it.

From 0 to 100. For 6 hours at 50% duty, baseline firing time is 3 hours. Period usage factors scale this firing time; do not count the same reduction twice.

Appliance 2

Up to 100 characters, such as Space heater or Water heater.

Nonnegative, up to 1,000,000,000. Use the burner’s fuel INPUT rating on the same heat-content basis. Do not substitute delivered heating output or an electrical watt rating.

From 0 to 24. This is the window during which the appliance may fire; the duty percentage applies inside it.

From 0 to 100. For 6 hours at 50% duty, baseline firing time is 3 hours. Period usage factors scale this firing time; do not count the same reduction twice.

Chronological usage periods

Periods run consecutively in the order below. Each usage factor applies to every appliance’s baseline firing hours. Low and high scenarios are your assumptions, not a weather forecast or confidence interval.

Period 1

Describe the scenario, such as Lower use or Higher use. No calendar dates are inferred.

From 1 to 3,660 days per period; combined horizon cannot exceed 3,660 days. Demand is treated as a constant daily average within each period.

From 0 to 2, no greater than the upper factor. 0 means no use, 0.5 means half baseline firing time, 1 means baseline.

From lower factor to 2. Effective firing hours for every appliance must stay at or below 24 per day. Reduce this factor or the relevant appliance’s hours/duty if needed.

Period 2

Describe the scenario, such as Lower use or Higher use. No calendar dates are inferred.

From 1 to 3,660 days per period; combined horizon cannot exceed 3,660 days. Demand is treated as a constant daily average within each period.

From 0 to 2, no greater than the upper factor. 0 means no use, 0.5 means half baseline firing time, 1 means baseline.

From lower factor to 2. Effective firing hours for every appliance must stay at or below 24 per day. Reduce this factor or the relevant appliance’s hours/duty if needed.

Required blanks remain invalid. Numeric entries accept up to six decimal places, except whole-day durations. Demand beyond initial supply is reported as shortfall, not negative fuel inventory. Reserve and depletion times describe this mathematical schedule only.

Demand and available fuel are different

Projected fuel demand
50 US gal
20-day higher usage scenario
Supply remaining at end
10 US gal
Initial supply less demand, never below zero
Demand shortfall
0 US gal
Demand beyond the entered initial supply
Replacement cost of demand
USD 150
Entered unit price; not a delivery invoice

Baseline use: 2 US gal/day before period factors. Initial usable fuel: 60 US gal. No replenishment is modeled. Demand continues mathematically after depletion and is shown as shortfall, not negative fuel inventory or fuel actually consumed.

When are the thresholds reached?

Your reserve threshold
Day 16.6667
20 US gal remaining
Mathematical empty point
Not reached within horizon
Zero usable volume in this constant-rate schedule

Days are elapsed from the start, not calendar dates. Fractional timing assumes demand is spread evenly through each period. Not reached means no crossing within these 20 days, not infinite supply. A user reserve is not a recommended operating minimum. This does not guarantee vapor delivery or appliance operation until the calculated empty day.

Supply across the usage schedule

Solid blue: lower demand. Dashed purple: higher demand. Dotted grey: your reserve. Vertical scale is remaining fuel, 0 to 60 US gal; horizontal scale is elapsed day 0 to 20. Exact reserve and empty crossings are included in each line. When scenarios coincide, the dashed line overlays the solid line.

60 US galRemaining usable fuel
0 US gal · day 0Day 20

End supply: lower demand 30 US gal; higher demand 10 US gal. End shortfall: lower 0 US gal, higher 0 US gal. Tiny changes may be subpixel; the exact point ledger below retains every value.

Which appliances drive demand?

Total demand over the full horizon, including unmet demand. Common scale 0 to 25 US gal. Solid blue is lower usage; outlined purple is higher usage.

Heater15 US gal – 25 US gal

Water heater15 US gal – 25 US gal

Daily demand changes by period

Common scale 0 to 3 US gal/day. These bars show daily rates, not period totals. Solid blue is lower usage; outlined purple is higher usage.

Mild period · days 0–101 US gal – 2 US gal/day

Higher use · days 10–202 US gal – 3 US gal/day

Exact period ledger

Both scenarios. Fuel in US gallons, costs in USD; fractions preserve precision.
PeriodScenarioStart dayEnd dayDaily demandPeriod demandCumulative demandRemaining supplyCumulative shortfallReplacement cost
Mild periodLower0101101050030
Higher useLower10202203030060
Mild periodHigher0102202040060
Higher useHigher10203305010090
Exact timeline points and appliance contributions
Includes period endpoints and threshold crossings. Elapsed days and US gallons.
ScenarioDayDemand to dateRemainingShortfall
Lower00600
Lower1010500
Lower2030300
Higher00600
Higher1020400
Higher50/340200
Higher2050100
Appliance demand, US gallons per period; not capped at available supply.
PeriodApplianceLower demandHigher demand
Mild periodHeater510
Mild periodWater heater510
Higher useHeater1015
Higher useWater heater1015

Save the demand and supply plan

Export all inputs, both scenarios, exact threshold times, timeline points and appliance contributions. A download does not schedule a delivery or send a quote.

How to use this calculator

  1. Load Two-period usage example or Supply shortfall example, then open Edit supply, appliances and usage periods. Enter measured usable US gallons, your reserve threshold, fuel heat content, replacement price and currency.
  2. Add appliances with their fuel INPUT Btu/hour rating. Enter the baseline daily use window and firing duty within that window. Do not substitute useful heat output or count the same duty reduction twice.
  3. Enter consecutive usage periods with whole-day durations and lower/upper factors. A factor of 1 means baseline firing time; 0.5 halves it. Use the earlier/later buttons to set chronological order.
  4. Inspect lower or higher usage results, reserve and empty timing, supply trajectories and appliance demand. Review shortfall separately from remaining supply; the model does not assume replenishment.
  5. Open the exact timeline and appliance tables or download the propane plan CSV. The export includes both scenarios regardless of the selected headline view, with all inputs and limitations.

The Formula

The mathematical logic powering this calculation is:

For each appliance, baseline firing hours per day = daily use window × firing duty percent / 100. Baseline fuel-input Btu per day = input rating in Btu/hour × firing hours. Baseline US gallons per day = fuel-input Btu per day / entered Btu per US gallon. Use fuel INPUT rating, not useful heating output. No additional efficiency factor is applied to an input rating. The EIA sample conversion table consulted November 17, 2026 lists 91452 Btu per US gallon of propane. Heat content varies; that editable example is an approximate supplied factor, not an exact universal physical constant.
For each chronological period, lower and higher daily demand equal summed baseline gallons per day multiplied by that period’s corresponding usage factor. Period demand = daily demand × whole period days. A factor scales firing hours for every appliance, not fuel heat content or burner rating. Effective firing hours for each appliance must remain at or below 24 per day at the upper factor. The periods run consecutively from elapsed day zero; no calendar, future weather or replenishment is inferred.
Cumulative demand sums all period demand without capping it at initial supply. Remaining fuel = max(0, initial usable gallons − cumulative demand). Cumulative shortfall = max(0, cumulative demand − initial usable gallons). Shortfall is unmet demand, not fuel consumed after depletion. Initial usable supply is entered directly in US gallons; nominal tank capacity, liquid-depth percentage, cylinder weight, allowable fill and vapor-delivery capacity are not converted or assessed.
To locate your reserve threshold, required drawdown = max(0, initial supply − reserve). If initial supply is already at or below reserve, the result is day zero. Otherwise find the first positive-rate period where cumulative demand reaches that drawdown, including equality at a period end. Crossing day = period start day + (required drawdown − demand before period) / period daily demand. The empty point uses initial supply as required drawdown. A null event is reported as not reached within the entered horizon, not infinite supply. Fractional days assume constant daily-average demand within each period.
Replacement cost = projected demand × entered price per US gallon. This values the demand, including shortfall; it is not a delivery invoice or a calculation of prepaid fuel expense. No taxes or delivery fees are added. One currency label does not convert money. All arithmetic, crossing times and ledger quantities use exact rational values; chart positions and rounded display are presentation only. Scenario bounds are user assumptions, not probabilities or confidence intervals.
Limits: 1–20 appliances and 1–24 periods. Heat content is positive through 1000000 Btu/US gallon; price is 0–1000000 per US gallon. Initial and reserve amounts are 0–1000000000 US gallons. Appliance input ratings are 0–1000000000 Btu/hour, daily windows 0–24 hours and duty 0–100%. Period factors are 0–2 with lower no greater than upper, subject to the 24-hour effective firing limit. Each duration is a whole number from 1–3660 days and the combined horizon is at most 3660 days. Other numeric inputs accept six decimal places. Zero explicitly disables a load or cost; required blanks remain invalid. A reserve above initial supply is allowed and is reported as already reached.
No tank sizing, safe fill percentage, regulator or pipe sizing, cold-weather vaporization, leak assessment, equipment suitability, heat-loss calculation, useful-heat forecast, safe-operating guarantee or automatic refueling schedule is provided. The reserve is your comparison threshold, not a recommended operating minimum. Verify actual supply and equipment requirements separately.

Worked Example

If you input:

  • Supply: 60 US gal initially; reserve 20 US gal; USD 3/US gal; 91452 Btu/US gal
  • Heater: 91452 Btu/hour fuel input; 2 hours/day window; 50% duty
  • Water heater: 45726 Btu/hour fuel input; 2 hours/day window; 100% duty
  • First period: 10 days; lower factor 0.5 and upper factor 1
  • Second period: 10 days; lower factor 1 and upper factor 1.5

Result:

Each appliance uses 1 US gallon per baseline day, for 2 US gallons/day combined. In the first 10 days the lower/higher scenarios demand 10/20 gallons; the next 10 days demand 20/30 gallons. Total demand is 30/50 gallons and replacement cost is USD 90/150. Remaining supply is 30/10 gallons, with no shortfall. The higher scenario reaches the 20-gallon reserve at day 10 + 20/3 = 50/3, displayed as day 16.6667. The lower scenario does not reach reserve during the 20-day horizon; neither scenario reaches empty. In the shortfall example, initial supply is 25 gallons and reserve is 5. The higher scenario reaches empty at day 10 + 5/3 = 35/3, and its total shortfall is 25 gallons; lower-scenario shortfall is 5 gallons.

Frequently Asked Questions

How do I estimate propane use from appliance Btu ratings?

Multiply the fuel-input Btu/hour rating by actual firing hours, then divide by the supplied Btu per US gallon. This planner derives firing hours from the daily window and duty percentage, with period usage factors applied afterward. Its example heat-content factor is editable.

Should I enter the appliance input rating or heating output?

Enter fuel input. Useful heating output excludes conversion losses and cannot be substituted directly. Applying another efficiency reduction to an input rating would change the fuel accounting incorrectly. Check the rating label and compatible heat-content basis.

Does a 500-gallon tank mean 500 gallons of usable fuel?

Not necessarily, and this planner does not infer supply from tank capacity. Enter measured usable fuel in US gallons. Nominal capacity, allowable filling, liquid level and vapor-delivery performance are different quantities; this tool does not determine them.

What do low and high usage factors represent?

They multiply every appliance’s baseline firing time during the chosen period. They are your demand assumptions rather than weather predictions or statistical bounds. Effective firing hours cannot exceed 24 per day; adjust the factor, baseline hours or duty when that constraint is violated.

Why does changing period order change reserve timing?

Total demand can remain the same while more fuel is used earlier. The planner follows periods chronologically and interpolates within the first period reaching a threshold. It does not use one average rate for the entire horizon to locate crossings.

What does a shortfall mean after the empty point?

It is the projected demand that exceeds the initial supply. Fuel remaining is held at zero, while demand continues to be counted so the unmet amount stays visible. This is not a claim that an appliance keeps consuming fuel after the supply is depleted.

Why does reserve timing show day zero or not reached?

Day zero means initial supply is already at or below your reserve. Not reached means the projected demand never reaches that threshold within the entered periods. It does not imply infinite supply, and a fractional day is only as realistic as your constant-rate assumptions.

Does the result tell me when it is safe to run or refill equipment?

No. Mathematical inventory does not establish cold-weather vaporization, regulator or pipe capacity, equipment condition or allowable filling. The reserve is user-defined, and the tool does not schedule a delivery or recommend safe operating limits.

Similar Calculators