Ductwork Replacement Cost & Takeoff Calculator

Build a measured inventory of straight HVAC duct runs and fittings, then mark which groups each quote replaces. Separate the surface of new straight duct from measured labor length and counted fittings. Review how differences in included work, material allowance, labor and fixed charges change the totals.

Ductwork project planning

Compare ductwork replacement quotes

Measure straight duct and fittings once, then compare which groups each quote covers and what the entered work costs.

Total cost and replacement scope

93 ft in measured inventory · 11 fittings

Quote A

$5,905.11

93 ft included · 11 fittings

305.097 ft² straight area before allowance

Quote B

$5,081.51

78 ft included · 9 fittings

225.097 ft² straight area before allowance

Quotes cover different measured groups

Quote B minus A -$823.60

78 ft included by both. 15 ft only in A and 0 ft only in B.

Measure duct groups

Group identical straight runs. Count fittings once across the group, and mark which quote includes it.

Group 1
Main trunk
Group 2
Supply branches
Group 3
Return trunk
Edit material, labor and fixed charges

Use quoted rates or explicit estimates. Enter zero for components already included in another charge.

Quote A
Quote B

Where each quote spends

Cost categories across both quotes in USD
CostQuote AQuote B
Straight duct material$2,221.11$1,762.51
Installation labor$2,232.00$2,028.00
Removal labor$744.00$585.00
Fittings$528.00$486.00
Fixed charges$180.00$220.00
Show measured takeoff ledger

Included in both

2 groups · 78 ft

225.097 ft² · 9 fittings

Only Quote A

1 groups · 15 ft

80 ft² · 2 fittings

Only Quote B

0 groups · 0 ft

0 ft² · 0 fittings

Included in neither

0 groups · 0 ft

0 ft² · 0 fittings

  • Main trunk

    18 × 10 in · 1 × 24 ft

    112 ft² straight · 3 fittings

    Quote A includes · Quote B includes

  • Supply branches

    8 in diameter · 3 × 18 ft

    113.097 ft² straight · 6 fittings

    Quote A includes · Quote B includes

  • Return trunk

    20 × 12 in · 1 × 15 ft

    80 ft² straight · 2 fittings

    Quote A includes · Quote B excludes

Quote A allocates 341.709 ft² with 12% straight material allowance.

Quote B allocates 243.105 ft² with 8% straight material allowance.

Export quote comparison

Download ductwork quote CSV
Show selectable CSV

How to use this calculator

  1. Use Partial vs full replacement to compare different work, or Match the replacement scope to apply both quotes to every group.
  2. Open each duct group to enter a name, round or rectangular outside dimensions and straight length per identical run.
  3. Enter the number of identical runs and the total counted fittings across that group. Mark which quote includes the work.
  4. Open Edit material, labor and fixed charges. Enter each quote’s straight materials and allowance, labor per linear foot, cost per fitting and any fixed charges.
  5. Review the common scope, compare the cost categories and use the takeoff ledger or CSV to retain the measurements and quote rates.

The Formula

The mathematical logic powering this calculation is:

For a group with n identical runs of length L feet each, measured linear footage is n × L. Round duct with outside diameter D inches has developed straight side area πD × nL ÷ 12 ft². Rectangular duct with outside width W and height H inches has developed area 2(W + H) × nL ÷ 12 ft². These are lateral surfaces, so open ends and fittings have no straight-area contribution. Enter the counted fittings once for the entire group.
For each quote, sum the length, straight area and fittings of the groups it includes. Allocated straight material area equals the included area × (1 + straight material allowance/100). Straight material cost equals allocated area × its entered rate. Installation and removal are separate amounts based on the same included linear length. Fitting cost equals the entered fitting count × the per-fitting price. Add the entered fixed charge to the four quantity-driven components. Material, installation and removal are each rounded half up to cents after aggregating their total quantities. The circular constant uses 15 decimal places.
The scope check uses group identity. Two quotes can include the same total length and still cover different groups. Compare the both, A-only, B-only and neither quantities before interpreting the signed difference, which is Quote B minus Quote A.
The model accepts 1–8 groups. Outside dimensions are 0.5–72 in, individual length 0.1–500 ft, count 1–100 and fittings 0–1,000 per group. Measured dimensions and allowance accept up to three decimal places. Allowance is 0–100%. USD prices accept cents, with maximums of $500/ft² for straight material, $1,000/ft each for installation and removal, $5,000 per fitting and $100,000 fixed per quote. Zero rates and explicit all-retained scopes are valid, and fixed charges can remain.
This is a budget takeoff for straight constant-profile sections with user-entered fittings. Seams, fabrication overlap and cuts are handled by the entered straight material allowance. Individual piece nesting, duct sizing, material gauge, performance and installation requirements are outside this model. Include disposal, access work, tax and additional quoted scope in the appropriate charge if applicable. All example prices are illustrative.

Worked Example

If you input:

  • Main trunk: 24 ft at 18 × 10 in, 3 fittings, both quotes
  • Supply branches: Three 18 ft runs at 8 in round, 6 fittings total, both quotes
  • Return trunk: 15 ft at 20 × 12 in, 2 fittings, Quote A only
  • Quote A rates: 12% allowance, $6.50/ft² material, $24/ft installation, $8/ft removal, $48 per fitting, $180 fixed
  • Quote B rates: 8% allowance, $7.25/ft² material, $26/ft installation, $7.50/ft removal, $54 per fitting, $220 fixed

Result:

Quote A covers 93 ft, about 305.097 ft² of straight duct and 11 fittings for $5,905.11. Quote B covers 78 ft, about 225.097 ft² and 9 fittings for $5,081.51. At the same rates, including the return trunk in Quote B changes its total to $6,318.41, which is $413.30 above Quote A.

Frequently Asked Questions

How is ductwork square footage different from linear footage?

Linear feet measure the length along the straight duct. Developed square feet measure the area around the outside perimeter over that length. Larger dimensions use more square feet at the same length, and the labor rates in this calculator use linear feet.

How do I account for elbows, boots and transitions?

Enter the total fittings counted across a group. The quote applies one entered price per fitting, separate from its straight material. If your fitting prices vary, use a defensible blended price or include separately priced fitting work in fixed charges and leave the corresponding rate at zero.

Why can a lower ductwork quote cost more after matching scope?

A smaller quote may cover fewer measured groups. In the worked example Quote B excludes the return trunk, then overtakes Quote A when both quote the same inventory.

What if an installer quotes a bundled labor and material charge?

Assign the bundle to an appropriate rate or fixed charge and enter zero for separately counted components already covered. The calculator adds every amount entered.

What is the difference between straight area and allocated area?

Straight area is the lateral geometric area. Allocated area adds the chosen allowance for fabrication overlap, seams or cuts. Enter a percentage that matches the quote assumptions. The worksheet uses square footage and has no sheet or stick cut optimizer.

Can I model existing and replacement dimensions separately?

Each measured group supplies one proposed straight geometry and one length. The modeled installation and removal share that length. If old and new quantities differ, use an entered fixed adjustment with an explained quote basis or price the difference separately.

Similar Calculators