Cabinet Layout Fit & Installation Quote Planner

Use the same measured room for two cabinet installation layouts. Compare closed and open clearance around drawers and appliances, see where opposing fronts touch or overlap, and verify whether the remaining space clears your entered target. Price cabinet counts, installation and other written charges separately.

Kitchen layout

Compare cabinet fit, open fronts and quotes

Plot two measured wall runs. See where drawers or appliances consume the aisle, then compare the entered cabinet installation prices.

Aisle clearance and installed quote

Proposal A

Closed minimum
41.5 in
Viewed minimum
-1.5 in
Projection result
Projected overlap
Written quote
$2,500.00

Proposal B

Closed minimum
41.5 in
Viewed minimum
16.5 in
Projection result
Meets entered clearance
Written quote
$2,550.00 known

Review clearance before ranking both written costs.

Open-front comparison

All entered open fronts extend together. Compare this with each front open by itself.

Edit room and proposals

Shared room and aisle target

Measure the finished room. Use the same run-axis origin on both opposing walls. The aisle target is your planning value.

Proposal A

Proposal A cabinet and appliance footprints

Start position and width run along the wall. Both reaches use the same finished wall datum. The entered open front extends straight into the aisle within that item’s width.

Item 1

Item 2

Item 3

Item 4

Item 5

Proposal A installation and written charges

Proposal B

Proposal B cabinet and appliance footprints

Start position and width run along the wall. Both reaches use the same finished wall datum. The entered open front extends straight into the aisle within that item’s width.

Item 1

Item 2

Item 3

Item 4

Item 5

Proposal B installation and written charges

Opposing cabinet runs and clearance

Filled shapes are closed footprints. Dashed extensions mark open fronts. Hatching marks projected overlap and a solid line marks exact contact.

Proposal A

First wall · station 0 to 120 in90 in wall to wall
Proposal A room plan, all entered fronts open, projected overlap.

Opposite wall

Aisle target
16 in
Margin vs. target
-17.5 in
Exact-contact span
0 in
Projection intrusion
35.8125 in²

Closest at 39 in to 62.875 in along the run.

Show proposal a station ledger
0 in to 9 inFirst wall · Opposite wall
90 in
9 in to 36 inLeft base · Opposite wall
66 in
36 in to 39 inLeft base · Drawer base
24 in
39 in to 62.875 inDishwasher · Drawer base
-1.5 in
62.875 in to 66 inFirst wall · Drawer base
48 in
66 in to 96 inRight base · Plain base
42 in
96 in to 120 inFirst wall · Opposite wall
90 in

Proposal B

First wall · station 0 to 120 in90 in wall to wall
Proposal B room plan, all entered fronts open, meets entered clearance.

Opposite wall

Aisle target
16 in
Margin vs. target
0.5 in
Exact-contact span
0 in
Projection intrusion
0 in²

Closest at 39 in to 62.875 in along the run.

Show proposal b station ledger
0 in to 9 inFirst wall · Opposite wall
90 in
9 in to 36 inLeft base · Opposite wall
66 in
36 in to 39 inLeft base · Plain base
42 in
39 in to 62.875 inDishwasher · Plain base
16.5 in
62.875 in to 66 inFirst wall · Plain base
66 in
66 in to 96 inRight base · Drawer base
24 in
96 in to 120 inFirst wall · Opposite wall
90 in

Cabinet installation quote and export

The cabinet count follows the authored items. Appliance and fixed obstacle footprints do not add cabinet prices. A separate unpriced line leaves the complete total open.

Proposal A

Cabinets
4
Known subtotal
$2,500.00
Complete quote
$2,500.00
Show proposal a quote lines
Left base
$350.00
Right base
$350.00
Drawer base
$450.00
Plain base
$350.00
Installation labor × 4
$900.00
Fillers and trim
$100.00
Delivery
Included
Other written charges
Included

Proposal B

Cabinets
4
Known subtotal
$2,550.00
Complete quote
Pending
Show proposal b quote lines
Left base
$350.00
Right base
$350.00
Drawer base
$500.00
Plain base
$350.00
Installation labor × 4
$900.00
Fillers and trim
$100.00
Delivery
Unpriced
Other written charges
Included
Download cabinet comparison CSV
Show selectable CSV text

Compare entered plan projections at one reference layer. Actual swings, other heights, installation conditions and accessibility need separate review.

How to use this calculator

  1. Enter the room length and finished width across the opposing runs. Set the remaining aisle you want to compare.
  2. For each proposal, enter measured cabinet, appliance and fixed obstacle footprints using the same station orientation on both walls.
  3. For a supported open front, enter its wall-to-edge reach from the same datum as the closed reach and within the item’s lateral width.
  4. Select all fronts closed, a single entered front open, or all entered fronts open. Review the plan drawing and controlling aisle intervals.
  5. Enter the cabinet, labor and other written charges. Compare the open cost items and download the room, station states and quotes as CSV.

The Formula

The mathematical logic powering this calculation is:

Use one shared rectangle with two opposing finished walls. Enter each fixed footprint along a single common station axis. An item uses its actual exterior width and wall-to-front closed reach, including applicable installed offsets, faces and handles. An optional open reach uses the same wall datum. The open extension is an entered rectangle within the item's lateral width. It represents one declared opening position in a horizontal projection.

Room stations divide at every footprint start or end. In each interval, subtract the two facing reaches from the measured wall-to-wall width. A bare wall contributes zero reach. The operating view uses closed footprints except for the selected or enabled open fronts. Calculate a closed baseline separately. The minimum over all positive-width intervals identifies the closest section. The margin is that gap minus your requested aisle. A positive gap matching a positive request passes the numerical comparison. Zero geometric gap is exact contact. A negative gap is projected overlap or reach beyond the opposite wall. The intrusion area sums the absolute negative gap multiplied by each affected interval width. Along-wall touching edges have no positive-width overlap. Footprints that overlap each other on one wall or closed items outside the room require corrected inputs.

Only cabinet items add cabinet prices. Installation can use a unit rate per cabinet or a fixed project amount. Enter fillers and trim, delivery and other charges. An included line adds zero incremental price. Unpriced work is kept open and leaves only a known subtotal. The cost difference compares complete proposals whose viewed arithmetic clears the entered aisle. Appliance and fixed-obstacle footprints do not infer an item price.

Supports one to twelve footprints per proposal and at least one cabinet. Measurements use up to three decimals in inches. Length and width each support 1–1,200 in. Prices use cents. Set the aisle request using your documented planning scope. Projected figures do not verify opening paths, upper and lower height interactions, actual installation compatibility, accessibility or code.

Worked Example

If you input:

  • Shared room: 120 in long and 90 in wall to wall. Illustrative remaining aisle request is 16 in.
  • Appliance: Whirlpool reference body 23.875 in wide, closed depth 24.5 in, open depth 49.5 in.
  • Opposing cabinet: A aligns an entered 42 in open drawer reach with the dishwasher. B locates it farther along the run.
  • Written charges: A complete price $2,500. B has $2,550 in known charges and open delivery.

Result:

Both layouts leave 41.5 in at the narrowest station with fronts closed. With all entered fronts open, A has a 1.5 in projected overlap across 23.875 in of the run. B leaves a 16.5 in minimum. Both cost figures stay visible while the A clearance and B delivery differ.

Frequently Asked Questions

What does a negative clearance mean?

The entered rectangles overlap in their top-view projection at one or more stations, or one front projects past the room. Review actual positions and heights before drawing an installation conclusion.

How is exact contact treated?

An exact zero aisle is contact. It remains a separate result when the requested clearance is zero. A positive aisle at the requested threshold clears the numeric check.

Which dishwasher depth should I enter?

Use measured reaches from the finished wall, or combine documented closed and open dimensions with the matching installed setback. A model’s body depth, door-open depth and cabinet cutout width measure different things.

Can I compare hinged doors or an island?

Only when your entered items can be represented as wall-anchored rectangular reaches within their own width. Rotating doors that extend sideways, freestanding obstructions and room returns need a different model.

Can open heights resolve a projected overlap?

The worksheet compares horizontal projected footprints. Actual heights or sweep paths may change how the parts interact. Use the actual layout and equipment specifications for that review.

What if a quote leaves delivery unpriced?

Keep the delivery line Unpriced to retain the known subtotal and identify the open item. An included charge has been confirmed elsewhere in the quote.

Similar Calculators