Window Replacement Cost & Quote Calculator
Compare actual entered window replacement prices for the same openings, instead of relying on an unexplained average cost per window. This planner handles up to four quotes and twelve opening groups, separating product and installation prices from fixed costs, discounts, contingency, entered taxes and upfront rebates. Quotes-only mode works without window dimensions or energy assumptions. Optional heating mode uses whole-window area, whole-product U-factor, annual heating degree days and a seasonal heating ratio to explore conduction-only heating costs. Compare signed savings, simple and discounted payback, and cumulative nominal and discounted values over one to fifty years. A lower quote or higher modeled net present value does not establish better installation quality, suitability, warranty or comfort. Examples are illustrative editable assumptions, not market prices. This tool does not forecast actual whole-home bill savings, retrieve climate or tariff data, determine tax or rebate eligibility, or provide ordering measurements.
Compare the quote, then test the savings
Compare the same openings across up to four quotes. Separate products, installation and allowances; optionally explore conduction-only heating savings over time.
Examples are editable illustrations, not market prices or promised savings. Dimensions describe whole-window area, not ordering measurements.
Set up your comparison
Currency changes labels only. Unit changes preserve quantities exactly; converted fractions may appear in fields. Enter up to six decimal places or an exact fraction. Counts and years must be whole numbers. Blank required inputs pause results.
Shared opening groups
Group windows with the same size and current whole-product U-factor. Every quote uses these same quantities. Use 1–12 groups, each with 1–1000 windows.
Supplier quotes
1–60 characters; use a supplier or option name.
Disposal, permits or other entered fixed scope; 0–1 billion.
Cannot exceed products + installation + fixed costs.
0–100%; applies to the discounted pretax subtotal.
Enter the actual tax amount; no tax rule is inferred.
Assumed at year zero; eligibility is not inferred. Cannot exceed gross cost.
Optional heating assumptions
This is a conduction-only degree-day comparison. It excludes air leakage, solar gains, cooling, installation defects and whole-home interactions. Use a consistent annual climate period and base temperature. No weather or energy tariff is inferred.
0–20,000 °C days equivalent; source a local annual total with a stated base temperature.
Greater than 0 and at most 20. Enter efficiency or seasonal COP, not a percent.
0–100; convert fuel units to purchased kWh before entering.
−20 to 20; nominal annual change. Negative values model falling prices.
0–30; nominal basis consistent with energy-price change.
Whole number from 1 to 50; annual savings occur at year end.
Compare costs and modeled value
Lowest cost and highest modeled net present value do not rank warranty, installation quality, suitability or comfort. Exact ties are retained even when displayed values round alike.
Quote A
Net upfront cost
4516 USD
Lowest entered upfront cost
- First-year modeled heating savings
- 84.96 USD/year
- 20-year net present value
- −3148.85 USD · Highest modeled NPV
- Simple payback (flat first-year savings)
- 53.1544 years
- Discounted payback (whole-year crossing)
- Not reached within the entered horizon
Quote B
Net upfront cost
5306 USD
- First-year modeled heating savings
- 108 USD/year
- 20-year net present value
- −3568.1 USD
- Simple payback (flat first-year savings)
- 49.1296 years
- Discounted payback (whole-year crossing)
- Not reached within the entered horizon
Where the selected quote's cost comes from
Quote A. Each bar connects the subtotal before and after a cost adjustment. Discounts and rebates move left. Allowance is applied before entered tax.
| Quote | Products (USD) | Installation (USD) | Fixed (USD) | Subtotal (USD) | Discount (USD) | Discounted base (USD) | Allowance (USD) | Tax (USD) | Gross (USD) | Rebate (USD) | Net upfront (USD) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Quote A | 2800 | 1160 | 100 | 4060 | 0 | 4060 | 406 | 50 | 4516 | 0 | 4516 |
| Quote B | 3640 | 1220 | 100 | 4960 | 0 | 4960 | 496 | 50 | 5506 | 200 | 5306 |
| Opening | Count | Products (USD) | Installation (USD) | Area (m²) | Proposed U (W/m² K) | Conduction heat (kWh/year) |
|---|---|---|---|---|---|---|
| Living room | 4 | 2000 | 800 | 7.2 | 1.4 | 604.8 |
| Bedroom | 2 | 800 | 360 | 2.4 | 1.3 | 187.2 |
Conduction heat by opening group
Quote A compared with the current windows. This is thermal heat through the windows, before the seasonal heat ratio. Whole-window area totals 9.6 m². Bars share one scale; a larger replacement bar means more modeled heat loss.
Living room
Current: 1209.6 kWh/year
Replacement: 604.8 kWh/year
Bedroom
Current: 432 kWh/year
Replacement: 187.2 kWh/year
| Alternative | Conductance (W/K) | Thermal heat (kWh) | Purchased energy (kWh) | Heating cost (USD) | Savings vs current (USD) |
|---|---|---|---|---|---|
| Current windows | 27.36 | 1641.6 | 547.2 | 164.16 | 0 |
| Quote A | 13.2 | 792 | 264 | 79.2 | 84.96 |
| Quote B | 9.36 | 561.6 | 187.2 | 56.16 | 108 |
Cumulative savings after upfront cost
Solid lines include energy-price change; dashed lines also discount future savings. Year zero includes net upfront cost. Above zero means cumulative savings have covered that cost within this model. Negative annual savings remain negative.
Solid = nominal; dashed = discounted. For alternatives with identical paths, use the labeled comparison cards and selected-quote schedule.
| Year | Savings (USD) | Discounted savings (USD) | Cumulative nominal (USD) | Cumulative discounted (USD) |
|---|---|---|---|---|
| 0 | 0 | 0 | −4516 | −4516 |
| 1 | 84.96 | 81.6923 | −4431.04 | −4434.31 |
| 2 | 86.6592 | 80.1213 | −4344.38 | −4354.19 |
| 3 | 88.3924 | 78.5805 | −4255.99 | −4275.61 |
| 4 | 90.1602 | 77.0693 | −4165.83 | −4198.54 |
| 5 | 91.9634 | 75.5872 | −4073.86 | −4122.95 |
| 6 | 93.8027 | 74.1336 | −3980.06 | −4048.82 |
| 7 | 95.6788 | 72.708 | −3884.38 | −3976.11 |
| 8 | 97.5923 | 71.3098 | −3786.79 | −3904.8 |
| 9 | 99.5442 | 69.9384 | −3687.25 | −3834.86 |
| 10 | 101.535 | 68.5935 | −3585.71 | −3766.27 |
| 11 | 103.566 | 67.2743 | −3482.15 | −3698.99 |
| 12 | 105.637 | 65.9806 | −3376.51 | −3633.01 |
| 13 | 107.75 | 64.7118 | −3268.76 | −3568.3 |
| 14 | 109.905 | 63.4673 | −3158.85 | −3504.83 |
| 15 | 112.103 | 62.2468 | −3046.75 | −3442.59 |
| 16 | 114.345 | 61.0497 | −2932.41 | −3381.54 |
| 17 | 116.632 | 59.8757 | −2815.77 | −3321.66 |
| 18 | 118.965 | 58.7242 | −2696.81 | −3262.94 |
| 19 | 121.344 | 57.5949 | −2575.47 | −3205.34 |
| 20 | 123.771 | 56.4873 | −2451.7 | −3148.85 |
Keep your comparison
Export all inputs, quote and opening results, assumptions and every annual schedule. Exact fractions preserve precision; values on this page use six significant digits. No data is sent to suppliers.
How to use this calculator
- Start with Heating comparison example or Quotes only example. Select Comparison mode, Thermal input units and Currency label. Currency is a label; unit changes preserve physical quantities and may display exact fractions.
- Create Shared opening groups. Enter Opening name and Number of windows. In heating mode also enter Whole-window width, Whole-window height and Current U-factor, including the frame. These area dimensions are not ordering measurements.
- Choose Quote to edit and inspect. Enter product and installation prices per window for each group, plus fixed costs, quoted discount, contingency percentage, actual tax amount and upfront rebate. Add alternatives to compare the same openings; all required new fields start blank.
- For heating mode, enter annual heating degree days from a consistent local climate period and base temperature, seasonal delivered / purchased heat ratio, price per purchased kWh, annual energy-price change, discount rate and comparison horizon. Use whole-product proposed U-factors for each quote.
- Compare upfront costs, the selected quote's cost waterfall and complete breakdown. In heating mode inspect opening heat loss, signed annual savings, cumulative curves and the selected quote's annual schedule. Lowest cost and highest modeled NPV are financial comparisons, not quality ratings.
- Download window comparison CSV or Show copyable CSV to keep all inputs and exact results for every quote and year. Correct required blank or invalid fields before exporting. A rejected unit transition preserves the current entries and units.
The Formula
The mathematical logic powering this calculation is:
Product and installation totals = sum(quantity × corresponding per-window price). Subtotal = products + installation + fixed project costs. Discounted base = subtotal − quoted discount. Contingency allowance = discounted base × contingency percentage / 100. Gross = discounted base + allowance + entered tax amount. Net upfront cost = gross − entered upfront rebate. No tax or rebate entitlement is inferred.
Whole-product area A = quantity × width × height, converted to m². Conductance = sum(A × whole-product U), in W/K. Annual conduction heat = conductance × annual HDD in °C days × 24 / 1000, in kWh. Purchased heating energy = conduction heat / seasonal delivered-to-purchased heat ratio. Heating cost = purchased kWh × entered price per purchased kWh. First-year savings S = current-window cost − replacement-window cost. Negative savings are retained.
For year t ≥ 1, annual saving = S × (1 + e)^(t − 1), with nominal annual energy-price change e. Discounted saving = annual saving / (1 + r)^t, with nominal discount rate r. Cumulative nominal and discounted values start at −net upfront cost in year zero and add their respective annual savings. Net present value is final cumulative discounted value. Simple payback = net upfront cost / S when S > 0; it assumes flat first-year savings and ignores discounting. Discounted payback is the first whole year whose cumulative discounted value is nonnegative. Zero upfront cost with nonnegative savings gives zero payback. Otherwise nonpositive savings have no modeled payback; positive savings may not pay back within the selected horizon.
Imperial dimensions are inches (1 inch = 0.0254 m). US U-factor uses Btu_IT/(h ft² °F), converted with 1 Btu_IT = 1055.05585262 J, 1 foot = 0.3048 m, and temperature differences of 5/9 K per °F. Fahrenheit degree days convert by 5/9 without a temperature offset.
This conduction-only degree-day approximation excludes air leakage, solar gains, cooling, orientation, shading, whole-home interactions and installation defects. It is not the whole-home simulation used in official ENERGY STAR savings estimates. It also excludes financing, maintenance, degradation, replacement cycles and resale value. Rebates and upfront costs occur at year zero; savings occur at each year end. Exact arithmetic is retained internally and in CSV; visible numbers use six significant digits.Worked Example
If you input:
- Opening groups: 4 living-room windows, 1.2 × 1.5 m, current U 2.8; 2 bedroom windows, 1 × 1.2 m, current U 3 W/(m² K)
- Quote A per-window prices: Living room: product 500 + installation 200 USD; bedroom: product 400 + installation 180 USD
- Quote A adjustments: Fixed 100, discount 0, tax 50, rebate 0 USD; contingency 10%
- Quote A proposed U-factors: Living room 1.4; bedroom 1.3 W/(m² K)
- Heating assumptions: 2500 °C days/year; seasonal ratio 3; 0.30 USD/purchased kWh; 2% annual price change; 4% discount; 20 years
- Quote B: Living room 650 + 210 USD, U 1; bedroom 520 + 190 USD, U 0.9; same adjustments except 200 USD rebate
Result:
Total window area is 9.6 m². Quote A products cost 2800 USD, installation 1160 USD and fixed costs 100 USD. The 4060 USD subtotal receives a 406 USD contingency allowance and 50 USD tax, giving 4516 USD net upfront. Current modeled conduction heat is 1641.6 kWh/year; Quote A reduces it to 792 kWh/year. At seasonal ratio 3 and 0.30 USD per purchased kWh, first-year heating savings are 84.96 USD. Simple payback is about 53.1544 years, and discounted payback is not reached within 20 years. Quote B costs 5306 USD upfront and models 108 USD first-year heating savings. Quote A is cheaper upfront. These are conduction-only illustrative results, not promised utility-bill savings.
Frequently Asked Questions
Does this estimate local window replacement prices?
No. Enter actual supplier prices or your own explicit planning assumptions. The examples are not regional cost data. Product type, dimensions, access, frame work, disposal, permits and installation scope affect real quotes. Compare the same openings and inclusions, and confirm scope directly with suppliers.
Can I compare quotes without knowing U-factors or energy data?
Yes. Quotes only requires quantities and cost inputs but ignores dormant thermal fields. Switching heating on reactivates their validation. Cost results include the entered discount, contingency, tax and rebate without inventing missing values.
Why are these not predicted whole-home energy savings?
The model covers conduction through whole-window area using annual degree days. It omits air leakage, solar gain, cooling and interactions with the rest of the building. Official whole-home estimates use more detailed simulation. Actual bills also depend on weather, controls, occupancy and the heating system. Use the result to explore assumptions, not as a guarantee.
Which U-factor and dimensions should I enter?
Use comparable whole-product U-factors including the frame and spacers, not center-of-glass values. Enter whole-window area dimensions, not ordering or cutting measurements. Metric U is W/(m² K); US U is Btu_IT/(h ft² °F). The unit selector converts populated values exactly, including degree-day temperature differences.
What heating degree days and heating ratio should I use?
Use a local annual heating-degree-day total with a known base temperature and period. The tool does not infer weather. Seasonal delivered/purchased heat ratio is useful heat divided by purchased energy, such as an efficiency ratio or seasonal heat-pump COP; it is not a percentage. Energy price must be per purchased kWh, so convert other fuel billing units before entering them.
How are taxes, rebates and contingency treated?
Discount reduces the product, installation and fixed-cost subtotal. Contingency is a planning allowance on that discounted pretax base, then entered tax is added and an entered upfront rebate is subtracted. The calculator does not compute tax, check rebate eligibility or model delayed credits. Rebates cannot make upfront cost negative.
Why can payback and net present value disagree?
Simple payback divides upfront cost by first-year savings and ignores escalation and discounting. Discounted payback uses annual savings after price change and discounting and reports the first whole-year crossing. Net present value includes upfront cost and all discounted savings through the horizon. Positive savings may not recover the cost within that horizon. Worse proposed U-factors can yield negative savings, which remain visible.
What are the input and comparison limits?
Compare 1–4 quotes for 1–12 groups of 1–1000 windows. Thermal dimensions must be positive and at most 100 m equivalent; U-factors positive and at most 100 W/(m² K) equivalent. HDD supports 0–20000 °C days equivalent, heat ratio above 0 through 20, and purchased-energy price 0–100 currency units/kWh. Price change supports −20% to 20%, discount rate 0–30%, and horizon 1–50 years. Input numbers accept up to six decimals or exact fractions with up to 64 digits per part. A unit conversion beyond that precision is rejected without changing the draft. Financial rankings do not compare quality, safety, warranty or suitability.
Similar Calculators
Bathroom Remodel Cost & Quote Calculator
Compare bathroom remodeling quotes, allowances, changes and missing scope. Plan contingency and contractor payments with a cash timeline, exact tables and CSV.
Insulation Calculator & Package Cost Planner
Plan insulation quantities across zones, compare compatible package sizes and blown-material label limits, and visualize pooled purchasing savings, overage and project costs.
Electricity Cost Calculator
Estimate appliance electricity cost from wattage, daily use, electricity rate, and billing fees.
Home Equity Loan Calculator
Compare a home equity loan with cash-out refinancing at the same net cash. Calculate maximum cash out, monthly payments, fees and remaining mortgage debt.
Paint Coverage Calculator
Estimate paintable wall area, paint needed, gallons to buy, and project cost with room-by-room deductions.
ROI Calculator
Calculate Return on Investment (ROI) to measure the profitability of any investment.
