Storage Unit Layout & Cost Planner

Plan storage around the items you actually have. Enter protected item dimensions, quantities and stacking allowances, then compare measured rectangular storage units and supplied quotes. The planner tries four shelf layouts, reserves a central aisle and wall clearances, and shows the chosen stacks with an equivalent coordinate table. Compare the lowest supplied cost among complete layouts while keeping partial results visible. A complete geometric layout does not guarantee loading access or safe stacking; an incomplete heuristic attempt does not prove the unit is too small. Prices are your inputs, not live provider quotes.

Storage planning studio

See what fits. Compare what it costs.

Test your measured inventory against real unit dimensions, reserve floor space and compare supplied quotes.

A floor plan behind every comparison

Four shelf-packing attempts try upright rectangular item envelopes. A complete layout is a geometric plan, not a guarantee of safe stacking or loading access. An incomplete attempt does not prove a unit is too small.

Lowest supplied complete-layout quote
USD 740
Illustrative medium unit
Physical inventory
15 items
2,148,000 cm³ of item envelopes; volume alone cannot establish fit.
Quote period
6 months
Monthly rent × months + one-time nonrefundable charges.

Compare candidate units

UnitLayout resultItems placedSupplied totalInspect
Illustrative small unitComplete layout not found12 / 15USD 380
Illustrative medium unitLowest complete-layout quoteComplete layout found15 / 15USD 740
Illustrative larger unitComplete layout found15 / 15USD 980

Illustrative medium unit: floor layout

Complete layout found. 15 of 15 items placed in 7 stacks; 0 items remain unplaced.

Top view of Illustrative medium unitEach outlined rectangle is one stack. Packing banks are white; remaining gray floor is reserved or unusable. Exact coordinates and contents are in the table below. Door position and loading paths are not modeled.Desk envelope, stack 1: 1 itemsChair envelope, stack 1: 1 itemsChair envelope, stack 2: 1 itemsProtected boxes, stack 1: 3 itemsProtected boxes, stack 2: 3 itemsProtected boxes, stack 3: 3 itemsProtected boxes, stack 4: 3 items
Width 300 cm; depth 300 cm. Floor proportions shown to scale. Gray space is reserved or unusable, not additional packing capacity. Very small stacks may be invisible at this scale.
  • Protected boxes
  • Desk envelope
  • Chair envelope
Occupied stack footprints
22,400 cm²
Floor covered by placed stacks.
Unused packing floor
44,300 cm²
May be fragmented; not a promise that another item fits.
Height-blocked items
0
Individual item height exceeds the unit height.
Floor budget and solver attempts

Floor 90,000 cm² = wall setback 5,900 + aisle 17,400 + packing banks 66,700 + unusable interior 0. Height-permitted required stack footprints: 22,400 cm²; excludes height-blocked items.

  • area-depth: 15 items; 2,148,000 cm³ placed (selected)
  • area-width: 15 items; 2,148,000 cm³ placed
  • longest-depth: 15 items; 2,148,000 cm³ placed
  • longest-width: 15 items; 2,148,000 cm³ placed

Selected by most physical items, then most envelope volume, then fixed attempt order. These are shelf heuristics, not an exhaustive packing proof.

Chosen stacks — coordinates from the upper-left unit corner, all lengths in cm
Item / stackCountXYWidthDepthStack heightRotated
Desk envelope / 11556012075Yes
Chair envelope / 115125606090No
Chair envelope / 215185606090No
Protected boxes / 136555040120Yes
Protected boxes / 23651255040120Yes
Protected boxes / 33651855040120Yes
Protected boxes / 4352455040120Yes

Keep the complete plan

Export includes original inputs, exact coordinates in cm, all four attempts, unplaced inventory and supplied costs. Displayed values may be rounded; fractions in the CSV retain exact quantities.

How to use this calculator

  1. Load an illustrative example and open Edit inventory and unit quotes. Set the currency label and storage period in whole months.
  2. Enter protected width, depth and upright height for each item type, its physical quantity and a suitable maximum identical-item stack count. Allow floor rotation only when appropriate.
  3. Enter clear measured dimensions and monthly rent for each candidate unit. Add one-time nonrefundable charges and set wall clearance and central aisle width.
  4. Apply storage plan. Compare complete and incomplete layouts and supplied total costs; select View beside a unit to inspect its floor map.
  5. Review stack coordinates, unplaced inventory and solver attempts. Download storage plan CSV or use its selectable copy. Verify actual loading access and stacking suitability separately.

The Formula

The mathematical logic powering this calculation is:

All model geometry is exact in centimetres, cm² and cm³. One inch equals exactly 2.54 cm. Enter upright rectangular protected item envelopes and measured clear unit dimensions. No nesting, dismantling or tilting is inferred.
For each candidate, usable width = width − 2 × wall clearance and usable depth = depth − 2 × wall clearance. Nonpositive usable dimensions or an aisle at least as wide as usable width leave no packing floor. A zero aisle uses one packing bank; a positive aisle reserves a central depthwise strip and creates two equal banks of width (usable width − aisle width) / 2. A strip does not establish access to every item or alignment with a door.
Identical-item stack capacity = min(user maximum stack count, floor(unit height / item height)). A zero capacity marks that item type as height-blocked. Otherwise quantities are split into full stacks and at most one partial stack. A stack retains its item footprint and has height = count × item height. This is a geometric allowance, not a strength or stability check.
Four shelf heuristics combine descending footprint area or descending longest side with a shorter-depth or shorter-width orientation preference. Ties preserve original item order then stack order. Only permitted 90° floor rotations are tried. Each stack tries existing shelves in creation order, then a new shelf in the left and right banks. Shelf depth is fixed by its first stack. Unplaced stacks are retained and smaller stacks are still attempted.
Select the attempt with the most physical items, then the most envelope volume, then the fixed attempt order: area-depth, area-width, longest-depth, longest-width. Complete layout not found is not a proof of impossibility. Neither optimal packing nor the smallest possible storage unit is claimed.
Occupied area is the sum of placed stack footprints. Free packing area = packing bank area − occupied area. Full floor = perimeter setback + aisle + packing banks + unusable interior. Required stack footprints exclude height-blocked items; report those separately. Free area can be fragmented and does not guarantee another item fits. Inventory counts and volumes reconcile to placed plus unplaced.
Supplied total = monthly rent × whole months + one-time nonrefundable charges. Compare costs only among complete layouts, retaining all exact ties. With no complete layout, do not invent a cheapest suitable unit. Quotes do not infer taxes, insurance, deposits, promotions, escalation, availability or climate conditions.
Limits: 1–40 item types, at most 200 physical items, 1–12 units, 1–60 months, and stack limits 1–20. Dimensions are positive up to 10,000 cm equivalent; aisle and clearance may be zero. Length syntax accepts unsigned plain decimals with up to six places or unsigned integer fractions with at most 18 digits in each part and a positive denominator. Quotes are 0–1,000,000,000 with up to two decimals. Unit changes convert every dimension exactly or preserve the entire draft if a dimension is invalid or cannot be represented within the fraction bounds.
Charts and tables use the selected model output. Extreme floor proportions are explicitly compressed in the diagram; very small stacks may be invisible. Tables round for display without hiding a tiny nonzero value. CSV retains original inputs and exact canonical values for all attempts. No door, corridor, loading path, weight, fire-code or accessibility assessment is performed.
Sources reviewed November 13, 2026: Public Storage describes approximate unit sizes that can vary by facility. U-Haul discusses leaving an access aisle; this planner adopts no universal aisle width. NIST supplies exact international length conversions. These sources support those conventions, not the completeness of the packing heuristic or a particular quote.

Worked Example

If you input:

  • Inventory: 12 boxes, each 40 × 50 × 40 cm, maximum stack 3; one 120 × 60 × 75 cm desk; two unstackable 60 × 60 × 90 cm chairs. Boxes and desk may rotate.
  • Clearance and aisle: 5 cm at each wall and a 60 cm central aisle. All units are 240 cm tall.
  • Units and quotes: 150 × 150 cm at USD 60/month; 300 × 300 cm at USD 120/month; 300 × 450 cm at USD 160/month. Each has a USD 20 upfront charge.
  • Storage period: 6 whole months, USD.

Result:

The small unit places the 12 boxes but leaves the desk and two chairs unplaced. Both larger units place all 15 items in seven stacks. The 300 × 300 cm unit has two 115 × 290 cm packing banks: 66,700 cm² of packing floor, with 22,400 cm² occupied and 44,300 cm² unused. Its supplied cost is 6 × USD 120 + USD 20 = USD 740, the lowest complete-layout quote. The small and larger quotes total USD 380 and USD 980. The result is a geometric layout under the entered stacking and clearance assumptions, not a guarantee of loading access.

Frequently Asked Questions

Can I choose a storage unit by volume alone?

No. Item shapes, footprints, upright heights, stacking permissions and reserved floor space affect fit. This planner tests rectangular stacks rather than dividing inventory volume by unit volume.

Does an incomplete layout mean the unit is too small?

No. The four shelf attempts are bounded heuristics. Another arrangement may work. A height-blocked item is explicitly identified, but a generic packing miss is not a proof of impossibility.

Does a complete layout guarantee I can load the unit?

No. Door openings, corridors, turning room, loading order, floor strength and access to individual items are not modeled. Check the site and your items before committing.

How should I enter furniture?

Use its protected upright bounding dimensions. Allow a 90° floor rotation only if appropriate and use a maximum stack count of one for unstackable furniture. Nesting and dismantling are not inferred.

Why do fractions appear after changing units?

The planner preserves exact physical quantities. A decimal in centimetres can require a fraction in inches. Correct invalid dimensions before changing units; otherwise the whole change is refused.

Are unit prices and dimensions supplied by storage providers?

No. Example dimensions and prices are illustrative. Enter measured clear dimensions and your actual quotes. Advertised nominal sizes may differ from the usable interior.

Does the aisle width meet an access requirement?

No. It reserves a central strip of your chosen width only. It does not establish code compliance, door alignment or access to every stack.

What does the CSV contain?

Original inputs, exact canonical geometry in centimetres, all four packing attempts, selected placements, unplaced counts and supplied costs. Display rounding does not alter its exact fractions.

Similar Calculators