Pallet Load Planner
Plan a shipment of identical upright cartons on an entered pallet footprint. Compare uniform and mixed row or column patterns, inspect exact carton positions and repeated layers, and see whether height, stacking count or gross mass limits capacity. The final pallet is shown explicitly, including a partially filled top layer. Switch length and mass units without changing the underlying quantities, then export the inputs, selected coordinates and a complete compressed shipment plan. This is a geometric planning tool, not a pallet strength assessment, freight quote or transport approval.
See how the shipment stacks up
Compare carton layouts, find the limit that matters, and inspect the last pallet before you pack. One upright carton size; exact fit decisions; a complete, reusable packing plan.
Your pallet and cartons
Use actual outside carton dimensions. Entered limits are your assumptions, not a pallet rating or a carrier rule. Blank fields pause the plan.
3 pallets for 31 cartons. 15 cartons per full-capacity pallet.
Pallets for this order
3
31 cartons total
Capacity per pallet
15
3 per layer · up to 5 layers
Shipment gross mass
370 kg
3 pallet tares included
What limits this load?
Total height determines capacity for the selected pattern.
- Footprint × allowed layers
- 3 × 5 = 15
- Payload allows
- 18 cartons
- Area-only layer bound
- 4 cartons
The area bound ignores shape, gaps and packing. The selected pattern is not proof of a globally optimal layout or a safe stack.
Follow a carton through the stack
2 full-capacity pallets, then 1 final pallet.
1 of 3 positions occupied. Blue: normal; striped: rotated; amber: selected; dashed: empty.
Vertical scale shows height. Bar width shows occupied positions per layer, not physical carton width.
Position 1: normal orientation, footprint 600 × 400 mm; origin (0, 100) mm. Layer 1: 100–300 mm above the pallet base. This is a partial layer.
Layers repeat the same positions, so cartons above have a corresponding position below. Carton strength, load balance, wrapping and stability are not modeled.
Compare packing patterns
Ranked by cartons per layer, then fewer rotated cartons. Mixed rows and columns are a defined family, not every possible packing. Selecting an alternative updates the entire plan.
| Pattern | Normal / rotated bands | Cartons / layer | Rotated cartons | Inspect |
|---|---|---|---|---|
| columns · highest count | 1 / 1 | 3 | 1 | |
| rows | 1 / 1 | 3 | 2 | |
| rows | 2 / 0 | 2 | 0 | |
| rows | 0 / 1 | 2 | 2 | |
| columns | 0 / 2 | 2 | 2 |
Packing coordinates
Occupied positions on inspected layer 1. Origins are measured from the top-view pallet’s upper-left corner. Dimensions below use mm; CSV retains exact canonical values.
| Position | Orientation | X / Y (mm) | Footprint (mm) |
|---|---|---|---|
| Normal | 0 / 100 | 600 × 400 |
Full and final pallet
| Load | Repeated | Cartons | Layers | Height (mm) | Gross (kg) |
|---|---|---|---|---|---|
| Full-capacity | 2 | 15 | 5 | 1,100 | 170 |
| Final | 1 | 1 | 1 · partial top | 300 | 30 |
Take the packing plan with you
CSV contains all inputs, candidate patterns, the selected exact coordinates, layer prefixes, and a complete shipment manifest using repeated loads. This keeps even a large order compact and reproducible.
How to use this calculator
- Choose Length units and Mass units. Enter the outside Carton length, Carton width, Upright carton height, Mass per carton and Order quantity. Allow 90° footprint rotation only when suitable for your cartons.
- Enter Pallet length, Pallet width, Pallet deck height and Pallet tare mass. Set Edge clearance per side, Gap between cartons and Gap between layers; zero means no allowance.
- Enter your Maximum total loaded height, Maximum gross pallet mass and Maximum stacking layers. These are supplied constraints, not inferred safety limits. Read What limits this load?
- Compare packing patterns and use a pattern to recalculate the shipment. Inspect the Final shipment pallet or Full-capacity template. Move Inspect layer and Inspect carton position to link the diagrams and coordinate table.
- Review Full and final pallet to reconcile the carton count, height and gross mass. A final pallet can be full or can contain a partial top layer.
- Download pallet CSV or show its copyable version. It includes all canonical inputs, candidate counts, exact selected coordinates, layer prefixes and repeated-load counts sufficient to reconstruct the shipment.
The Formula
The mathematical logic powering this calculation is:
All lengths use canonical mm; masses use kg.
L,W = pallet length,width; e = edge clearance
X = L − 2e; Y = W − 2e
a,b = upright carton footprint; g = carton gap
Normal cartons per row = floor((X+g)/(a+g))
Rotated cartons per row = floor((X+g)/(b+g))
Feasible nonempty row counts r0,r1 satisfy:
r0(b+g) + r1(a+g) − g ≤ Y
For each r0, fill the most feasible r1 rows.
Also test transposed columns if rotation is allowed.
Center each row and the complete block.
Rank by count, then fewer rotated cartons,
then rows before columns, then normal-row count.
This searches only the declared pattern family.
H = total height limit; d = pallet height
c = carton height; v = layer gap
If H < d+c, no layer fits. Otherwise:
height layers = floor((H−d+v)/(c+v))
A = min(height layers, entered layer limit)
N = cartons per layer in the selected pattern
Geometric capacity = N × A
G = gross mass limit; T = tare; m = carton mass
Mass capacity = floor((G−T)/m)
C = min(geometric capacity, mass capacity)
If C = 0, no shipment can be constructed.
Q = order quantity; P = ceil(Q/C)
Repeat P−1 full-capacity pallets.
Final pallet cartons q = Q − (P−1)C
For any q-carton load, layers n = ceil(q/N).
Repeat one pattern; fill the final layer prefix.
Loaded height = d + nc + (n−1)v
Gross pallet mass = T + qm
Gross shipment mass = Qm+PT
Fit decisions: 1,000,000 length ticks per mm.
Mass decisions: 1,000,000,000,000 ticks per kg.
Centered coordinates retain half-length ticks.
1 inch = 25.4 mm; 1 pound = 0.45359237 kg.
Converted displays retain exact source quantities.Worked Example
If you input:
- Pallet footprint / deck height: 1000 × 1000 mm / 100 mm
- Carton footprint / upright height: 600 × 400 mm / 200 mm
- Edge, carton and layer gaps: 0 mm
- Maximum loaded height / layers: 1100 mm / 10
- Carton mass / pallet tare / gross limit: 10 kg / 20 kg / 200 kg
- Order quantity / footprint rotation: 31 cartons / allowed
Result:
A uniform unrotated grid fits two cartons per layer. A mixed pattern fits three; the selected column pattern has two normal cartons and one rotated carton. Total height permits five layers, giving 15 cartons; payload permits 18, so height limits capacity. The order uses three pallets: 15 + 15 + 1 cartons. Full pallets are 1100 mm tall and 170 kg gross; the final pallet is 300 mm tall and 30 kg gross. Total gross shipment mass is 370 kg. In the weight-limited example, changing the gross limit to 145 kg gives 12 + 12 + 7 cartons on the same three pallets.
Frequently Asked Questions
Does this find the absolute maximum number of boxes on any pallet?
No. It searches a defined family of uniform and mixed row/column patterns with upright cartons. It does not search arbitrary placements, tilted cartons, mixed carton sizes or interlocked layers. The area-only bound ignores shape and gaps; reaching or approaching it is not a structural or packing approval.
Can I use a standard Euro pallet or a 48-by-40-inch pallet?
Enter its actual dimensions and tare, then supply appropriate load limits. EPAL lists an 800×1200 mm footprint and 144 mm height for its Euro pallet. That dimensional reference is not the default example and does not establish the capacity of an arbitrary pallet. The planner does not apply a universal pallet rating.
Why can rotation or a small gap change the count abruptly?
Carton counts are whole numbers. A normal row and a rotated row can sometimes use the footprint better together, but a small added gap or clearance can make that combination stop fitting. Exact decimal arithmetic determines these boundaries; displayed rounding does not decide whether a carton fits.
What does the layer profile show?
Its vertical scale uses actual pallet and carton heights, including layer gaps. Each horizontal bar shows the fraction of positions occupied on that layer; it is not a physical side silhouette. The top view and coordinate table supply the actual footprint geometry. Inspect the final pallet to see partial layers.
Does a repeated pattern mean the stack is safe?
No. Repeating positions ensures a geometric correspondence with the layer below. It does not assess carton compression strength, pallet condition, center of mass, tipping, wrapping, restraint, handling or carrier requirements. FedEx distinguishes column and interlocking constructions in its packing guidance; this planner models repeated upright positions only.
Why does the final pallet sometimes equal a full pallet?
The compressed manifest always lists P−1 full-capacity loads followed by one final load. If the order divides capacity exactly, that final load is also full. This convention avoids a zero-carton final pallet and reconstructs the full shipment without allocating a row for every carton.
How do units and export precision work?
Length and mass units change independently. Converted values retain their exact source until you edit them. Authored values accept up to 6 decimals in mm, 5 in inches, 12 in kg or 4 in pounds. Malformed nonblank fields block the corresponding unit change. CSV uses canonical mm/kg and also includes exact coordinate, height and mass integer records.
What are the supported limits?
The model supports up to 2000 rows per orientation in a pattern family, 2000 cartons per layer, 1000 entered stacking layers and an order of one billion cartons. Length and mass inputs are limited to one million mm or kg respectively. Exceeding a computational limit produces an unsupported result, not a truncated packing plan. No freight rate or confirmed classification is calculated.
Similar Calculators
Storage Unit Layout & Cost Planner
Compare storage unit sizes and quotes with your inventory. Visualize upright item stacks, reserve an aisle, inspect unplaced items and export exact floor plans.
Freight Class Calculator
Calculate freight density by handling unit, compare pallet heights and inspect measurement margins. Includes a conditional 13-band class reference and CSV worksheet.
Plywood Cut Planner
Plan rectangular plywood cuts with kerf and rotation constraints. Compare eight sheet layouts and inspect parts, cuts and remnants.
Unit Converter
Convert between units of length, weight, volume, and area — all in one tool.
