Sod Calculator & Pallet Planner
Turn a measured lawn area or ordered boundary coordinates into a complete sod purchase comparison. Subtract internal garden beds, choose your own cutting allowance, and compare up to six offers with different piece coverage, pallet sizes, loose-piece prices and delivery charges. The planner considers mixed orders and the next full pallet, so a lower total can be identified even when it buys more coverage. Exact area and currency arithmetic preserve whole-piece thresholds; the scaled lawn plan, ledgers and export use the same result. This is an area-based estimate, not a physical roll-cutting layout, turf recommendation, installation schedule or supplier availability check.
Plan the lawn. Price the whole order.
Subtract garden beds, allow for your expected cutting loss, and compare full pallets with loose rolls before ordering.
Measure your lawn
Converts complete dimensions while retaining exact physical quantities until edited.
0–100%, up to six decimals. An assumption you choose; no standard waste rate is supplied.
Lawn boundary and garden beds
Enter x,y pairs in order around each boundary, one pair per line, in m. Use the same origin for the lawn and beds. Straight boundaries only; this is measured surface geometry, with no slope correction. Beds must lie strictly inside without touching or overlapping. Coordinates accept 12 decimals; converted text retains its exact quantity until edited.
Supplier offers · 1
Enter comparable suitable sod products. Prices are USD; there is no exchange-rate conversion. Each offer supplies the whole project, with one fixed delivery charge. Tax, deposits, availability, minimum orders and installation are excluded.
Plan updated. Whole-piece purchasing reflects the current dimensions and offers.
Measured lawn
104 m²
Coverage with allowance
109.2 m²
Lowest entered total
280.00 USD
Your measured lawn plan
| Boundary | Role | Area (m²) |
|---|---|---|
| Lawn outline | Gross lawn | 120 m² |
| Garden bed | Excluded | 16 m² |
Gross 120 m² − excluded 16 m² = retained 104 m². Dimensions and cutting allowance are estimates, not a guaranteed fitting layout.
Complete boundary coordinate ledger
| Boundary | Vertex | x (m) | y (m) |
|---|---|---|---|
| Lawn outline | 1 | 0 m | 0 m |
| Lawn outline | 2 | 12 m | 0 m |
| Lawn outline | 3 | 12 m | 10 m |
| Lawn outline | 4 | 0 m | 10 m |
| Garden bed | 1 | 4 m | 3 m |
| Garden bed | 2 | 8 m | 3 m |
| Garden bed | 3 | 8 m | 7 m |
| Garden bed | 4 | 4 m | 7 m |
Compare complete orders
Lowest entered total: Supplier 1, 11 pallets and 0 loose pieces. Delivery is included. This selection compares quantities and entered prices, not grass suitability or supplier quality.
| Offer | Pallets | Loose pieces | Total pieces | Purchased (m²) | Surplus (m²) | Total USD |
|---|---|---|---|---|---|---|
| Supplier 1 · lowest total | 11 | 0 | 110 | 110 m² | 0.8 m² | 280.00 |
Surplus is purchased coverage above the allowance-adjusted requirement. The model compares all-loose, full pallets plus loose remainder, and the next full pallet. A cheaper extra pallet may create more surplus. It does not place rolls, reuse cutoffs or mix suppliers.
How cutting allowance changes the order
These comparison rates are illustrative, not recommended allowances. All other entered dimensions and prices stay fixed.
| Allowance | Pallets | Loose pieces | Total USD | Lowest-cost offer |
|---|---|---|---|---|
| 0% | 10 | 4 | 267.00 | Supplier 1 |
| 5% | 11 | 0 | 280.00 | Supplier 1 |
| 10% | 11 | 5 | 295.00 | Supplier 1 |
| 15% | 12 | 0 | 305.00 | Supplier 1 |
| 20% | 12 | 5 | 320.00 | Supplier 1 |
Keep the plan and supplier comparison
CSV contains current editing text, retained conversion quantities, exact geometry, every supplier order and all allowance comparisons. Canonical areas use m². Prices are USD, with costs exported as integer cents.
How to use this calculator
- Choose Area method. Enter an already measured lawn area, or expand Lawn boundary and garden beds to enter x,y coordinates in order around the lawn. Exclude paths and other surfaces that will not receive sod.
- For outline mode, use one coordinate origin for all boundaries. Add excluded beds wholly inside the lawn. Boundaries may be concave, but they must not cross, touch or overlap. Coordinates describe a flat measured surface; no slope correction is inferred.
- Set Input units and Entered cutting allowance. Input-unit changes convert complete dimensions while preserving physical quantities; Result area units changes only the result display. Finish incomplete dimensions before converting.
- Expand Supplier offers. Enter Coverage per piece, Pieces per pallet, Price per pallet and Fixed delivery charge. Enable Loose pieces sold only when that supplier sells individual rolls or slabs, then enter their price. All prices are USD.
- Inspect the scaled lawn plan and complete orders. Highlight a boundary, compare excluded areas and read the coordinate ledger. Inspect supplier in the allowance comparison to see how whole-piece purchases change at illustrative allowance rates.
- Download sod plan CSV or Show copyable CSV. Both include exact canonical results, editing text and retained conversion quantities, every supplier order and all allowance comparisons.
The Formula
The mathematical logic powering this calculation is:
Retained lawn area = outer boundary area − sum of internal bed areas
For each simple polygon: area = ½ × absolute value of Σ(xᵢyᵢ₊₁ − xᵢ₊₁yᵢ)
Required coverage = retained area × (1 + entered allowance / 100)
Minimum pieces N = ceil(required coverage / coverage per piece)
For K pieces per pallet, compare:
1. N loose pieces, if loose sales are enabled
2. floor(N/K) pallets plus N mod K loose pieces
3. ceil(N/K) full pallets
Order cost = pallets × pallet price + loose pieces × loose price + fixed delivery
Zero required coverage produces no order and no delivery charge.
Surplus = purchased coverage − required coverage
Within an offer, cost ties prefer fewer purchased pieces, then fewer pallets.
Across offers, cost ties prefer less purchased coverage, then stable ASCII offer ID.
1 ft² = 0.09290304 m² exactly. Geometry and costs keep exact rational areas and integer cents; display rounding does not decide whole-piece quantities.Worked Example
If you input:
- Area method / input units: Boundary coordinates / metres
- Lawn outline: 0,0 → 12,0 → 12,10 → 0,10
- Excluded bed: 4,3 → 8,3 → 8,7 → 4,7
- Entered cutting allowance: 5%
- Supplier offer: 1 m² per piece; 10 pieces per pallet; 25 USD per pallet; 3 USD per loose piece; 5 USD delivery
Result:
The 120 m² outer lawn minus the 16 m² garden bed leaves 104 m². A 5% entered allowance requires 109.2 m², or at least 110 one-square-metre pieces. Eleven full pallets cost 275 USD plus 5 USD delivery, totaling 280 USD. Purchased coverage is 110 m², with 0.8 m² above the allowance-adjusted requirement. This does not guarantee that every cut will fit.
Frequently Asked Questions
How many square feet does a pallet of sod cover?
There is no fixed coverage assumed here. Enter the actual coverage of one piece and the number of pieces on the supplier’s pallet. Their product is that pallet’s stated coverage. Different roll or slab sizes and pallet counts can change both quantities and price comparisons.
Why might the lowest-cost order buy an extra pallet?
When the price of the remaining loose pieces exceeds the price of another pallet, buying the extra pallet can cost less. The comparison evaluates both options and all-loose ordering when available. Surplus is reported separately so that a cheaper total does not conceal extra coverage.
Does the allowance guarantee enough sod for every cut?
No. The allowance is a percentage you enter, not a recommended waste rate. The model compares covered area with purchased area; it does not lay out individual strips, enforce seam placement, reuse offcuts or simulate defects. The shape, roll dimensions, handling and actual installation method affect cutting loss.
Can I enter an irregular lawn and several garden beds?
Yes. Enter ordered straight-edge coordinates for one outer lawn boundary and up to six internal excluded beds in the workspace. Concave boundaries are supported. Beds must be strictly inside, mutually disjoint and not nested. Crossing or touching boundaries pause the result. Curves require an explicitly measured polygon approximation; slopes and terrain are not inferred.
Do unit changes alter my measurements?
Input-unit changes retain the accepted physical quantities even when the displayed conversion is rounded. Editing a converted field replaces that field’s retained quantity. Authored coordinates accept up to 12 decimals in metres or 8 in feet; authored measured area and piece coverage accept up to six decimals. All dimensions, including dormant drafts, must be complete before an input-unit change. Changing Result area units affects presentation only.
What costs and supplier rules are included?
Each offer covers the whole project with one fixed delivery charge, pallet pricing and optional loose-piece pricing. All prices are entered USD. The model does not mix suppliers or include taxes, deposits, installation, minimum charges, inventory restrictions, discounts, split deliveries or product suitability. Use comparable offers and verify the actual terms with the supplier.
What do zero area and exact order thresholds do?
A zero measured area needs no pieces and incurs no delivery charge. Positive area uses an exact ceiling after the allowance is applied. Even a tiny positive excess above a whole piece requires another piece; rounded displayed areas never determine the order. Large costs retain all entered cents. Exact arithmetic does not establish measurement accuracy.
What are the supported limits?
Retained area is at most 100000000 m², allowance 0–100%, piece coverage 0.000001–1000000 m², pieces per pallet 1–100000 and each price or delivery charge 0–1000000 USD with cents. An offer may require at most one billion pieces. The geometry engine supports at most 500 normalized vertices across all rings and coordinates within its stated numerical range. Unsupported inputs are rejected rather than rounded into an order.
Similar Calculators
Plant Spacing & Layout Calculator
Plot rectangular, staggered or triangular plant spacing around paths. Compare exact planting counts, whole-tray orders and costs, with a scaled map and coordinate CSV.
Polygon Area Calculator
Calculate polygon area from ordered coordinates, subtract cutouts, and inspect perimeter, centroid and point location on a consistently scaled plan.
Lawn Fertilizer Calculator
Calculate fertilizer product needed from lawn area, nitrogen target, N-P-K analysis, and bag coverage.
Gravel & Crushed Stone Calculator
Estimate gravel and crushed stone for multiple sections. Compare bulk tons or yards with whole bags, including density, compaction, allowance and cost.
Fence Calculator
Plan fence panels, shared corner posts and gate openings. Compare layouts with a scaled plan, opening schedule, spare panels and material costs.
Mowing Time & Seasonal Cost Planner
Compare lawn mowing time, seasonal costs and profit across mower alternatives. Include property access, recurring visits, trimming, travel and fixed costs.
