Gravel & Crushed Stone Calculator

Estimate gravel volume, mass and cost for rectangular or circular areas. Compare bulk delivery with bags, inspect scaled diagrams, and adjust your supplier's density, compaction ratio and extra material allowance.

Material planner

Plan your gravel order

Try a project

Illustrative density, depth and prices; not material specifications.

Converts dimensions and density. Purchase units stay as quoted.

Sections to fill

One aggregate product. Enter non-overlapping rectangular or circular sections.

Section 1

Material assumptions

Use your supplier's loose bulk density. Example values are not universal gravel specifications.

Bulk density includes spaces between particles. Use the supplied loose condition, including its moisture assumptions, rather than solid-rock density.

Added once after converting to loose volume. This is separate from compaction and purchase rounding.

Bulk quote

Choose the actual supplier unit. A US short ton is 2,000 lb; a metric tonne is 1,000 kg.

Changing this unit reinterprets the entered quote and increment; it does not convert them. Enter the matching supplier price.

Bagged material quote

Compare the same product in whole bags. Enter either labeled mass or labeled volume.

Changing this unit reinterprets the amount per bag; it does not convert the number. Enter the size and price shown on the package.

Delivery assumptions (optional)

Section quantities

Geometric volume uses the entered depth. Compaction and allowance are applied once to the combined volume.

Dimensions and geometric volumes of all sections
SectionShapeLength / diameter (m)Width (m)Depth (cm)Volume (m³)
1rectangle4350.6

What if the depth changes?

Changes every section's depth by the same percentage, keeping other assumptions fixed. These are quantity comparisons, not recommended construction depths.

Required quantity and purchase costs at three depth scenarios
Depth scenarioLoose requiredMass requiredBulk total (USD)BagsBag total (USD)
25% shallower0.495 m³0.792 metric tonnes$48.0032$192.00
Entered depths0.66 m³1.056 metric tonnes$66.0043$258.00
25% deeper0.825 m³1.32 metric tonnes$84.0053$318.00

Method, sources and limits

Rectangle volume is length × width × depth; circle volume is π × (diameter ÷ 2)² × depth. For compacted geometry, multiply by the supplied loose/compacted volume ratio. Add the extra allowance once, then multiply loose volume by loose bulk density to obtain mass. Bulk orders round to your optional quote increment; bags round to whole packages. Costs use the actual purchased quantity. No universal density or compaction factor is assumed to be correct for your site.

NIST's conversion factors provide the international foot and pound conversions. A US short ton is 2,000 lb and a metric tonne is 1,000 kg. The public ASTM C29/C29M scope distinguishes loose and compacted bulk density and explains why moisture and handling conditions matter. This calculator is not an implementation of that laboratory test. Vulcan's material planning guidance recommends confirming quantities for project conditions with the supplier.

Scope: one product, up to 20 non-overlapping sections, lengths 0.01–1,000 m, depths 0.001–5 m, total geometric volume up to 100,000 m³, and loose density 100–3,000 kg/m³. A compacted-volume ratio must be 1–2; this range is a model limit, not installation guidance. Sloped beds need an appropriate measured average depth. Pipe displacement, structural design, drainage performance, taxes, installation and equipment are excluded. Carrier capacity must satisfy both actual weight and volume constraints even when this estimate uses only one.

How to use this calculator

  1. Choose metric or imperial measurements. Add non-overlapping rectangular or circular sections, entering their dimensions and depth for one aggregate product.
  2. Choose whether the entered depth describes loose fill or finished compacted material. For compacted depth, enter the supplier's loose-volume-to-compacted-volume ratio.
  3. Enter loose bulk density and a separate extra-material allowance. Replace illustrative values with information for the actual product and its supplied condition.
  4. Enter the bulk quote unit and price, optional supplier order increment, and the bag's labeled mass or volume and price. Keep US short tons, metric tonnes and cubic yards distinct.
  5. Optionally include a delivery capacity and fee. Review required material, rounded purchases, excess quantity, total costs and the scaled section and depth diagrams.
  6. Compare shallower and deeper scenarios, then download the CSV. Verify your supplier's product, units and delivery constraints before ordering.

The Formula

The mathematical logic powering this calculation is:

Rectangle volume = length × width × depth.
Circle volume = π × (diameter ÷ 2)² × depth.
Loose volume = total geometric volume × supplied loose/compacted volume ratio; use ratio 1 for loose-fill geometry.
Required loose volume = loose volume × (1 + extra allowance ÷ 100).
Required mass = required loose volume × loose bulk density.
Bulk purchase = required quantity, or ceiling(required quantity ÷ supplier increment) × supplier increment.
Whole bags = ceiling(required mass ÷ labeled bag mass), or ceiling(required loose volume ÷ labeled bag volume).
Material cost uses the purchased quantity. Optional delivery loads = ceiling(purchased material ÷ selected load capacity); delivery cost = loads × fee per load.

Worked Example

If you input:

  • Measurement units: Metric
  • Section 1 shape / length / width / depth: Rectangle / 4 m / 3 m / 5 cm
  • Depth describes: Loose fill
  • Loose bulk density: 1600 kg/m³, illustrative
  • Extra material allowance: 10%
  • Bulk quote: 60 USD per metric tonne
  • Supplier order increment: 0.1 metric tonne
  • Bag amount / price: 25 kg / 6 USD
  • Delivery: Not included

Result:

The section measures 4 × 3 × 0.05 = 0.60 m³. With 10% extra, the requirement is 0.66 m³, or 1056 kg at the entered loose density. Bulk ordering rounds 1.056 tonnes to 1.1 tonnes, costing $66 and leaving 44 kg extra beyond the allowance-adjusted requirement. Bagged supply requires ceiling(1056 ÷ 25) = 43 bags, costing $258 and supplying 1075 kg, with 19 kg extra. Delivery, tax and installation are excluded.

Frequently Asked Questions

Which density should I use for gravel or crushed stone?

Use your supplier's loose bulk density for the actual aggregate and moisture condition. Bulk density includes spaces between particles and differs from solid-rock density. The editable examples are illustrative assumptions, not universal values for gravel, limestone, river rock or every quarry product. If you only know a compacted density, obtain a matching loose density before using the compaction-ratio method here.

How does the compaction ratio work?

The ratio is loose volume required divided by finished compacted volume. A ratio of 1.2 means 1.2 cubic metres of loose material for one cubic metre of the finished layer. It applies only when the entered geometry describes compacted material; loose-fill mode uses one. The accepted ratio range is a model limit, not a recommendation. Confirm your product's ratio and avoid adding the same compaction allowance again elsewhere.

Are a ton, a tonne and a cubic yard interchangeable?

No. A US short ton is 2000 pounds and a metric tonne is 1000 kilograms; both measure mass. A cubic yard measures volume. The calculator converts between mass and loose volume using the entered density, then prices the order in the explicitly selected quote unit. Choosing a different quote unit reinterprets the entered price and increment, so update them to match the supplier's quote.

Why can bulk material and bags have different excess quantities?

A supplier may require bulk orders in fixed increments, while bags must be bought as whole packages. The calculator sums the project's requirement first, then rounds once for each purchase option. Costs use the rounded quantity, and excess is shown separately from the extra-material allowance. A bag labeled by weight is not treated as a fixed volume without the entered density.

Does the calculator recommend a driveway or drainage depth?

No. Enter the specified depth for your project. The 25% shallower and deeper scenarios demonstrate quantity and cost changes, not construction suitability. Soil, loads, grading, drainage, aggregate type and installation requirements are outside the model. Pipe displacement and specialized French-drain, walling-stone or aquarium layouts are not modeled.

What do the diagrams show?

The selected section's plan view preserves its length-to-width proportions, or draws its circular diameter. Very narrow sections can appear as a line. Depth bars compare the specified depth with equivalent loose-material and allowance-adjusted depths over the same footprint. Those bars explain purchasing volume; they do not mean the extra allowance should be installed as an additional layer. Tables contain the underlying quantities.

How are delivery loads and costs estimated?

If enabled, the calculator divides each option's purchased material by your selected capacity and rounds up to a minimum number of loads. It does not increase the order to full truckloads. The same capacity and per-load fee are applied to both options. This checks only the selected mass or volume constraint; the carrier must confirm both physical limits, access, packaging and any minimum charges. Tax, installation and equipment remain excluded.

What happens when I change measurement units or download the CSV?

Metric/imperial switching converts dimensions and loose density so the physical project stays the same. Supplier quote units, bag units, entered prices and delivery units remain as explicitly selected. The CSV records assumptions, every section, required quantities and both purchase options, with canonical geometry in metres, volume in cubic metres and mass in kilograms. Blank required inputs prevent a misleading estimate.

Similar Calculators