Mowing Time & Seasonal Cost Planner
Price a mowing season from the work you actually expect to do. Enter properties with mowable areas, usable access widths, visit counts, trimming and travel/setup time, service prices and consumables. Compare mower alternatives using distinct cutting and overall operating widths, assumed ground speed, efficiency, hourly operating cost and committed seasonal costs. See the lowest complete-plan cost and the fewest operator hours, inspect signed profit and cost breakdowns, and export exact property ledgers. A wider or faster mower can still be more expensive over the entered season, or unable to access a property. Rates and examples are illustrative user inputs, not local market prices or equipment recommendations. The model covers one sequential operator and does not optimize a travel route, calendar or crew assignment.
Price the season. See where the hours go.
Compare mower alternatives across your properties, including access limits, recurring visits, non-mowing work and committed costs.
40 property visits. Lowest seasonal cost: Illustrative 48-inch alternative. Selected seasonal cost USD 1,083.13.
Edit properties, visits and mower alternatives
Compare one operator using one mower alternative across all listed properties. Enter your measured areas, realistic operating rates and costs. This does not optimize travel routes, assign crews, forecast weather or determine equipment suitability or safe operating speeds.
Properties and recurring visits
Visits are counted separately for each property. Travel/setup is the time you assign to that property per visit, not a route calculated from addresses. Do not count the same shared journey twice.
Mower alternatives
Each alternative must serve every property with positive area and visits. If its overall width exceeds any usable access width, the complete plan is marked blocked; inaccessible work is never silently dropped.
Except area, decimal inputs accept up to six places. Required blanks remain invalid; enter zero explicitly where intended. Mower operating cost covers mowing only; labor covers all entered time. A zero-area visit can still incur trimming, travel/setup and consumables.
Which alternative fits the season?
40 property visits · entered seasonal revenue USD 1,700. Lowest complete-plan cost: Illustrative 48-inch alternative. Least operator hours: Illustrative 60-inch alternative. Exact ties are retained.
Actual modeled margin: 36.29%. Cost per property visit: USD 27.08. Capacity: 63,360 square feet per mowing hour.
One sequential operator; no route or calendar optimization. Cutting width determines capacity, while overall operating width is checked against entered access. Equality is not a clearance or equipment-suitability guarantee.
What drives seasonal cost?
Common scale: 0 to USD 1,209.38. Segments follow the listed order: solid blue labor, purple outline mower operation, dashed amber consumables, grey outline fixed costs. Exact amounts remain in the ledger and CSV.
Illustrative 48-inch alternativeUSD 1,083.13
- Labor: USD 759.38
- Mower operation: USD 123.75
- Consumables: USD 0
- Committed seasonal costs: USD 200
Illustrative 60-inch alternativeUSD 1,209.38
- Labor: USD 635.63
- Mower operation: USD 123.75
- Consumables: USD 0
- Committed seasonal costs: USD 450
Profit or loss at your entered prices
Common signed scale: USD 0 to USD 616.88. Dashed marker is zero; losses extend left. This includes only the costs you entered.
Illustrative 48-inch alternativeUSD 616.88
Illustrative 60-inch alternativeUSD 490.63
Where do the operator hours go?
Illustrative 48-inch alternative · common scale 0 to 15.2083 h per property over the season. Solid blue is mowing, purple outline is trimming, dashed amber is travel/setup. Each property uses its own visit count.
Illustrative half-acre lawn15.2083 h
- Mowing: 6.875 h
- Trimming: 3.3333 h
- Travel and setup: 5 h
Illustrative quarter-acre lawn10.1042 h
- Mowing: 3.4375 h
- Trimming: 1.6667 h
- Travel and setup: 5 h
Alternative comparison ledger
| Alternative | Status | Hours | Seasonal cost | Revenue | Profit / loss | Target revenue |
|---|---|---|---|---|---|---|
| Illustrative 48-inch alternative | Complete plan | 25.3125 h | USD 1,083.13 | USD 1,700 | USD 616.88 | USD 1,353.91 |
| Illustrative 60-inch alternative | Complete plan | 21.1875 h | USD 1,209.38 | USD 1,700 | USD 490.63 | USD 1,511.72 |
Exact property ledger
Selected alternative: Illustrative 48-inch alternative. Committed seasonal cost USD 200 is added once after summing variable property costs; it is not allocated arbitrarily to properties.
| Property | Mowable area | Visits | Mow hours/visit | All hours/visit | Season hours | Season labor | Season mower | Season consumables | Season variable cost | Season revenue |
|---|---|---|---|---|---|---|---|---|---|---|
| Illustrative half-acre lawn | 21780 | 20 | 11/32 | 73/96 | 365/24 | 1825/4 | 165/2 | 0 | 2155/4 | 1000 |
| Illustrative quarter-acre lawn | 10890 | 20 | 11/64 | 97/192 | 485/48 | 2425/8 | 165/4 | 0 | 2755/8 | 700 |
Save the seasonal plan
Export property assumptions, access exclusions, exact workload and cost ledgers, margins and alternative comparisons. Blocked alternatives remain explicitly unavailable. No quote is sent.
How to use this calculator
- Load Seasonal cost example or Restricted access example, then open Edit properties, visits and mower alternatives. Enter the currency, loaded operator cost and target margin on revenue.
- Add each property with its net mowable area and area unit. Enter usable access width after your own clearance allowance, whole seasonal visit count, per-visit trimming and travel/setup time, service price and consumables.
- Add mower alternatives with cutting width and separate overall operating width. Enter realistic assumed speed and efficiency, hourly mower operating cost and committed seasonal costs without double-counting costs.
- Compare the lowest-cost and least-hours alternatives. Inspect access exclusions, seasonal cost and profit charts, and the selected alternative’s property time breakdown and exact ledger.
- Download the mowing plan CSV or show its selectable text. Confirm dimensions, productivity and cost assumptions against your actual work; this worksheet does not determine safe operation or send a quote.
The Formula
The mathematical logic powering this calculation is:
Effective mowing capacity in square feet per hour = (cutting width in inches / 12) × speed in mph × 5280 × efficiency / 100. Equivalent acreage capacity = width in inches × speed in mph × efficiency / 9900. Width, speed and field efficiency follow the field-capacity method described by Iowa State University Extension; Exmark publishes a mowing-specific productivity chart. We use exact physical conversions and the entered efficiency percentage, not a rounded manufacturer divisor. Efficiency includes mowing turns, overlap and mowing delays. Separate trimming and travel/setup inputs represent non-mowing work. Example efficiencies and speeds are assumptions, not measured equipment performance or safe operating limits.
Normalize each mowable area to square feet: 1 acre = 43560 square feet; 1 square metre = 1562500/145161 square feet, from the exact international foot of 0.3048 metres. Exact fractions preserve area when units change. For each property, mowing hours per visit = area / capacity. Operator hours per visit = mowing hours + trimming minutes / 60 + travel/setup minutes / 60. Mower operating cost applies only to mowing hours; loaded labor cost applies to all entered operator hours. Variable cost per visit = operator hours × labor hourly rate + mowing hours × mower hourly rate + consumables per visit.
For each property, multiply workload, variable cost and entered service price by its own whole seasonal visit count. Sum the property lines. Seasonal cost = seasonal variable cost + committed seasonal fixed cost, charged once even when visits are zero. Profit = entered seasonal revenue − seasonal cost. Target revenue = seasonal cost / (1 − target margin / 100). Actual margin = profit / revenue × 100, unavailable when revenue is zero. Average cost per property visit is unavailable when total visits are zero. Fixed costs are not allocated arbitrarily among properties.
Access is checked using overall operating width, not cutting width. If any property has positive area and visits, and machine width exceeds its supplied usable access width, that alternative is blocked for the complete plan. Its totals and numeric ranking are unavailable; inaccessible work is never silently dropped. Width equality is accepted algebraically but is not a physical clearance guarantee. Overall width must be at least cutting width. Zero-area or zero-visit properties do not block mower access; zero-area visits can still incur entered non-mowing time and consumables. Return all exact tied lowest-cost and least-hours feasible alternatives.
Supports 1–20 properties and 1–6 mower alternatives. Area is nonnegative, up to one billion square feet equivalent, with up to 12 decimal places or integer fractions up to 24 digits per part. Widths are positive and at most 240 inches; speed is positive and at most 30 mph; efficiency is greater than zero and at most 100%. These are mathematical input limits, not equipment or safety recommendations. Visits are whole numbers from 0–366. Trimming and travel/setup each allow 0–1440 minutes per visit. Hourly costs, prices and consumables allow 0–1000000; seasonal fixed cost allows 0–1000000000; target margin is 0–95%. Non-area decimal inputs allow six places. One currency label does not convert money. No tax, depreciation rules, financing, slope suitability, weather forecast, route optimization or crew scheduling is inferred.Worked Example
If you input:
- Properties: 0.5-acre and 0.25-acre lawns; 20 visits each; usable access 72 inches
- Time: Trimming 10 and 5 minutes per visit; travel/setup 15 minutes per property visit
- Prices: USD 50 and USD 35 per visit; zero consumables; labor USD 30/hour
- Compact alternative: 48-inch cut; 52-inch overall width; 4 mph; 75% efficiency; USD 12/mowing hour; USD 200 seasonal fixed cost
- Wide alternative: 60-inch cut; 64-inch overall width; 5 mph; 80% efficiency; USD 20/mowing hour; USD 450 seasonal fixed cost
- Target: 20% margin on modeled costs
Result:
There are 40 property visits and USD 1700 seasonal revenue. The compact alternative covers 63360 square feet per mowing hour and uses 10.3125 mowing hours plus 15 non-mowing hours, totaling 25.3125 operator hours. Its seasonal labor cost is USD 759.375, mower operation is USD 123.75 and fixed cost is USD 200: total USD 1083.125 (displayed USD 1083.13). Profit is USD 616.875 and target revenue for 20% margin is USD 1353.90625. The wide alternative covers 105600 square feet per mowing hour and uses 21.1875 operator hours, but costs USD 1209.375 because of its higher fixed cost. The compact alternative is cheaper; the wide alternative is faster. In the restricted-access example, the second property’s 60-inch usable width blocks the 64-inch-wide alternative while the compact one remains feasible.
Frequently Asked Questions
How is mowing time estimated from deck width and speed?
The planner calculates swept area per hour from cutting width, ground speed and the entered efficiency. Mowing time is area divided by that effective capacity. Efficiency reduces theoretical coverage for mowing turns, overlap and delays; trimming and travel/setup are additional operator time.
Why can the faster mower cost more over the season?
Lower mowing hours can be outweighed by higher operating or committed seasonal costs. In the default example the wider alternative uses fewer operator hours, but its higher fixed cost makes its seasonal total higher. Compare costs over the visit counts you actually expect.
Why are cutting width and overall width separate inputs?
Cutting width determines mowing capacity. Overall operating width is used for the simplified access comparison. Chutes, attachments and maneuvering needs can make physical access more demanding. Enter a usable access width after your own clearance allowance and verify actual fit separately.
What happens when a mower cannot access one property?
That alternative is blocked for the complete plan if the property has positive area and visits. It has no aggregate cost or time recommendation, and inaccessible work is not priced as zero. The exclusion remains visible in the dashboard and CSV.
Does efficiency already include trimming and travel?
No. Here efficiency applies to mowing capacity, including mowing turns, overlap and mowing delays. Enter trimming, cleanup or other non-mowing work separately, and assign travel/setup minutes to each property per visit. Do not count a shared journey or mowing delay twice.
Why do fixed costs remain when visits are zero?
The seasonal fixed-cost input represents a committed amount for the entered season. It is charged once even without operating work. If the cost is actually avoided, change that assumption explicitly. Revenue, mowing time and per-visit costs are multiplied by the visit count.
Is target margin the same as adding a markup?
No. Target revenue divides cost by one minus the margin fraction. At a 20% target margin, a cost of 100 requires revenue of 125, rather than 120. This margin covers only the costs you included; no missing overhead or tax is inferred.
Can I use this to schedule a crew or choose a safe mowing speed?
No. It models one operator working sequentially with supplied time and equipment assumptions. It does not optimize routes, assign multiple workers, forecast weather, assess slopes or recommend safe speeds. Its numeric limits are calculation bounds only.
Similar Calculators
Sod Calculator & Pallet Planner
Measure lawn outlines and garden-bed cutouts, compare sod pallets and loose rolls, and explore cutting allowances with a scaled plan, supplier costs and CSV export.
Lawn Fertilizer Calculator
Calculate fertilizer product needed from lawn area, nitrogen target, N-P-K analysis, and bag coverage.
Cleaning Workload & Staffing Planner
Calculate cleaning task times, weekday staffing gaps and contract costs. Compare paid shifts, visualize workload and export a complete cleaning cost ledger.
