Rebar Calculator

Turn your entered reinforcement layout into a traceable material plan. Compare supplier stock lengths and prices, select a bar to see its cut allocation, and keep the full demand and stock ledgers.

Rebar layout & stock planner

Trace every bar from plan to purchase.

Enter your designed layout, compare whole-stock purchases, and inspect each cut. Example dimensions and prices are illustrative.

Mat dimensions

Enter dimensions from your design. Offsets describe centerlines; they do not establish clear concrete cover or structural suitability.

Positive, up to 100000 mm. Decimals or fractions. Unit changes preserve exact length; finish this entry before changing units.

Positive, up to 100000 mm. Decimals or fractions. Unit changes preserve exact length; finish this entry before changing units.

1–100; at most 512 pieces in total.

Lengthwise bars

Use exactly the same identifier only for interchangeable bars.

Measured from the first transverse edge. Decimals or fractions. Unit changes preserve exact length; finish this entry before changing units.

Measured from the opposite transverse edge. Decimals or fractions. Unit changes preserve exact length; finish this entry before changing units.

Both extreme positions are included; intermediate spacing is equalized. Decimals or fractions. Unit changes preserve exact length; finish this entry before changing units.

Deduction along the bar, not its transverse position. Decimals or fractions. Unit changes preserve exact length; finish this entry before changing units.

Decimals or fractions. Unit changes preserve exact length; finish this entry before changing units.

Crosswise bars

Use exactly the same identifier only for interchangeable bars.

Measured from the first transverse edge. Decimals or fractions. Unit changes preserve exact length; finish this entry before changing units.

Measured from the opposite transverse edge. Decimals or fractions. Unit changes preserve exact length; finish this entry before changing units.

Both extreme positions are included; intermediate spacing is equalized. Decimals or fractions. Unit changes preserve exact length; finish this entry before changing units.

Deduction along the bar, not its transverse position. Decimals or fractions. Unit changes preserve exact length; finish this entry before changing units.

Decimals or fractions. Unit changes preserve exact length; finish this entry before changing units.

Compare supplier offers

Each offer is a separate purchase plan with unlimited stock availability. Enter all prices in the same currency. Material identifiers must match the bar directions.

Offer 1

Zero for a no-loss model; a piece ending exactly at the stock endpoint needs no final cut. Decimals or fractions. Unit changes preserve exact length; finish this entry before changing units.

Stock option 1

Decimals or fractions. Unit changes preserve exact length; finish this entry before changing units.

Offer 2

Zero for a no-loss model; a piece ending exactly at the stock endpoint needs no final cut. Decimals or fractions. Unit changes preserve exact length; finish this entry before changing units.

Stock option 1

Decimals or fractions. Unit changes preserve exact length; finish this entry before changing units.

52 pieces required across 1 mats. 2 offers have complete cutting plans.

Your purchase options

52 required pieces · 21 lengthwise and 31 crosswise per mat. Costs use your entered currency.

From layout to stock bar

Solid lines run lengthwise; dashed lines run crosswise. The selected bar is thicker. This plan view shows centerlines, not bar diameter or layer depth.

Mat 16,000 × 4,000 mm
Rebar centerline layout, mat 121 lengthwise and 31 crosswise bars. Selected 1-x-1, position 50 mm, cut length 5900.000000 mm. Exact data is available in the bar selector and demand table.
Centerline from edge
50 mm
Cut length
5,900 mm
Material
Entered bar A

6 m stock: selected stock

Stock bar 1 · 6,000 mm · cut 1 of 1

Purple: selected piece. Blue: other cuts. Amber: cutting loss. Pale: remaining stock. Narrow cuts may be too small to see; exact amounts are listed below.

Cutting loss: 3 mm · Remaining: 97 mm

Complete demand ledger (52 pieces)
Select barMatDirectionMaterialPosition (mm)Cut length (mm)
1LengthwiseEntered bar A505,900
1LengthwiseEntered bar A2455,900
1LengthwiseEntered bar A4405,900
1LengthwiseEntered bar A6355,900
1LengthwiseEntered bar A8305,900
1LengthwiseEntered bar A1,0255,900
1LengthwiseEntered bar A1,2205,900
1LengthwiseEntered bar A1,4155,900
1LengthwiseEntered bar A1,6105,900
1LengthwiseEntered bar A1,8055,900
1LengthwiseEntered bar A2,0005,900
1LengthwiseEntered bar A2,1955,900
1LengthwiseEntered bar A2,3905,900
1LengthwiseEntered bar A2,5855,900
1LengthwiseEntered bar A2,7805,900
1LengthwiseEntered bar A2,9755,900
1LengthwiseEntered bar A3,1705,900
1LengthwiseEntered bar A3,3655,900
1LengthwiseEntered bar A3,5605,900
1LengthwiseEntered bar A3,7555,900
1LengthwiseEntered bar A3,9505,900
1CrosswiseEntered bar A503,900
1CrosswiseEntered bar A246.66673,900
1CrosswiseEntered bar A443.33333,900
1CrosswiseEntered bar A6403,900
1CrosswiseEntered bar A836.66673,900
1CrosswiseEntered bar A1,033.3333,900
1CrosswiseEntered bar A1,2303,900
1CrosswiseEntered bar A1,426.6673,900
1CrosswiseEntered bar A1,623.3333,900
1CrosswiseEntered bar A1,8203,900
1CrosswiseEntered bar A2,016.6673,900
1CrosswiseEntered bar A2,213.3333,900
1CrosswiseEntered bar A2,4103,900
1CrosswiseEntered bar A2,606.6673,900
1CrosswiseEntered bar A2,803.3333,900
1CrosswiseEntered bar A3,0003,900
1CrosswiseEntered bar A3,196.6673,900
1CrosswiseEntered bar A3,393.3333,900
1CrosswiseEntered bar A3,5903,900
1CrosswiseEntered bar A3,786.6673,900
1CrosswiseEntered bar A3,983.3333,900
1CrosswiseEntered bar A4,1803,900
1CrosswiseEntered bar A4,376.6673,900
1CrosswiseEntered bar A4,573.3333,900
1CrosswiseEntered bar A4,7703,900
1CrosswiseEntered bar A4,966.6673,900
1CrosswiseEntered bar A5,163.3333,900
1CrosswiseEntered bar A5,3603,900
1CrosswiseEntered bar A5,556.6673,900
1CrosswiseEntered bar A5,753.3333,900
1CrosswiseEntered bar A5,9503,900
Complete stock ledger (52 bars)
Stock barStock optionPieces in cut orderPiece total (mm)Cutting loss (mm)Remaining (mm)
111-x-15,900397
211-x-25,900397
311-x-35,900397
411-x-45,900397
511-x-55,900397
611-x-65,900397
711-x-75,900397
811-x-85,900397
911-x-95,900397
1011-x-105,900397
1111-x-115,900397
1211-x-125,900397
1311-x-135,900397
1411-x-145,900397
1511-x-155,900397
1611-x-165,900397
1711-x-175,900397
1811-x-185,900397
1911-x-195,900397
2011-x-205,900397
2111-x-215,900397
2211-y-13,90032,097
2311-y-23,90032,097
2411-y-33,90032,097
2511-y-43,90032,097
2611-y-53,90032,097
2711-y-63,90032,097
2811-y-73,90032,097
2911-y-83,90032,097
3011-y-93,90032,097
3111-y-103,90032,097
3211-y-113,90032,097
3311-y-123,90032,097
3411-y-133,90032,097
3511-y-143,90032,097
3611-y-153,90032,097
3711-y-163,90032,097
3811-y-173,90032,097
3911-y-183,90032,097
4011-y-193,90032,097
4111-y-203,90032,097
4211-y-213,90032,097
4311-y-223,90032,097
4411-y-233,90032,097
4511-y-243,90032,097
4611-y-253,90032,097
4711-y-263,90032,097
4811-y-273,90032,097
4911-y-283,90032,097
5011-y-293,90032,097
5111-y-303,90032,097
5211-y-313,90032,097

Keep the complete plan

Includes entered dimensions, material identifiers, all supplier outcomes and exact cut allocations. Display values use up to seven significant digits; the CSV retains exact values. Confirm the entered design and fabrication details before ordering.

How to use this calculator

  1. Enter mat width, length and identical-mat count. Each length field accepts millimetres, metres, inches or feet; exact fractions are retained when needed during unit changes.
  2. For each direction, enter the two transverse centerline offsets, maximum spacing and longitudinal end deductions from your design. Centerline offsets are not clear surface cover.
  3. Assign matching material identifiers only to interchangeable bars. Add each supplier offer with its own stock lengths, prices and loss per separating cut. Use the same currency throughout.
  4. Compare the complete purchase plans and their search status. Select a bar to link its position in the mat with its physical stock allocation and cut order.
  5. Review demand and stock ledgers. Resolve invalid inputs or pieces that cannot fit compatible stock. Download the complete CSV or select its copyable version.

The Formula

The mathematical logic powering this calculation is:

For each direction, transverse span S = mat width − first centerline offset − last centerline offset. If S = 0 there is one bar. Otherwise intervals = ceiling(S / maximum spacing), count = intervals + 1, and actual spacing = S / intervals. Both extreme centerlines are included. Swap mat dimensions for the perpendicular direction. Cut length = longitudinal dimension − start deduction − finish deduction. Multiply demand by the entered identical-mat count.
A physical stock bar containing n pieces consumes n−1 kerfs only when the pieces plus those kerfs exactly reach its endpoint. Otherwise n kerfs must fit. Stock length = piece lengths + cutting loss + remaining material. Materials must match exactly; no splice is inferred.
Supplier offers are evaluated separately. The search minimizes whole-stock purchase cost, then purchased length, then stock count. Several feasible starting plans precede a deterministic branch-and-bound search limited to 20000 visited nodes. A completed search can prove the optimum for this model; a limited search reports only a feasible incumbent. Prices are entered in one currency, without tax, delivery, labor or residual resale credit.
Supported scope: one rectangular mat, two straight-bar directions, 1–100 identical mats, up to 512 pieces total, three offers and six stock types per offer. Stock supply is unlimited. Length conversions preserve exact rational quantities on a 0.000001 mm grid. Dimensions are bounded to 100000 mm. This is a geometric takeoff of an entered design, not structural design or code-compliance verification.

Worked Example

If you input:

  • Mat: 4000 × 6000 mm; one mat
  • Both directions: 50 mm extreme centerline offsets and end deductions; 200 mm maximum spacing
  • Material: One entered compatible material
  • Offers: 6000 mm stock at 20; 12000 mm stock at 38; 3 mm loss per cut

Result:

The lengthwise family has 21 pieces at 5900 mm, spaced 195 mm apart. The crosswise family has 31 pieces at 3900 mm, spaced 196⅔ mm apart. The 6000 mm offer uses 52 stock bars and costs 1040. A feasible 12000 mm plan uses 21 bars and costs 798: ten pairs of long pieces, ten triples of short pieces and one mixed pair. The price difference is 242 in the entered currency. These illustrative dimensions do not recommend a reinforcement design; consult each offer’s displayed search status before treating its result as optimal.

Frequently Asked Questions

Does this choose safe rebar size or spacing?

No. Enter the design you have been given. The tool does not calculate loads, strength, slab thickness, clear cover, anchorage, lap lengths or structural suitability. It models straight-bar positions and material purchases only.

Why is actual spacing smaller than my maximum?

The model includes both extreme centerlines and divides the distance between them into the smallest whole number of equal intervals that does not exceed your entered maximum. This is an explicit placement convention, not a universal construction rule.

Can I use the same stock for both directions?

Yes, when both directions and the stock row have exactly the same material identifier. Different identifiers keep their cuts separate. The identifier is your assertion of compatibility; the tool does not verify diameter, grade or coating.

Are leftover lengths and cutting losses the same?

No. Cutting loss is material consumed by the entered kerf. Remaining stock is the untouched tail after the modeled cuts. The ledger separates both, and no resale or reuse credit is applied to the purchase cost.

What if a bar is longer than every stock option?

The offer is infeasible for the complete demand. The tool identifies pieces that cannot fit; it does not invent a lap or splice, and it does not allocate the remaining pieces as a partial purchase.

Is the cheapest displayed plan guaranteed optimal?

Only a completed search is labeled optimal, and only within this entered straight-bar model and its unlimited stock supply. A search stopped at its node limit retains a feasible plan and explicitly says that an optimum was not proved.

Can the plan include openings, bends or multiple layers?

Openings, hooks, bent bars and varying layers are outside this model. Identical-mat count repeats the same geometry and materials; it does not design layer elevations or supports. Keep fabrication details in the project drawings.

Similar Calculators