Concrete Slab Calculator
The Concrete Slab Calculator estimates how much concrete is needed for patios, pads, sidewalks, shed foundations, and rectangular slabs. It converts length, width, and thickness into cubic feet and cubic yards, then adds a waste factor for over-excavation, uneven subgrade, and ordering margin. The calculator also estimates ready-mix cost or bag count so you can plan a pour or shopping list more confidently.
Concrete Slab Calculator Interactive Tool
Adjust the assumptions below and review the live results locally in your browser.
Results
Slab dimensions
Measure the formed slab area and planned thickness.
Ordering assumptions
Waste, ready-mix pricing, and bag yield for material planning.
Results
How to use this calculator
- Enter the slab length and width using feet as the unit.
- Enter the slab thickness in inches, such as four inches for many light-duty slabs.
- Add a waste percentage to cover uneven grade, forms, and ordering margin.
- Enter a ready-mix price per cubic yard and bag yield if you want cost and bag estimates.
- Review cubic yards, cubic feet, estimated bag count, and total concrete cost before ordering materials.
The Formula
The mathematical logic powering this calculation is:
Volume in cubic feet = length × width × thickness in feet
Cubic yards = cubic feet ÷ 27
Order volume = cubic yards × (1 + waste percentage)
Bag count = order cubic feet ÷ bag yield cubic feetWorked Example
If you input:
- Length: 20
- Width: 12
- Thickness: 4
- Waste Allowance: 10
- Ready-Mix Price: 160
Result:
A 20 by 12 foot slab at four inches thick requires just under three cubic yards before waste and a larger order volume after adding a 10% allowance.
Frequently Asked Questions
Why add a concrete waste factor?
Real excavations are rarely perfect. A waste factor helps cover uneven subgrade, small measurement errors, spillage, and the risk of running short.
Should I round up concrete orders?
Usually yes. Ready-mix suppliers and bag purchases often require practical rounding, and running short during a pour can be expensive.
Does this calculator include reinforcement?
No. Rebar, mesh, vapor barriers, base gravel, and forms should be estimated separately based on project requirements.
Can I use this for footings?
It is best for rectangular slabs. Footings can be estimated if they are rectangular, but complex shapes should be broken into sections.
Is four inches always enough thickness?
No. Thickness depends on use, soil, reinforcement, local codes, and loads. Ask a qualified professional for structural slabs or vehicle loads.
Similar Calculators
Asphalt Calculator
Estimate how much asphalt you need in tons, cubic yards, and pounds for a paving job.
Paint Coverage Calculator
Estimate paintable wall area, paint needed, gallons to buy, and project cost with room-by-room deductions.
Square Meters to Square Feet Calculator
Convert square meters to square feet instantly with a clean, one-field converter.
Driveway Cost & Material Planner
Compare driveway costs from measured areas, pavement layers, excavation and supplier quotes. Plan material orders, truck loads, missing prices and budget headroom.
Foundation Repair Quote & Depth Planner
Compare foundation repair quotes across supplied pier depths. Audit included-depth allowances, per-pier billing increments, fixed scope and missing prices.
