Patchwork Quilt Top & Fabric Planner
Turn a grid of square blocks into a quilt-top design and fabric cutting plan. Paint individual cells or apply patterns, choose sashing and border fabrics, and compare the permitted cutting orientations for each group. A proportional layout connects your finished design to per-fabric purchases, a shelf-by-shelf cut inspector and a complete export. This plans the top; use the separate backing and binding calculator to finish a measured quilt.
Design the top. Know every cut.
Arrange your fabrics, add sashing and borders, and connect your quilt design to a practical cutting and buying plan.
Illustrative fabric quotes. Widths are usable after selvages and prewashing. Backing, batting, binding, tax and quilting shrinkage are excluded.
Equal square blocks, up to 1000 mm.
Positive, up to 25.4 mm. Cut pieces include two edge allowances.
Zero omits sashing. No cornerstones are used.
Zero omits the border. Side borders attach before top and bottom.
Whole number 1–30; apply the new grid size below.
Whole number 1–30. Shrinking removes cells outside the new grid.
Paint your block grid
Choose Active fabric, then select a cell to assign it. Each cell shows its fabric number. Arrow keys move between cells; Enter or Space paints the focused cell.
Three uppercase letters, for example USD. All quotes use this label; no currency conversion.
Fabric quotes
Up to eight fabrics. To remove one, first choose another Active fabric to receive its blocks and trim.
Your finished quilt top
24 × 17 in before quilting shrinkage. Raw assembled top, including outer edge allowances: 24.5 × 17.5 in.
- 1. Ocean · diagonal pattern
- 2. Sand · dot pattern
Dimensions use a uniform scale. Very narrow trim may be hard to distinguish; its exact cut sizes are in the schedule.
Fabric purchase summary
Independent shelves per cut group, stacked on each fabric. No reuse of side remnants or global nesting optimization.
| Fabric | Raw / purchase (in) | Cost (USD) | Pieces / shelf offcuts (in²) | Purchase remnant (in²) |
|---|---|---|---|---|
| Ocean | 9.5 / 18 | 6 | 196.5 / 202.5 | 357 |
| Sand | 14 / 18 | 6 | 316.75 / 271.25 | 168 |
Cutting schedule
| Group / fabric | Pieces | Raw cut size (in) | Chosen layout | Inspect |
|---|---|---|---|---|
| Square blocksOcean | 3 | 6.5 × 6.5 | authored · 1 shelves | |
| Square blocksSand | 3 | 6.5 × 6.5 | authored · 1 shelves | |
| Vertical sashingOcean | 4 | 1.5 × 6.5 | rotated · 1 shelves | |
| Horizontal sashingOcean | 1 | 20.5 × 1.5 | authored · 1 shelves | |
| Side bordersSand | 2 | 2.5 × 13.5 | rotated · 1 shelves | |
| Top and bottom bordersSand | 2 | 24.5 × 2.5 | authored · 2 shelves |
Cut inspector: Square blocks — Ocean
- authored: 6 across, 1 shelves, 6.5 in raw bolt length
Shelf 1: 3 pieces, each 6.5 × 6.5 in. Starts 0 in along this group’s fabric section. White space at the right is the unused shelf width.
Save your design and cut list
CSV includes the complete grid, all cuts and shelves, both orientation candidates, exact dimensions and material accounting. Results use millimetres and square millimetres regardless of display units; import fractions as text.
How to use this calculator
- Load Checkerboard lap quilt or Narrow fabric example, then open Edit quilt and fabrics. Choose display units; conversions preserve the original dimensions until you edit them.
- Enter Finished block side, Seam allowance per edge and optional Finished sashing width and Finished border width. Enter Grid rows and Grid columns, then Apply grid size. Reducing the grid removes cells outside its new boundary.
- Choose Active fabric and Alternate pattern fabric. Fill checkerboard, rows or columns, or select individual cells to paint them. The cell number identifies its fabric; arrow keys move focus and Enter or Space paints.
- Choose Sashing fabric and Border fabric. In each Fabric quote enter usable width, purchase increment, the length covered by its price and the price. Permit 90° rotation only when grain and print direction allow it. To remove a fabric, choose a different Active fabric as its replacement.
- Select Update quilt plan. Review finished dimensions, fabric purchases and any unsupported groups. Inspect a group and shelf to see cut orientation, piece count and remaining width. Change the design or fabric when a long strip cannot fit.
- Download quilt-top CSV or open Show selectable CSV for the entire design, exact dimensions and cutting/material schedules. Result dimensions are in mm regardless of display units. Use the backing and binding calculator separately for finishing materials.
The Formula
The mathematical logic powering this calculation is:
For R rows, C columns, finished square side B, finished sashing width S and border width T: inner width Iw = CB + (C−1)S and inner height Ih = RB + (R−1)S. Finished top W = Iw+2T and H = Ih+2T. With per-edge seam allowance A, raw assembled top dimensions before attaching its edges are W+2A and H+2A.
Each raw block is (B+2A) square. If S>0, cut R(C−1) vertical sashing pieces of (S+2A) × (B+2A), plus R−1 horizontal strips of (Iw+2A) × (S+2A). There are no cornerstones. If T>0, cut two side borders (T+2A) × (Ih+2A), attach those first, then cut two top/bottom borders (W+2A) × (T+2A). Zero sashing or border width omits those groups.
For a group of N identical rectangles with authored width w across fabric and height h along the bolt, usable fabric width F gives k=floor(F/w) pieces per shelf. If k>0, n=ceil(N/k) shelves use raw bolt length nh. If rotation is permitted, also evaluate swapped dimensions. Select the feasible orientation with least raw length, keeping authored orientation on ties. Groups remain separate and use uniform shelves; offcuts are not reused, so this is not globally optimal two-dimensional nesting.
Sum chosen group lengths L by fabric. Purchase P=ceil(L/I)I for entered purchase increment I. Quote cost = P/Q × price, where Q is the entered length covered by that price. Material accounting: purchased area FP = raw piece area + shelf offcuts + purchase-rounding remnant. Raw piece area includes seam allowances; it is not finished top area. Unused fabrics have zero purchase and cost.
If a group cannot fit in any allowed orientation, retain its required pieces but withhold the affected fabric purchase and cost. Overall cost is unavailable if any fabric is unsupported; independently feasible fabrics remain available. No strip is silently split or joined.
All authored lengths use exact integer millionths of a millimetre. One inch is exactly 25.4 mm. Lengths accept six decimals in mm or five in inches; result lengths, areas and costs are reduced rational values. Display rounding does not change purchasing decisions. Shelf offsets are relative to the beginning of their group, not the whole bolt.
Bounds: 1–30 rows and columns, 1–8 fabrics, finished block side positive through 1000 mm, positive seam allowance through 25.4 mm, sashing/border 0–1000 mm, usable width positive through 5000 mm, purchase increment and quoted length positive through 10000 mm, price 0–1000000 with up to four decimals. Names allow 80 characters. Price labels use three uppercase currency letters and perform no conversion.
No triangles, diagonal setting, cornerstones, print matching, shrinkage, selvage removal, global nesting, bias cutting, tax, delivery, backing, batting or binding is inferred. Use already usable widths and explicit grain/rotation choices. Finished design dimensions are before quilting shrinkage.Worked Example
If you input:
- Grid and blocks: 2 rows × 3 columns, alternating Ocean and Sand; each block finishes at 6 in.
- Sashing and borders: 1 in sashing in Ocean; 2 in border in Sand; 0.25 in seam allowance.
- Fabric quotes: Both fabrics: 42 in usable width, 9 in purchase increments, USD 12 per 36 in; rotation permitted.
Result:
The inner layout is 20 × 13 in and the finished top is 24 × 17 in. Six blocks are cut at 6.5 × 6.5 in, three from each fabric. Ocean also supplies four 1.5 × 6.5 in vertical sashing pieces and one 20.5 × 1.5 in horizontal strip. Its raw bolt requirement is 9.5 in. Sand supplies two 2.5 × 13.5 in side borders and two 24.5 × 2.5 in top/bottom borders; including its blocks, raw length is 14 in. Each fabric rounds to an 18 in purchase. At USD 12 per yard, each costs USD 6, for USD 12 total before tax or delivery.
Frequently Asked Questions
How is this different from the quilt backing calculator?
This tool designs a square-block top and calculates its blocks, sashing and borders. The backing and binding calculator starts from an already measured top and plans backing panels, batting and binding. Use the measured top after assembly for that later step rather than assuming sewing and quilting introduce no size changes.
Does a finished block size include seam allowances?
No. A 6 in finished block with 0.25 in per-edge allowances is cut as a 6.5 in square. Each piece in the cutting schedule includes its required edge allowances. The finished layout and raw cut schedule therefore show different dimensions intentionally.
Why can rotation greatly change fabric use?
A long narrow strip may be cut across the usable width or along the bolt. If a 20.5 in strip cannot fit across a 7 in fabric, rotating its 1.5 in width across the bolt can make it feasible. This is offered only when you explicitly permit rotation; grain and directional prints may forbid it.
Is the cutting layout the least possible yardage?
It chooses the shortest feasible uniform-shelf orientation separately for each cut group and then rounds the combined length for each fabric to its purchase increment. It does not mix different groups on a shelf, reuse side offcuts or search arbitrary nesting arrangements. A skilled cutting plan may use less material.
What happens when a strip does not fit?
The required group stays visible, and the affected fabric purchase and total quote cost become unavailable. Other feasible fabrics still have results. You can widen the fabric, permit rotation when appropriate or change the design. The calculator does not invent an extra piecing seam or silently omit a required strip.
Can I remove a fabric without leaving missing blocks?
Choose another Active fabric first. Removing a fabric transfers its blocks, sashing and border assignments to that replacement. Copying keeps the quote drafts but gives the new fabric a separate identity. New blank quotes must be completed before updating the plan.
Why do unit changes leave quantities unchanged?
The planner keeps each dimension in its originally entered unit and converts only its display. Editing establishes a new value in the selected unit. Blank inputs remain blank; malformed length text blocks a unit change until corrected. Very small nonzero dimensions retain a nonzero display.
Does this include shrinkage, backing or binding?
No. Supply usable fabric widths after your own selvage/prewashing allowances, and check actual sewn dimensions. The result describes the top before quilting shrinkage. Backing, batting, binding, taxes, delivery and fabric pattern matching require separate planning.
Similar Calculators
Quilt Backing and Binding Calculator
Compare quilt backing widths and seam directions with linked cut diagrams. Plan batting, binding strips and fabric purchases, then export the complete schedule.
Curtain Fabric & Cutting Planner
Plan curtain fabric for multiple windows. Compare widths, fullness, seams, hems and pattern repeats with linked cutting diagrams, exact material ledgers and CSV.
Circle Skirt Calculator
Compare circle-skirt fullness, panel dimensions and conservative fabric layouts. Inspect seam and cut lines, then export a calibrated SVG pattern.
