Curtain Fabric & Cutting Planner
Turn window measurements into a traceable face-fabric purchase and cutting plan. Plan single curtains or symmetric pairs, including an odd shared fabric drop split between the pair. Compare up to three fabric widths, straight vertical repeats, purchase increments and entered prices across multiple windows and identical sets. Linked source-roll and assembled-curtain diagrams show where each piece goes; exact area accounting separates finished fabric, allowances, repeat adjustment, positioning reserve and purchase remnants. This is a declared conservative construction, not a universal sewing pattern or a prediction of fabric suitability. It excludes lining, shrinkage, half-drop matching and exact pleat geometry.
Follow every drop into your curtains
Compare fabric widths and repeats, see how a shared split drop makes a pair, and account for every allowance before you order.
Plan face fabric only, using plain or confirmed straight-repeat fabric. Lining, shrinkage, exact pleats and half-drop patterns are outside this construction. Examples use fictional measurements and prices.
Plain fabric: order 7,500 mm; estimated fabric cost USD 187.50.
Project dimensions and fabric options
Fullness is the finished flat fabric width divided by your covered span. Whole fabric drops can provide more fullness than requested. All windows share the edge and length allowances below.
Required; preserve blank drafts until you have the value.
Use a confirmed dimension or an explicit allowance.
Enter total material folded in, not the visible depth of one fold.
Use a confirmed dimension or an explicit allowance.
Enter total material folded in, not the visible depth of one fold.
Use a confirmed dimension or an explicit allowance.
Windows and identical sets
Alternative face fabrics
Compare each fabric as a complete project purchase. Confirm pattern matching at joined edges. A straight repeat does not model staggered or half-drop matching.
Compare complete fabric purchases
Bars share a length scale. Wider fabric may need less length without costing less. Confirm fabric suitability separately.
Plain fabric
Order 7,500 mm · USD 187.50 · 3 full-width drops
Required before purchase rounding: 7,500 mm. Rounded cost display; exact values are in the report.
From the roll to the finished flat curtains
This set uses 3 source drops of 2,500 mm each. Finished width is 1,990 mm per curtain, with 380 mm extra flat width above the requested minimum. Headings are not drawn as folds.
Usable width 1,400 mm. Roll positions 0 mm to 7,500 mm. Blue outline identifies drop 1; dashed cut splits a shared drop. Tiny drops may not be distinguishable here.
Curtain 1 · 1,990 mm
Curtain 2 · 1,990 mm
Borders mark joined piece boundaries. Side hems and seams are consumed before this finished-width view. Width and height are normalized separately; no print motif or real pleat shape is implied.
Selected source drop 1
Raw rectangle: 1,400 mm × 2,500 mm. Roll interval: 0 mm–2,500 mm.
- Curtain 1, piece 2: source width interval 0 mm–1,400 mm becomes 1,345 mm flat width after 15 mm left and 40 mm right consumption.
Every part of the purchase is accounted for
Finished fabric, allowances, pattern adjustment and purchase remnants reconcile exactly. Corners are counted once in length allowances. Area values below are rounded for display; the exact certificates remain available.
- Finished flat curtains
- 8,756,000 mm²
- Side hems and joining allowances
- 484,000 mm²
- Heading allowance
- 336,000 mm²
- Bottom hems
- 840,000 mm²
- Length trimming
- 84,000 mm²
- Pattern-repeat adjustment
- 0 mm²
- Positioning reserve
- 0 mm²
- Purchase rounding remnant
- 0 mm²
- Total purchased fabric
- 10,500,000 mm²
Positioning reserve: 0 mm. Purchase remnant: 0 mm. Fabric is not reused across different windows or sets.
Exact material and cost certificates
Complete source-drop schedule
All windows and sets for Plain fabric, in cutting order. Each row is a full-width drop; a shared row splits into two half-width pieces. Measurements are in mm.
| Window / set / drop | Cut length | Roll start | Roll end | Construction | Inspect |
|---|---|---|---|---|---|
| Living roomSet 1 · drop 1 | 2,500 mm | 0 mm | 2,500 mm | Whole-width piece | |
| Living roomSet 1 · drop 2 | 2,500 mm | 2,500 mm | 5,000 mm | Whole-width piece | |
| Living roomSet 1 · drop 3 | 2,500 mm | 5,000 mm | 7,500 mm | Split equally across pair |
Save the full cutting report
The CSV includes original inputs, all fabric alternatives, source rectangles, assembled pieces and exact rational material/cost values. Formula-like labels receive a protective apostrophe.
How to use this calculator
- Load Single-pair example or Multiple windows + fabrics. Open Edit project and fabrics. Choose millimetres or inches; original measurements remain authoritative until edited.
- Enter joining allowance per edge, total side-hem consumption, heading, bottom hem and extra trimming. Enter total folded-in hem material, not just the visible depth of one fold.
- For each window, enter covered span including overlap/returns, finished drop, minimum fullness, one or two curtains, and the number of identical sets. Copy rows for repeated measurements or add a blank window.
- Enter each fabric’s usable width, pattern mode, measured repeat, purchase increment, quoted price and pricing length. Plain requires zero repeat; straight repeat requires a positive value. Confirm whether one project-wide positioning repeat is needed.
- Inspect a fabric option, window and identical set. Choose a source drop to highlight its pieces in both diagrams. Review actual fullness and exact material accounting; use the source-cut table to inspect other sets.
- Download the complete curtain-plan CSV or copy its selectable fallback. It includes every alternative and exact source/assembly records. Confirm fabric matching and sewing technique before ordering or cutting.
The Formula
The mathematical logic powering this calculation is:
All canonical measurements are exact rational millimetres; 1 inch = 25.4 mm exactly. Unit switches preserve the original authored value until the field is edited. Rounded display values never determine a cut count or purchase ceiling.
Let F be usable fabric width, a the joining allowance per joined edge and h the total side-hem consumption per outside edge. A single curtain from n full widths has finished flat width nF − 2a(n−1) − 2h. A symmetric pair using N full-width source drops has k = ceil(N/2) pieces per curtain and per-curtain flat width NF/2 − 2a(k−1) − 2h.
For an even N, each curtain uses N/2 whole widths. For an odd N, each uses floor(N/2) whole widths plus half of the final shared drop. The left curtain takes the right source half at its outside edge; the right curtain takes the left source half at its outside edge. Fabric is not turned, reflected or flipped. Every piece must retain positive width after its seams and outside hems.
Enumerate 1 through 100 source drops per window/set and select the first valid construction whose combined finished flat width is at least coverage × requested fullness. Coverage includes your entered overlap and returns. Actual fullness = combined finished flat width / coverage. All usable width is retained, so actual fullness can exceed the requested minimum. This is not a globally optimized nested layout.
Base drop D = finished drop + heading allowance + bottom-hem allowance + extra trimming. Plain cut length A = D. For a confirmed straight vertical repeat R > 0, A = ceil(D/R)R. An optional positioning reserve adds R once to the complete fabric option, not once per window. Half-drop or staggered matches are unsupported.
Required roll length = positioning reserve + sum of all full-width cut-drop lengths. The shared split drop consumes its length once. Ordered length = ceil(required length / purchase increment) × purchase increment. Cost = ordered length / pricing length × entered price. Prices are your assumptions; no automatic tax, shipping or supplier minimum is added.
Purchased area = finished flat curtain area + width allowance area + heading area + bottom-hem area + trimming area + repeat-adjustment area + positioning-reserve area + purchase-rounding-remnant area. For each piece, width allowance area = (raw width − finished width) × finished drop; each length allowance uses raw width. This assigns corner intersections once rather than double-counting them.
Supports 1–8 window rows, 1–20 identical sets per row, 1 or 2 curtains per set, and 1–3 fabric alternatives. Coverage is 1–20000 mm, finished drop 1–10000 mm, fullness 1–4, usable width 1–5000 mm, seams 0–50 mm, side hems 0–200 mm, heading 0–500 mm, bottom hems 0–1000 mm and trimming 0–100 mm. Straight repeat is above 0 through 2000 mm; plain repeat must be zero. Purchase and pricing lengths are above 0 through 10000 mm. Enter price 0–1000000 with at most two decimals.
Authored lengths accept up to six mm or five inch decimals; fullness accepts four decimals. No blank, signed, exponent, grouped or whitespace numeric tokens. Counts are whole numbers. Exact fractions appear in reports or when a nonzero value is too small for ordinary display rounding; edited inputs use decimal notation. Each fabric alternative is limited to 2000 materialized source drops. Unsupported options retain a reason, not a partial purchase disguised as a result.
Source drops follow window input order, identical-set order and drop order. Offcuts are not pooled between windows or sets. Diagrams are normalized schematics with independent horizontal/vertical scales; they do not depict a fabric print or physical folds. Real measurements, supplier pattern matching and sewing allowances must be confirmed before cutting.Worked Example
If you input:
- Window: 1800 mm total coverage; 2200 mm finished drop; fullness 2; a pair; one set.
- Allowances: 15 mm per joined edge; 40 mm per outside side hem; 80 mm heading; 200 mm bottom hem; 20 mm trimming.
- Fabric: 1400 mm usable plain width; 100 mm purchase increment; USD 25.00 per 1000 mm.
Result:
Two full-width drops provide only 2640 mm combined flat width, below the 3600 mm target. Three drops provide 3980 mm, or 1990 mm per curtain, with actual fullness 199/90 ≈ 2.2111. The final drop is split between the two curtains. Each raw drop is 2500 mm, so order 7500 mm for USD 187.50. Purchased area is 10,500,000 mm²: 8,756,000 finished, 484,000 in side/joining allowances and 1,260,000 in length allowances. For the same pair using a 320 mm straight repeat and one positioning repeat, cut drops become 2560 mm and the purchase becomes 8000 mm, costing USD 200.00 at the same price. These are fictional measurements and prices.
Frequently Asked Questions
How is curtain fullness different from the final covered width?
Fullness compares flat finished fabric width with the span it will cover after gathering or pleating. The planner uses your minimum ratio and retains whole usable widths, so the actual ratio can be higher. It does not calculate a pleat count or automatically add overlap and returns.
How does an odd number of fabric drops make a symmetric pair?
The final full-width drop is split lengthwise into two halves. Each curtain receives one half plus the same number of whole widths. The halves go on outside edges with original joining sides facing the adjacent full panels. A shared drop consumes roll length once, and the diagrams link both resulting pieces to it.
Can I use half-drop or staggered pattern fabric?
No. Those patterns require different offsets and joining sequences. This version supports plain fabric and confirmed straight vertical repeats only. Check the supplier’s actual measured repeat and edge-matching behavior rather than inferring it from a motif image.
Why reserve an extra pattern repeat?
It provides conservative length to choose the initial motif position. The reserve is added once across each complete patterned fabric option; later adjusted drops preserve the selected phase because their lengths are whole repeats. It does not simulate horizontal motif placement or pleating to pattern.
Does the shortest purchase necessarily cost the least?
No. Fabrics can have different widths, purchase increments and prices per metre, yard or another pricing length. The comparison reports both quantity and cost using your entered quotes. It makes no judgment about quality or suitability.
Why does switching units keep the original measurement?
Many inch/mm conversions do not terminate at the display precision. Keeping the authored quantity prevents a rounded conversion from changing a discrete cut or purchase decision. Editing a converted field intentionally replaces that measurement with your new decimal entry.
What is excluded from the material estimate?
Lining, interlining, shrinkage, hardware, heading tape, supplier defects, railroading, shaped curtains, exact pleats and global offcut reuse are not modeled. Usable width should already reflect selvages and prewashing. The source schedule uses the declared sequential construction.
Why can one fabric option be unsupported while another works?
Some widths leave no positive piece after hems and seams. Other layouts need more than 100 drops per set or more than 2000 drops for the project. The planner preserves supported alternatives and gives the unavailable option a reason without reducing your requested fullness or presenting an incomplete order.
Similar Calculators
Quilt Backing and Binding Calculator
Compare quilt backing widths and seam directions with linked cut diagrams. Plan batting, binding strips and fabric purchases, then export the complete schedule.
Circle Skirt Calculator
Compare circle-skirt fullness, panel dimensions and conservative fabric layouts. Inspect seam and cut lines, then export a calibrated SVG pattern.
Wallpaper Calculator
Estimate wallpaper rolls with pattern repeat, half-drop matching, trim and spare rolls. See a wall-by-wall strip layout, cutting schedule and cost.
Unit Converter
Convert between units of length, weight, volume, and area — all in one tool.
