Circle Skirt Calculator

Plan your skirt from entered waist, ease and finished length. Compare panel choices and see how their cutting envelopes fit your fabric width.

Plan your skirt, piece by piece.

Compare fullness, trace seam and cutting lines, and see how the pieces fit on your fabric. Keep the measurements and allowances you choose visible all the way through.

2 pieces; conservative fabric length ≈144.101 cm.

Try an editable example

Your measurements

Measure where the skirt will sit.

Additional circumference you choose; no fit allowance is assumed.

From the waist seam line to the finished hem.

Changing units preserves physical dimensions and source text.

Decimals and fractions such as 3/8 or 12 1/2 are accepted. The opening is waist plus ease; choose measurements suitable for your closure or elastic. This tool does not determine whether an unbroken waist opening can pass over the hips.

Choose the shape

A whole circle is one unfolded annulus. Equal panels add separately measured side seams.

Fullness is the total circular sweep before the pieces are joined.

1–16 actual pieces. Each seamed panel must span at most 180°.

Allow a quarter-turn only when the fabric's grain, nap and print permit it.

Cutting allowances

Added inward from the waist seam, making the cut opening smaller.

Added beyond the finished hem radius.

Constant perpendicular distance outside each radial seam line.

Allowances are your inputs. There is no automatic bias-stretch or shrinkage correction. A different sewing construction may need a different cutting outline.

Your fabric

Usable width after excluding selvages or damaged edges.

Clear space between the rectangular envelopes and between rows.

The layout uses flat fabric and complete piece envelopes. Add your own reserve for shrinkage, print matching, waistband, lining or other pieces; they are not included in this length.

Your current plan

Conservative fabric length

≈144.101 cm

2 pieces · 2 rows · up to 1 across · 0° orientation

Shortest of the tested uniform row arrangements, within the stated numerical resolution. Curved offcuts are not nested.

Waist opening
≈82 cm
Finished hem circumference
≈427.575 cm
Waist cut radius
≈12.0507 cm
Hem cut radius
≈70.0507 cm

Inspect the shape and layout

Your pattern piece

A flat piece at equal horizontal and vertical scale. The solid cutting edge includes your allowances; dashed lines show where the finished shape is measured.

Analytic circular arcs and straight allowance edges. Solid blue identifies cutting lines, dashed purple stitching or finished-hem lines, dotted gray fold references, and a black arrow the orientation reference. Coordinates and dimensions are also available in the inspection and tables.
Horizontal coordinates
≈-70.0507 cm to ≈0 cm to ≈70.0507 cm
Vertical coordinates · up from centre
≈-1.5 cm to ≈34.2754 cm to ≈70.0507 cm
  • Cut edge
  • Seam / finished hem
  • Fold reference
  • Black arrow: orientation reference

outer-left

X
≈-70.0346436967 cm
Y
≈-1.5 cm

Measured from the circle centre: x points right, y points up. The chart marker identifies this endpoint.

Compare your options

Compare construction and panel counts · 16

Each row keeps your waist, length, allowances and fabric width. Length is the selected conservative arrangement for that count. More seams do not always save fabric. Choose a row explicitly to change your pattern.

Complete panel-count comparison
ConstructionPiece envelopeCut area · all piecesFabric lengthStatusChoose
2 panels≈140.101410667 cm × ≈71.5507053335 cm≈15308.0479645 cm²≈144.101410667 cm2 rows · 1 across · 0°Envelope layout fits
3 panels≈122.803561173 cm × ≈65.3712507564 cm≈15482.1254773 cm²≈198.113752269 cm3 rows · 1 across · 0°Envelope layout fits
4 panels≈101.165263295 cm × ≈62.6565000707 cm≈15656.2029901 cm²≈253.626000283 cm4 rows · 1 across · 0°Envelope layout fits
5 panels≈84.7577124121 cm × ≈61.2589788496 cm≈15830.2805029 cm²≈310.294894248 cm5 rows · 1 across · 0°Envelope layout fits
6 panels≈72.6327199081 cm × ≈60.4456522542 cm≈16004.3580157 cm²≈183.336956762 cm3 rows · 2 across · 0°Envelope layout fits
7 panels≈63.4766927535 cm × ≈59.9286593737 cm≈16178.4355285 cm²≈242.714637495 cm4 rows · 2 across · 0°Envelope layout fits
8 panels≈56.3738342662 cm × ≈59.5779164322 cm≈16352.5130413 cm²≈241.311665729 cm4 rows · 2 across · 0°Envelope layout fits
9 panels≈50.7255956122 cm × ≈59.3278446335 cm≈16526.5905541 cm²≈300.639223168 cm5 rows · 2 across · 0°Envelope layout fits
10 panels≈46.1369597434 cm × ≈59.1424619778 cm≈16700.6680669 cm²≈239.569847911 cm4 rows · 3 across · 0°Envelope layout fits
11 panels≈42.3405573932 cm × ≈59.0006607248 cm≈16874.7455797 cm²≈239.002642899 cm4 rows · 3 across · 0°Envelope layout fits
12 panels≈39.1503766902 cm × ≈58.8893729319 cm≈17048.8230925 cm²≈238.557491728 cm4 rows · 3 across · 0°Envelope layout fits
13 panels≈36.4336000111 cm × ≈58.8001417281 cm≈17222.9006053 cm²≈238.200566912 cm4 rows · 4 across · 0°Envelope layout fits
14 panels≈34.0931323859 cm × ≈58.7272879559 cm≈17396.9781181 cm²≈237.909151824 cm4 rows · 4 across · 0°Envelope layout fits
15 panels≈32.0564851758 cm × ≈58.6668763223 cm≈17571.0556309 cm²≈237.667505289 cm4 rows · 4 across · 0°Envelope layout fits
16 panels≈30.2685182234 cm × ≈58.6161055719 cm≈17745.1331437 cm²≈237.464422288 cm4 rows · 4 across · 0°Envelope layout fits
Whole circle≈140.101410667 cm × ≈140.101410667 cm≈14959.8929389 cm²≈140.101410667 cm1 rows · 1 across · 0°Envelope layout fits
Compare five fullnesses

The waist opening and finished length stay fixed. These are flat measurements; actual drape depends on the fabric. Choosing another fullness uses equal panels and the count stated on its button.

Fullness comparison at the current measurements
FullnessWaist seam radiusFinished hem circumferenceFinished areaChoose
Quarter circle≈52.2028213341 cm≈168.393797974 cm≈6885.82944428 cm²
Half circle≈26.1014106671 cm≈254.787595947 cm≈9261.65888855 cm²
Three-quarter circle≈17.4009404447 cm≈341.181393921 cm≈11637.4883328 cm²
Full circle≈13.0507053335 cm≈427.575191895 cm≈14013.3177771 cm²
Double circle≈6.52535266677 cm≈773.15038379 cm≈23516.6355542 cm²

Measurements and placement tables

All quantities come from the current plan. Wide tables scroll within their own region; focus a table region to use the arrow keys.

Pattern measurements
Pattern radii, lengths and areas
MeasurementValue
Sewn angle per piece≈180°
Waist seam radius≈13.0507053335 cm
Finished hem radius≈68.0507053335 cm
Waist cut radius≈12.0507053335 cm
Hem cut radius≈70.0507053335 cm
Side allowance applied≈1.5 cm
Cut waist arc per piece≈40.8662087563 cm
Cut hem arc per piece≈223.071010562 cm
Straight side cut length≈58.077658331 cm
Cut area per piece≈7654.02398224 cm²
Cut area · all pieces≈15308.0479645 cm²
Finished area per piece≈7006.65888855 cm²
Finished area · all pieces≈14013.3177771 cm²
Pattern checkpoints · 4
Complete pattern checkpoint ledger
PointX from centreY from centre
outer-left≈-70.0346436967 cm≈-1.5 cm
outer-right≈70.0346436967 cm≈-1.5 cm
inner-right≈11.9569853657 cm≈-1.5 cm
inner-left≈-11.9569853657 cm≈-1.5 cm
Fabric placements · 2
Complete fabric placement ledger
PieceRow / columnOrientationEnvelope XEnvelope YWidthHeight
piece-11 / 10°≈0 cm≈0 cm≈140.101410667 cm≈71.5507053335 cm
piece-22 / 10°≈0 cm≈72.5507053335 cm≈140.101410667 cm≈71.5507053335 cm
All tested row arrangements · 2
Complete current arrangement comparison
ArrangementAcross / rowsUsed widthRequired lengthWidth marginStatus
0° · o0-c11 / 2≈140.101410667 cm≈144.101410667 cm≈9.89858933293 cmEnvelope layout fits
0° · o0-c22 / 1≈281.202821334 cm≈71.5507053335 cm≈-131.202821334 cmNo tested layout fits
Material accounting
Fabric area accounting
QuantityArea
Complete cut pieces≈15308.0479645 cm²
Complete rectangular envelopes≈20048.7095029 cm²
Inside envelopes, outside cut pieces≈4740.66153843 cm²
Outside envelopes on the reserved fabric≈1566.50209716 cm²
Total unused fabric area≈6307.16363559 cm²
Fabric width × reserved length≈21615.2116001 cm²

Unused area includes waist holes and curved spaces; it is not a measured stock of reusable offcuts. Waistband, closure, lining and other pieces are not placed here.

Save, inspect and reuse your plan

The SVG contains one complete piece, its cutting and seam lines, orientation reference and a 100 mm calibration square. It has physical dimensions for full-size output; it does not tile pages for a home printer. Check actual printed scale. A supported pattern can be exported even when the fabric layout does not fit.

Selectable reusable input
Selectable report CSV

Includes input, assumptions, all comparisons, current geometry, placements and inspection. Values preserve model precision; derived geometry is approximate.

Restore saved inputs

Choose a saved JSON input or paste its complete text. Preview first; your current measurements stay in place until you apply.

Calculation conventions and limits
  • Waist plus entered ease defines the stitching circumference; fit, closure and bias growth are not inferred.
  • Allowances are explicit circular offsets and parallel side offsets within the stated topology domain.
  • Fabric layouts use complete bounding rectangles in uniform rows; they are conservative tested arrangements, not optimal nesting or purchase-yardage guarantees.
  • Usable width excludes unusable selvages; shrinkage, print matching, waistband, lining and fasteners are outside this plan.
  • All geometric values are approximate Number calculations; boundary bands are resolution policies, not rigorous interval proofs.

How to use this calculator

  1. Enter Waist measurement, Wearing ease and Finished skirt length in your chosen Length unit. Waist plus ease is the intended stitching-line circumference; the tool does not choose body ease, elastic stretch or closure access. Decimal, scientific, simple-fraction and mixed-fraction inputs are supported within the stated bounds.
  2. Choose Skirt fullness and Construction, then Number of panels. Equal panels count actual cut pieces, not folded layers; each sewn panel can span at most 180°. Whole circle selects full fullness and one piece. Compare other counts and adopt one explicitly rather than assuming the current count changed.
  3. Enter Waist seam allowance, Hem allowance and Side seam allowance. Inspect the separate stitching and cutting lines. Whole-circle construction retains the side allowance without applying it. Unsupported allowance geometry keeps its explanation and any supported alternatives.
  4. Enter Usable fabric width and Gap between pieces. Set Fabric orientation to allow a quarter-turn only if that orientation suits your fabric. The layout places complete bounding rectangles in rows; it does not infer grain suitability, matching prints, shrinkage, waistband material or minimum purchase yardage.
  5. Inspect Pattern piece and Fabric layout with their point, piece and measurement tables. A valid piece can remain available even when no tested fabric arrangement fits. Small-detail notices mean the screen may not distinguish every feature at that scale; consult the measurements rather than stretching the drawing.
  6. Save reusable JSON or use Paste reusable input to preview a complete plan before applying it. Download the complete CSV report for current results. A supported piece also has a 1:1 measurement-pattern SVG with a 100 mm calibration square; verify printed scale. This export is not a tiled PDF or an automatic home-print layout.

The Formula

The mathematical logic powering this calculation is:

Let C be entered waist plus ease, L finished length and f fullness: 1/4, 1/2, 3/4, 1 or 2. Waist seam radius a = C/(2πf); finished hem radius b = a + L. Finished hem circumference = C + 2πfL and finished flat area = CL + πfL². Equal panels divide the total sewn angle 2πf into n actual pieces, each at most 180°. Whole-circle construction is one full annulus only.
Waist allowance moves the inner cut radius to r = a − waist allowance; hem allowance moves the outer cut radius to R = b + hem allowance. Equal-panel side cut lines are parallel offsets of the radial seam lines, a perpendicular distance s outward. Their intersections with each circular cut line define the contour. The supported geometry requires clearly positive r and s < r sin(πf/n); an unavailable or numerically unresolved contour is reported explicitly. Whole-circle construction does not apply a radial side allowance. These are the calculator's declared geometric conventions, not a reproduction of a named sewing pattern.
Each cut outline is enclosed by its complete bounding rectangle, including curved extrema. For k envelopes across, width used = k × envelope width + (k − 1) × piece gap; rows = ceiling(n/k), and fabric length = rows × envelope height + (rows − 1) × piece gap. Test permitted uniform 0°/90° orientations and k = 1…n. Choose the shortest clearly fitting listed arrangement, with the stated tie rules. Curved nesting, mixed orientations and placement inside waist openings are not optimized.
One inch is exactly 2.54 cm. Measurements retain their original unit information through conversion; radii, arcs, areas and placements calculated with π and trigonometry are approximate. Seam-line circumference differs from the allowance-expanded cutting arc. A geometry limit or near-width boundary is not rounded into a successful fit.

Worked Example

If you input:

  • Length unit: cm
  • Waist measurement: 80 cm
  • Wearing ease: 2 cm
  • Finished skirt length: 55 cm
  • Skirt fullness: Full circle
  • Construction: Equal panels
  • Number of panels: 2
  • Waist seam allowance: 1 cm
  • Hem allowance: 2 cm
  • Side seam allowance: 1.5 cm
  • Usable fabric width: 150 cm
  • Gap between pieces: 1 cm
  • Fabric orientation: Keep lengthwise orientation

Result:

The sewn waist circumference is 82 cm. Waist and hem seam radii are approximately 13.050705 and 68.050705 cm; cutting radii are 12.050705 and 70.050705 cm. Each of the two panels has an enclosing rectangle about 140.101411 × 71.550705 cm. One panel across and two rows use approximately 144.101411 cm of fabric length at the entered 150 cm width and 1 cm gap. The finished hem circumference is approximately 427.575192 cm; combined cut area is 15,308.047964 cm². This is the stated conservative arrangement, excluding waistband, closure and other construction pieces. Inputs are illustrative choices, not fit or allowance recommendations.

Frequently Asked Questions

Why does fullness change the waist radius?

The same entered waist-plus-ease circumference is distributed over a different total angle. A quarter circle uses 90°, a half circle 180°, a three-quarter circle 270°, a full circle 360° and a double circle 720° across its separate panels. More fullness therefore has a smaller waist seam radius at the same circumference and a larger finished hem sweep for the same length. The comparison describes flat geometry, not simulated fabric drape.

Is the number of panels the same as the number of folds?

No. Panel count is the number of identical pieces to cut and join. Each equal-panel seam-line angle is at most 180°, so full fullness needs at least two panels and double fullness at least four. Whole-circle construction is a separate full annulus with no radial side seams. Its fold guides show the same unfolded piece and do not halve the fabric envelope. Closure and dressing access still need a separate construction decision.

Do the seam and cut lines use the same waist circumference?

The stitching-line waist is entered waist plus ease. Waist allowance moves the circular cut boundary inward, hem allowance moves the outer boundary outward, and equal-panel side allowances offset the straight stitching edges. The extended cut arc therefore is not a finished-waist measurement. This tool uses a stated geometric offset construction; tutorials that add seam allowance to circumference before finding a radius use a different convention.

Does a fitting fabric layout give the least yardage to buy?

It gives the shortest clearly fitting arrangement among the tested rows of enclosing rectangles at the permitted uniform orientations. It does not nest curves, fill waist holes with other pieces, mix rotations, match prints or account for fabric defects. Space outside the outlines is not guaranteed to be reusable. The fabric width should be the usable width you enter; waistband, lining, fastener, shrinkage and any personal reserve are excluded.

What if my selected panel or fabric width does not work?

An unsupported panel angle or allowance contour is distinct from a supported piece that does not fit the tested fabric layouts. The current choice stays visible; available alternatives do not replace it until you adopt one. Near a numerical boundary, the tool asks for a clear margin instead of certifying equality. A supported piece can still be inspected and exported as SVG when the stated fabric arrangement does not fit.

Can this choose ease or compensate for bias stretch?

No. Ease, allowances, usable width and orientation are explicit choices. Fabric behavior, body shape, elastic stretch, hip passage, closures and hanging hem changes are outside this geometric calculation. A whole-circle opening is not proof that the finished garment can be put on. Treat the dimensions as a measurement pattern to evaluate with your intended fabric and construction method, rather than a fit guarantee.

How do I use the SVG at its intended size?

The file declares physical millimetre dimensions, includes the complete selected piece and carries a 100 mm × 100 mm calibration square. Keep 100% scale in a suitable viewer or print workflow, then measure the calibration square before using the pattern. Browser and printer fit-to-page settings can change the size. The export is not tiled across home-printer pages, and no actual print calibration is implied by a successful download.

Similar Calculators