Wallpaper Calculator
Estimate whole wallpaper rolls from your wall measurements, pattern repeat, and trimming allowance. Explore free, straight, and half-drop matches with a strip layout, cutting plan, spare-roll allowance, and cost estimate in metric or imperial units.
Plan wallpaper by the strip
See how each strip, pattern repeat, and spare roll affects your purchase.
Try a project
Editable examples, not product recommendations.
Converts measurements. Price stays USD.
Walls to cover
Include ordinary doors and windows in the wall dimensions. This plan keeps full-height strips and makes no opening-area deductions.
For a sloping ceiling, use its tallest height. Add any required corner overlap to your measured width. Up to 20 walls and 2,000 strips per plan.
Physical roll and pattern
Read the dimensions on the product label. A seller's “single roll” price may refer to half of a supplied double-roll bolt.
Free match uses no repeat allowance. Follow the label if alternate strips must be reversed.
Enter the combined allowance, not the allowance at each end. Brewster describes 4 in total: 2 in at the top and bottom. Use your product's instructions.
Purchase allowance
Use the price of one complete physical roll, in USD. Adhesive, tools, labor, delivery and tax are excluded.
Wall and roll breakdown
A cut strip includes the full wall height plus total trim. Pattern gaps are separate.
| Wall | Width (m) | Height (m) | Strips | Cut length (m) |
|---|---|---|---|---|
| Wall 1 | 4 | 2.4 | 8 | 2.5 |
| Wall 2 | 3 | 2.4 | 6 | 2.5 |
Opened-roll breakdown (4 rolls)
| Roll | Strips | Cut (m) | Alignment (m) | Remaining (m) |
|---|---|---|---|---|
| 1 | 4 | 10 | 0 | 0 |
| 2 | 4 | 10 | 0 | 0 |
| 3 | 4 | 10 | 0 | 0 |
| 4 | 2 | 5 | 0 | 5 |
Full strip cutting schedule (14 strips)
Phase A starts each wall; half-drop alternates A/B. Alignment below excludes the separate one-repeat reserve at the start of each patterned roll. Confirm the actual motif position before cutting.
| Wall / strip | Roll | Phase | Cut (m) | Gap before (m) |
|---|---|---|---|---|
| 1 / 1 | 1 | Free | 2.5 | 0 |
| 1 / 2 | 1 | Free | 2.5 | 0 |
| 1 / 3 | 1 | Free | 2.5 | 0 |
| 1 / 4 | 1 | Free | 2.5 | 0 |
| 1 / 5 | 2 | Free | 2.5 | 0 |
| 1 / 6 | 2 | Free | 2.5 | 0 |
| 1 / 7 | 2 | Free | 2.5 | 0 |
| 1 / 8 | 2 | Free | 2.5 | 0 |
| 2 / 1 | 3 | Free | 2.5 | 0 |
| 2 / 2 | 3 | Free | 2.5 | 0 |
| 2 / 3 | 3 | Free | 2.5 | 0 |
| 2 / 4 | 3 | Free | 2.5 | 0 |
| 2 / 5 | 4 | Free | 2.5 | 0 |
| 2 / 6 | 4 | Free | 2.5 | 0 |
Method, sources and product limits
For each wall, strips = ceiling(width ÷ roll width). Each cut is wall height + total trim. For patterned paper, the plan reserves one full repeat at each new roll, then advances to the required pattern phase before the next cut: the same phase for straight match, alternating half a repeat for half-drop. A new physical roll begins when the next cut and alignment gap do not fit. The plan follows wall order rather than optimizing reuse of remaining ends.
Brewster's measuring and cutting guidance explains trimming and checking the match. Its wallpaper specifications guide distinguishes repeat, match and single/double-roll packaging. Graham & Brown's measuring guide explains the different match types and why the label matters. The cutting and reserve policy here is an explicit conservative planning assumption, not a manufacturer guarantee.
This model covers ordinary continuous wallpaper rolls on rectangular walls. It does not model murals, pre-cut panels, special A/B roll designs, quarter-drop or other offsets, shrinkage, damaged paper, or complex openings. Keep doors and windows in the measured dimensions; do not treat a cut-out area as a reusable full strip. Confirm unusual projects and matching batches with your installer or supplier before ordering.
How to use this calculator
- Choose metric or imperial units. Enter the width and tallest height of each wall; add walls as needed and keep ordinary doors and windows included.
- Read the physical roll's width and continuous length from its label. If it is sold as a double-roll bolt, use the full bolt length and its full price.
- Choose free, straight or half-drop match. For a patterned product, enter the full vertical repeat; for a 64/32 cm half-drop label, enter 64 cm.
- Enter total trimming allowance for both ends of each strip, the whole unopened spare-roll count, and the price per physical roll in USD.
- Review the purchase total, per-wall strip diagram and roll breakdown. Compare the cutting schedule with the product's installation directions before cutting.
- Download the CSV for the full purchase and cutting plan. Exported dimensions are explicitly in metres, regardless of the display units.
The Formula
The mathematical logic powering this calculation is:
Strips for a wall = ceiling(wall width ÷ physical roll width).
Cut length = wall height + total top-and-bottom trimming allowance.
Patterned rolls reserve one full vertical repeat before the first cut. Between cuts, advance to the next required pattern position: the same position for straight match, or alternating half-repeat positions for half-drop.
Start another physical roll when the next cut plus alignment gap does not fit. Process walls in their entered order without reusing short ends from previous rolls.
Rolls to buy = rolls opened by the cutting plan + whole unopened spare rolls.
Wallpaper cost = rolls to buy × price per physical roll, excluding tax, delivery, adhesive, tools and labor.Worked Example
If you input:
- Measurement units: Metric
- Wall 1 width / height: 4 m / 2.4 m
- Wall 2 width / height: 3 m / 2.4 m
- Physical roll width / length: 53 cm / 10 m
- Pattern match on label: Free / random match
- Total top + bottom trim per strip: 10 cm
- Unopened spare rolls: 1
- Price per physical roll: 45 USD
Result:
Wall 1 requires ceiling(4 ÷ 0.53) = 8 strips; wall 2 requires 6, for 14 total. Each cut is 2.4 + 0.1 = 2.5 m, so a 10 m free-match roll supplies four cuts. The plan opens four rolls and adds one unopened spare: buy five physical rolls for $225 before tax and supplies. The opened rolls contain 35 m of cut strips and 5 m of unused ends.
Frequently Asked Questions
Should I subtract doors and windows from the wall area?
This calculator deliberately keeps ordinary doors and windows inside the wall dimensions. A window may interrupt several full-height strips, and its area does not tell you whether the remaining pieces match another gap. Subtracting opening area as though every cut-out were reusable can understate the roll count. For large openings or extensive offcut reuse, ask an installer to prepare a detailed layout.
What is the difference between free, straight and half-drop match?
Free match has no alignment requirement. Straight match repeats the same pattern position across adjacent strips. Half-drop alternates two positions separated by half the full vertical repeat, returning to the first position on every other strip. A label such as 64/32 cm means a 64 cm full repeat and a 32 cm offset. This calculator supports that half-drop relationship, not arbitrary or quarter-drop offsets.
Why is one full repeat reserved at the start of each patterned roll?
A roll may begin at an unknown point within its pattern. Reserving up to one full repeat allows the first cut to start at the intended position. The schedule then accounts separately for alignment gaps between strips. This is an explicit conservative assumption; a supplier-specific cutting plan may establish a smaller initial loss. It is not an instruction to discard exactly one repeat before checking the design.
Do I enter a single roll or a double roll?
Enter the width and continuous length of the physical roll you will actually unroll. In some markets wallpaper is priced per single-roll unit but supplied as a double-roll bolt. Use both the full supplied length and the full supplied price. For example, two priced units supplied as one 33 ft continuous bolt count as one physical roll in this calculator. Product dimensions vary, so the words single or double are not enough.
Is this the smallest possible number of rolls?
No. It is a transparent sequential cutting plan: walls are processed in the order entered, full-height strips are counted, and short ends from earlier rolls are not brought back into use. Pattern reserves and unopened spare rolls are shown separately. Optimizing wall order, using leftovers around openings, or measuring actual starting motifs may reduce purchases. Conversely, damaged paper, difficult corners or installation errors can require more.
How much extra should I allow for trimming and repairs?
Enter the combined allowance for the top and bottom of each strip. Brewster's general cutting guidance describes 4 in total, with 2 in at each end; follow the particular product's instructions. Spare rolls are a separate whole-number choice for repairs or contingency, not a hidden percentage. Order matching production batches where the supplier requires them.
Can I use this for peel-and-stick panels, murals or A/B roll sets?
Only if the product is an ordinary continuous roll with the free, straight or half-drop relationship modeled here. Pre-cut panels, murals, special coordinated A/B products, other offsets and unusual shapes require their own layout rules. The A/B letters in the strip diagram identify alternating half-drop pattern positions on ordinary rolls; they do not mean special paired products are supported.
What happens when I change units or export the plan?
Changing metric and imperial units converts the measurements instead of relabeling the numbers. Wall and roll length use metres or feet; roll width, trimming and repeat use centimetres or inches. Price remains USD. CSV output uses explicitly labeled metre columns and includes purchase totals, every wall, each opened roll and each strip's pattern position and alignment allowance.
Similar Calculators
Paint Coverage Calculator
Estimate paintable wall area, paint needed, gallons to buy, and project cost with room-by-room deductions.
Tile Project Calculator
Estimate tile quantity, box count, waste allowance, and project material cost.
Brick Masonry Calculator
Estimate brick count, mortar volume, wall area, waste allowance, and masonry material cost.
