Beam Response Calculator
See how entered loads affect a beam. Compare support reactions, inspect shear and moment, and add stiffness to explore slope and deflection.
Beam reactions, shear, moment, slope and deflection updated.
Changing units preserves the quantities you entered.
Positions are measured from the left end.
Loads (1/24)
Include point forces, couples and partial uniform loads. Switching type keeps your earlier values. Self-weight is included only if you enter it.
Largest absolute moment
45 kN·m
At 3 m.
Exact candidate for the entered values.
Largest absolute deflection
≈ 10.54688 mm
At 3 m.
Signed value here: ≈ 10.54688 mm. Positive downward; negative upward.
Exact candidate for the entered values.
Support reactions
- Left force · positive upward
- 30 kN
- Right force · positive upward
- 30 kN
Inspect a section
Positions run from the left end. At an endpoint only the beam’s interior side is used. Select a load event to inspect its exact location.
The slider selects display samples. Event and extremum choices preserve their calculated locations.
- shear · just right
- 0 kN
- moment · just right
- 45 kN·m
- slope · just right
- 0 mrad
- deflection · just right
- ≈ 10.54688 mm
Load and response diagrams
Loads along the beam
Every row uses the same horizontal scale. Arrow sizes are symbolic; values and directions are listed separately.
Reaction signs follow the named positive directions; a negative value points the other way.
Bending moment (M)
Positive moment is sagging. Applied counterclockwise couples create downward moment jumps.
Position from the left end (m)
Solid curves are model response segments; dashed connectors mark jumps, not intermediate section values. Diamonds mark analytical candidates, not necessarily a unique maximum.
Candidate magnitudes within 1e−9 of the largest absolute candidate scale are retained together. This is numerical resolution, not exact equality or a certified physical bound.
Displayed curve values
| Segment | Position | Bending moment (M) | Point source |
|---|---|---|---|
| 1 | 0 m | 0 kN·m | event |
| 1 | ≈ 0.15 m | ≈ 4.3875 kN·m | sample |
| 1 | ≈ 0.3 m | ≈ 8.55 kN·m | sample |
| 1 | ≈ 0.45 m | ≈ 12.4875 kN·m | sample |
| 1 | ≈ 0.6 m | ≈ 16.2 kN·m | sample |
| 1 | ≈ 0.75 m | ≈ 19.6875 kN·m | sample |
| 1 | ≈ 0.9 m | ≈ 22.95 kN·m | sample |
| 1 | ≈ 1.05 m | ≈ 25.9875 kN·m | sample |
| 1 | ≈ 1.2 m | ≈ 28.8 kN·m | sample |
| 1 | ≈ 1.35 m | ≈ 31.3875 kN·m | sample |
| 1 | ≈ 1.5 m | ≈ 33.75 kN·m | sample |
| 1 | ≈ 1.65 m | ≈ 35.8875 kN·m | sample |
| 1 | ≈ 1.8 m | ≈ 37.8 kN·m | sample |
| 1 | ≈ 1.95 m | ≈ 39.4875 kN·m | sample |
| 1 | ≈ 2.1 m | ≈ 40.95 kN·m | sample |
| 1 | ≈ 2.25 m | ≈ 42.1875 kN·m | sample |
| 1 | ≈ 2.4 m | ≈ 43.2 kN·m | sample |
| 1 | ≈ 2.55 m | ≈ 43.9875 kN·m | sample |
| 1 | ≈ 2.7 m | ≈ 44.55 kN·m | sample |
| 1 | ≈ 2.85 m | ≈ 44.8875 kN·m | sample |
| 1 | 3 m | 45 kN·m | stationary |
| 1 | ≈ 3.15 m | ≈ 44.8875 kN·m | sample |
| 1 | ≈ 3.3 m | ≈ 44.55 kN·m | sample |
| 1 | ≈ 3.45 m | ≈ 43.9875 kN·m | sample |
| 1 | ≈ 3.6 m | ≈ 43.2 kN·m | sample |
| 1 | ≈ 3.75 m | ≈ 42.1875 kN·m | sample |
| 1 | ≈ 3.9 m | ≈ 40.95 kN·m | sample |
| 1 | ≈ 4.05 m | ≈ 39.4875 kN·m | sample |
| 1 | ≈ 4.2 m | ≈ 37.8 kN·m | sample |
| 1 | ≈ 4.35 m | ≈ 35.8875 kN·m | sample |
| 1 | ≈ 4.5 m | ≈ 33.75 kN·m | sample |
| 1 | ≈ 4.65 m | ≈ 31.3875 kN·m | sample |
| 1 | ≈ 4.8 m | ≈ 28.8 kN·m | sample |
| 1 | ≈ 4.95 m | ≈ 25.9875 kN·m | sample |
| 1 | ≈ 5.1 m | ≈ 22.95 kN·m | sample |
| 1 | ≈ 5.25 m | ≈ 19.6875 kN·m | sample |
| 1 | ≈ 5.4 m | ≈ 16.2 kN·m | sample |
| 1 | ≈ 5.55 m | ≈ 12.4875 kN·m | sample |
| 1 | ≈ 5.7 m | ≈ 8.55 kN·m | sample |
| 1 | ≈ 5.85 m | ≈ 4.3875 kN·m | sample |
| 1 | 6 m | 0 kN·m | event |
Beam results and section ledger
Inspected position: 3 m · just right
| Section side | Shear force (V) | Bending moment (M) | Rotation / slope (θ) | Deflection (v) |
|---|---|---|---|---|
| Selected section | 0 kN | 45 kN·m | 0 mrad | ≈ 10.54688 mm |
All load and support events
| Position | Side | Shear force (V) | Bending moment (M) | Rotation / slope (θ) | Deflection (v) |
|---|---|---|---|---|---|
| Left · exterior closure | 0 kN | 0 kN·m | ≈ 5.625 mrad | 0 mm | |
| Right · interior | 30 kN | 0 kN·m | ≈ 5.625 mrad | 0 mm | |
| Left · interior | -30 kN | 0 kN·m | ≈ -5.625 mrad | 0 mm | |
| Right · exterior closure | 0 kN | 0 kN·m | ≈ -5.625 mrad | 0 mm |
Equilibrium and model assumptions
Force balance residual
0 kN
Moment balance residual
0 kN·m
Maximum |deflection| / length
≈ 0.001757813 1
Maximum absolute slope
≈ 5.625 mrad
These diagnostics describe the computed response. They do not establish that small rotations, slender-beam behavior or a structural capacity limit is satisfied.
Assumptions and numerical limits
- One straight, prismatic, statically determinate Euler–Bernoulli beam; constant entered E and I when enabled.
- Downward force, intensity and deflection are positive. Reactions are positive upward; applied and clamp couples are positive counterclockwise. Positive moment is sagging.
- Small rotations, linear elasticity and bilateral ideal supports are assumed; no stress, strength, buckling, shear-deformation or code check is performed.
- Self-weight is excluded unless explicitly entered as a distributed load. Exact arithmetic is conditional on entered values and unit definitions, not physical-property accuracy.
- Stationary locations and near-tied extrema use bounded numerical resolution independently of the display samples.
Static section fields use exact rational arithmetic for entered decimals. Stationary points use bounded numerical refinement; near ties and unresolved extrema are disclosed. Chart samples do not determine maxima.
Save and reuse this beam
The report includes signs, reactions, event sides, exact segment coefficients, extrema resolution and sampled sections. The input file preserves every load type’s stored values, including disabled rows and unfinished drafts.
Selectable report CSV
Prepare a report from the current valid plan. Editing the plan or selected section clears old report text.
Complete input import and selectable export
Import replaces the complete plan after structural validation. Spreadsheet-safe encoding preserves authored text exactly.
Model references: MIT beam equilibrium and compatibility, MIT beam displacements, and NIST unit definitions.
How to use this calculator
- Choose Support arrangement and Units, then enter Beam length. Simple supports sit at both ends; the cantilever is fixed at the left end. Changing Units preserves valid stored quantities or leaves the whole plan unchanged with an explanation.
- Add each load with Load name, Load type and Include load. Enter Position and Force or Applied couple, or Start position, End position and Uniform intensity. Positive forces act downward; positive couples act counterclockwise. Other load types keep their own stored values.
- Enable Calculate slope and deflection when you know the constant Young’s modulus E and Second moment of area I about the modeled bending axis. Stiffness is optional for reactions, shear and moment. The example stiffness values are illustrative, not a material or section recommendation.
- Choose a Response diagram and Inspect load, then use Section position and Section side or the event and critical-location selector. Read both physical sides of an interior jump; exterior closure is labeled separately and is not another beam section.
- Review support reactions, equilibrium residuals and extrema status alongside the section ledger. The model checks stationary candidates independently of drawing samples, preserves constant intervals and near-ties, and does not assert an unresolved peak as a solved maximum.
- Use Input format and Complete beam input to import a whole plan atomically. Copy the complete input for reuse, or download Complete report CSV with its matching selectable text. Invalid enabled stiffness keeps statics visible but disables the combined report until corrected or disabled.
The Formula
The mathematical logic powering this calculation is:
Position x increases from the left end. Downward point force P, uniform intensity q and displacement v are positive; external couples C and the clamp reaction couple are positive counterclockwise. Support forces are positive upward, and positive bending moment M is sagging.
Between concentrated events: dV/dx = −q, dM/dx = V, θ = dv/dx and EI d²v/dx² = −M. At a point force, V(x+) − V(x−) = −P; at an applied couple, M(x+) − M(x−) = −C.
For total downward force F, its moment J about the left end and total counterclockwise applied couple C: simple supports give R_B = (J − C)/L and R_A = F − R_B. A left clamp gives R_A = F and reaction couple C_A = J − C.
Simply supported boundaries are v(0) = v(L) = 0. A left clamp has v(0) = θ(0) = 0. An applied end couple can leave a nonzero moment just inside a simple support.
The model integrates exact piecewise polynomial coefficients in local coordinates, conditional on the entered values. Extrema use physical one-sided endpoints, constant intervals and stationary candidates independently of drawing samples. Approximate roots, tied candidates and unresolved extrema retain their stated numerical status; exact arithmetic does not establish physical accuracy.Worked Example
If you input:
- Support arrangement: Simply supported · both ends
- Units: SI · metres and kilonewtons
- Beam length: 6 m
- Load type: Uniform load
- Start position: 0 m
- End position: 6 m
- Uniform intensity: 10 kN/m downward
- Calculate slope and deflection: Enabled
- Young’s modulus E: 200 GPa (illustrative)
- Second moment of area I: 8000 cm⁴ (illustrative)
Result:
Both upward support reactions are 30 kN. The largest bending moment is 45 kN·m at the midpoint, 3 m from the left end. With the entered illustrative stiffness, the largest downward deflection is 10.546875 mm at the midpoint; the endpoint slopes are +5.625 and −5.625 mrad. Equilibrium residuals are zero. These results describe the stated idealized beam, not a strength or building-code check.
Frequently Asked Questions
Which beams and loads can this calculator model?
It models one straight prismatic beam with ideal simple supports at its ends or a clamp at the left end. Up to 24 rows can contain signed point forces, applied in-plane couples or uniform loads over partial intervals. Overlaps, coincident events, zero loads and an unloaded span are supported. Self-weight is included only when you enter it. Intermediate supports, overhangs, internal hinges, varying stiffness, axial response and torsion are outside this model.
Do I need Young’s modulus and the second moment of area?
Reactions, shear and moment for these statically determinate supports do not require E or I. Enable stiffness to calculate slope and deflection, using positive constant values for the modeled bending axis. I is an area second moment, not mass moment of inertia. Invalid enabled stiffness clears deformation results while preserving valid statics and blocks the combined report. Disabling it keeps the stored values and permits a clearly identified statics-only report.
What do the positive signs and reaction directions mean?
Positions increase left to right. Point forces, distributed intensity and deflection are positive downward; support force reactions are positive upward. Applied couples and the clamp reaction couple are positive counterclockwise. Positive bending moment is sagging, while positive slope descends to the right. A negative simple-support reaction is retained with an ideal bilateral-restraint warning: this calculation does not model contact loss or lift-off. Check these conventions before comparing a source that uses different signs.
Why can the same position have two shear or moment values?
They are the limits just to the left and just to the right of a concentrated event. A downward force P changes shear by −P, and a counterclockwise couple C changes moment by −C. The tool does not average those jumps or draw them as a sloping physical segment. Slope and deflection stay continuous because no hinge is modeled. At an endpoint the selectable section is the physical interior; zero exterior resultants are closure bookkeeping.
How are loads at supports and overlapping intervals handled?
Endpoint loads remain at their entered positions. Their contributions combine with the support action while their individual rows remain available in the event ledger. A force or couple applied exactly at a clamp changes its reaction without deforming the span by itself. A couple at a simple support can produce a nonzero interior end moment, despite the free rotation. Partial uniform loads may overlap; their signed intensities add over the shared interval.
Are analytical extrema exact, and what happens at a numerical limit?
Reactions, polynomial coefficients and rational section evaluations use exact arithmetic conditional on the entered decimals and unit definitions. The peak search also evaluates both physical event sides, constant intervals and roots of the response derivative. Stationary locations can be approximate; near-tied candidates retain a resolution label instead of claiming exact equality. If all relevant stationary locations cannot be resolved within the bounded method, the global peak is unavailable while valid sections remain inspectable. Drawing samples never determine the reported maximum.
What are the input limits and engineering limitations?
Authored values use decimal or scientific notation with at most 64 characters, 24 significant digits and 24 effective fractional places. In SI terms, length is 10⁻⁶ to 10⁶ m, enabled E is 1 to 10¹⁵ Pa, and enabled I is 10⁻²⁴ to 10¹² m⁴; force, couple and intensity magnitudes are limited to 10¹² N, 10¹⁵ N·m and 10¹² N/m. Positions must lie on the beam and a uniform interval must have positive length. These are numerical limits, not design advice. The linear-elastic, small-rotation Euler–Bernoulli model omits shear deformation, buckling, yielding, connections, dynamic effects and code checks. A valid result does not establish that a member is adequate.
Similar Calculators
Vector Calculator
Explore 2D and 3D vectors: dot and cross products, angles, addition, projections and area, with interactive geometry, exact arithmetic and CSV.
Triangle Calculator
Solve right or oblique triangles from sides and angles. Compare both SSA solutions, inspect scaled geometry, and export sides, angles, area and heights.
Roof Area Calculator
Plan shed, gable and hip roof area, faces and edges. Compare roofing, underlayment, starter and cap quantities with exact whole-pack purchasing, diagrams and CSV.
