True Airspeed Calculator & Density Altitude

Enter calibrated airspeed, pressure altitude and static outside air temperature for two flight conditions. Compare the effects of pressure, temperature and compressibility on true airspeed, equivalent airspeed and density altitude. The altitude chart shows how each case changes as pressure altitude varies at its entered temperature offset.

Flight conditions

Compare two true airspeeds

Separate the effects of static pressure, air temperature and compressibility on modeled subsonic speed.

Measurement units

Case B is 5.29 kt faster through the air.

Case A results

True airspeed
140.78 kt
125 kt CAS at 8,000 ft
Equivalent airspeed
124.81 kt
Mach
0.2189
Density altitude
8,000 ft
ISA temperature offset
0 °C

Case B results

True airspeed
146.07 kt
125 kt CAS at 8,000 ft
Equivalent airspeed
124.81 kt
Mach
0.2189
Density altitude
10,362.1 ft
ISA temperature offset
+20.85 °C

Case A conditions

Case B conditions

True airspeed by pressure altitude

Each line holds its calibrated airspeed and ISA temperature offset fixed.

  • Case A solid
  • Case B dashed
Pressure-altitude sweep of modeled true airspeedCase A, 8,000 ft, 140.78 kt. Case B, 8,000 ft, 146.07 kt.255.50-2K36.1K

Horizontal axis is pressure altitude (ft). Vertical axis is airspeed (kt). Circles show the entered conditions.

Airspeed and atmosphere ledger

Open airspeed and atmosphere worksheet
QuantityCase ACase B
Calibrated airspeed125 kt125 kt
Pressure altitude8,000 ft8,000 ft
Outside air temperature-0.85 °C20 °C
Standard temperature-0.85 °C-0.85 °C
Static pressure75,262.4 Pa75,262.4 Pa
Impact pressure2,555.5 Pa2,555.5 Pa
Air density0.9629 kg/m³0.8944 kg/m³
Density altitude8,000 ft10,362.1 ft
True airspeed140.78 kt146.07 kt
Equivalent airspeed124.81 kt124.81 kt
Incompressible estimate140.99 kt146.29 kt
Mach0.21890.2189
Download airspeed comparison CSV
Show selectable CSV

How to use this calculator

  1. Choose speed, altitude and temperature units. Unit switches preserve the physical quantities in both cases.
  2. Enter calibrated airspeed, pressure altitude and static outside air temperature for Case A and Case B. Use prepared CAS and pressure altitude values.
  3. Compare true airspeed, equivalent airspeed and Mach. Read the ISA temperature offset, static pressure and density altitude in each case.
  4. Check the pressure-altitude sweep. Toggle the incompressible estimate to compare the two methods at the same modeled condition.
  5. Open the conditions ledger or download the CSV for the pressure calculations, exact inputs and sampled chart values.

The Formula

The mathematical logic powering this calculation is:

Convert calibrated airspeed (CAS), geopotential pressure altitude h and outside air temperature to m/s, metres and kelvin. Standard troposphere temperature is Tstd = 288.15 − 0.0065h K. Static pressure is p = 101325 × (Tstd / 288.15)^(g/(R × 0.0065)), with g = 9.80665 m/s² and R = 287.05287 J/(kg·K). Dry-air density is ρ = p/(RT), with entered static temperature T. Each case estimates the standard-atmosphere altitude that has that density, using the lapse-rate layer through 11,000 m and the first isothermal layer through 20,000 m. The lapse-rate expression extends below sea level down to −2,000 m for this comparison.

Use the sea-level reference speed of sound a0 = √(γR × 288.15) with γ = 1.4. Impact pressure is qc = 101325 × [(1 + 0.2(CAS/a0)²)^3.5 − 1]. Infer Mach from M = √{5[(1 + qc/p)^(2/7) − 1]}. This is the isentropic subsonic relation. At or above Mach 1 it stops the speed calculation and keeps the separate pressure and density results visible.

True airspeed (TAS) is M√(γRT). Equivalent airspeed is TAS × √(ρ/ρ0), where ρ0 uses standard sea-level pressure and temperature. The separately labeled incompressible estimate uses CAS × √(ρ0/ρ). Comparing the two shows the effect of treating CAS as if it already represented the same dynamic pressure at sea level. Pressure and CAS fix Mach and equivalent airspeed in this dry-air model. A change in temperature at the same pressure changes true airspeed and density altitude.

The altitude chart holds each case's CAS and the difference between its entered temperature and standard temperature fixed. It samples the resulting speed and can show the sonic boundary. The worksheet exports those samples and the case values. Exact fractions in the output preserve the entered physical quantities across unit choices.

Enter CAS from 0 through 500 knots or its equivalent, pressure altitude from −610 through 11,000 m or its equivalent, and temperatures from 170 through 350 K. The model uses dry air and constant R and γ. It models subsonic speed from already calibrated data. Groundspeed, wind, humidity, instrument or probe corrections, shock behavior and aircraft operating limits require separate information.

Worked Example

If you input:

  • Calibrated airspeed (kt): 125 kt in both cases
  • Pressure altitude (ft): 8,000 ft in both cases
  • Outside air temperature (°C): Case A −0.8496 °C. Case B 20 °C.

Result:

Both cases give Mach 0.2189 and 124.81 kt equivalent airspeed. Warmer air increases modeled true airspeed from 140.78 kt to 146.07 kt. Density altitude changes from 8,000 ft at standard temperature to 10,362.1 ft in the warm case.

Frequently Asked Questions

How do I get calibrated airspeed?

CAS is indicated airspeed corrected for instrument and position error. Use calibration data for the aircraft or an already prepared CAS value. The worksheet starts from CAS.

Why do Mach and equivalent airspeed stay the same in the warm example?

With the same CAS and static pressure, the impact-to-static pressure ratio stays fixed. This fixes Mach. Equivalent airspeed depends on Mach and static pressure in the dry-air model, while true airspeed also depends on temperature.

What is the difference between pressure altitude and density altitude?

Pressure altitude is the altitude with that static pressure in the standard atmosphere. Density altitude is the standard-atmosphere altitude with the calculated actual density. At standard temperature the two agree within this model's ranges.

When does the incompressible estimate differ most?

The two methods are close at small Mach numbers. As the pressure ratio increases, air compression contributes more to pitot impact pressure. Compare the plotted lines to see the difference under your entered assumptions.

What happens at the sonic boundary?

The worksheet marks the boundary where the isentropic relation reaches Mach 1. The speed result and speed curve stop there. Static pressure, temperature and dry-air density still have the same meaning in the entered atmosphere.

Are chart times or wind included?

The sweep varies pressure altitude, holding each case's calibrated airspeed and temperature offset from ISA fixed. True airspeed describes movement relative to the air. Groundspeed also depends on the wind.

Similar Calculators