LTL Freight Quote & Weight Break Calculator

Compare the cost of shipping a pallet or another oversized item using rates or spot quotes you already have. See when an eligible higher billed weight lowers linehaul and how liftgate, residential delivery, minimum charges and fuel affect the total. Hold the lane and class constant to explore which costs change with weight.

U.S. domestic LTL

Compare freight quotes and weight breaks

Use your carrier’s rates or spot quote to compare billed weight, linehaul and pickup or delivery fees.

All-in freight quote comparison

Quote A total
$567.40
500 billed lb
Quote B total
$535.00
Entered spot base and any separate charges

Quote B is $32.40 less for this shipment.

Linehaul, services and fuel

Quote A

  • Linehaul or spot base $340.00
  • Added services $133.20
  • Calculated fuel $94.20

Quote B

  • Linehaul or spot base $535.00
  • Added services $0.00
  • Calculated fuel As quoted

Shipment and chart weights

Edit Quote A terms

Hundredweight rates

Base tier
Tier 2

Pickup and delivery services

Service 1
Service 2
Edit Quote B terms

Enter the quoted amount, including any fuel already inside it. List only separate charges as added fees.

Pickup and delivery services

Service 1
Service 2
Quote totals by shipment weight

Lines connect sampled scale weights. Vertical scale $0.00 to $831.90. A spot base is held fixed while the shipment weight changes.

  • Quote A
  • Quote B
Freight quote totals across sampled scale weightsCompare 66 sample weights from 250 to 750 pounds. The ledger gives both exact quote amounts at each sample and flags weights beyond a quote’s limit.
250 lbSelected 490 lb750 lb

Rate and service audit

Open freight quote ledger

Quote A ledger

490 lb at the ordinary rate. 10 lb of deficit weight reduces linehaul by $52.00.

An eligible higher rate break first costs less at 426 ordinary billed lb in this tier.

Quote A alternative billed weights
PoundsRate per 100 lbAfter discountWith minimumSelected
490$100.00$392.00$392.00
500$85.00$340.00$340.00Yes
Quote A pickup and delivery charges
ServiceTreatmentAdded chargeFuel eligible
LiftgateRate per 100 lb$88.20Yes
Residential deliveryFlat USD fee$45.00No

$428.20 fuel base and $94.20 fuel surcharge.

Quote B ledger

Quote B pickup and delivery charges
ServiceTreatmentAdded chargeFuel eligible
LiftgateIncluded in quote$0.00As quoted
Residential deliveryIncluded in quote$0.00As quoted
Open weight sample ledger
Sampled scale weights and both freight quotes
Scale weightQuote AQuote B
250 lb$417.10$535.00
258 lb$417.10$535.00
267 lb$417.10$535.00
275 lb$417.10$535.00
283 lb$424.91$535.00
292 lb$433.69$535.00
300 lb$441.50$535.00
308 lb$449.31$535.00
317 lb$458.09$535.00
325 lb$465.90$535.00
333 lb$473.71$535.00
342 lb$482.49$535.00
350 lb$490.30$535.00
358 lb$498.11$535.00
367 lb$506.89$535.00
375 lb$514.70$535.00
383 lb$522.51$535.00
392 lb$531.29$535.00
400 lb$539.10$535.00
408 lb$546.91$535.00
417 lb$555.69$535.00
425 lb$563.50$535.00
425.001 lb$563.50$535.00
426 lb$563.50$535.00
433 lb$563.50$535.00
442 lb$563.50$535.00
450 lb$563.50$535.00
458 lb$563.50$535.00
467 lb$563.50$535.00
475 lb$564.11$535.00
483 lb$565.87$535.00
490 lb$567.40$535.00
492 lb$567.84$535.00
499 lb$569.38$535.00
499.001 lb$569.38$535.00
500 lb$569.60$535.00
508 lb$577.99$535.00
517 lb$587.44$535.00
525 lb$595.83$535.00
533 lb$604.22$535.00
542 lb$613.67$535.00
550 lb$622.06$535.00
558 lb$630.45$535.00
567 lb$639.90$535.00
575 lb$648.29$535.00
583 lb$656.68$535.00
592 lb$666.13$535.00
600 lb$674.52$535.00
608 lb$682.91$535.00
617 lb$692.36$535.00
625 lb$700.75$535.00
633 lb$709.14$535.00
642 lb$718.59$535.00
650 lb$726.98$535.00
658 lb$735.37$535.00
667 lb$744.82$535.00
675 lb$753.21$535.00
683 lb$761.60$535.00
692 lb$771.05$535.00
700 lb$779.44$535.00
708 lb$787.83$535.00
717 lb$797.28$535.00
725 lb$805.67$535.00
733 lb$814.06$535.00
742 lb$823.51$535.00
750 lb$831.90$535.00
Download freight quote CSV
View CSV text

How to use this calculator

  1. Enter the total scale weight including packaging and choose the chart bounds in whole pounds.
  2. Choose a rated tariff or entered spot quote for each option. Use one lane and freight class from each quote.
  3. For a tariff, enter the billing increment, tier rates, eligible deficit breaks, discount and any linehaul minimum.
  4. Enter service amounts or mark them included. For a tariff, select which added services enter its fuel base.
  5. Compare the full invoice estimate, inspect the alternative billed weights, and download the rate, service and sweep ledger.

The Formula

The mathematical logic powering this calculation is:

Use one prepared lane and freight class per tariff. Enter the gross scale weight in pounds. For a tariff, round it upward to the entered freight billing increment. Use the tier starting at the largest minimum weight that the rounded weight reaches. A tier’s rate applies to the whole billed weight in hundredweight (100 lb). The base charge is billed pounds × the quoted rate ÷ 100, multiplied by one minus the entered discount. Round to cents, half up, then apply the entered post-discount minimum.

If a higher tier is marked eligible for deficit rating, also evaluate its minimum billed weight at its quoted rate. Use the lowest linehaul after the discount and minimum, preferring the smaller billed weight on a tie. Deficit weight is the selected billed weight less the initial rounded weight. The displayed break threshold is the earliest billed increment in the active tier where an eligible alternative costs strictly less. A rated quote is unavailable if ordinary rounded weight exceeds its entered billed limit.

A flat service charge adds its entered amount. A rate per 100 lb uses the actual scale weight, rounds to cents, and applies its entered minimum and optional maximum. Services marked included add zero to the entered tariff or spot amount. Fuel on a rated quote applies to the selected linehaul and the additional services explicitly marked fuel eligible. Round fuel once to cents. Add linehaul, added services and fuel. A spot quote starts with the entered amount and adds only separately entered charges. Include any separate spot fuel amount as a flat charge when applicable.

The chart holds the lane, entered class and quote terms fixed. It calculates bounded sample weights and includes neighboring quoted breakpoints. A spot subtotal stays fixed while any separate per-100-lb fee continues to vary. Confirm a changed shipment with the carrier. This worksheet covers quoted domestic LTL terms in USD. It leaves freight classification, live pricing, capacity minimums, taxes, carrier adjustments and marketplace settlement to the applicable service.

Worked Example

If you input:

  • Actual scale weight (lb): 490
  • Quote A tariff: $100/cwt below 500 lb, then $85/cwt from 500 lb with deficit rating allowed. Bill whole pounds and apply a 20% discount and $220 minimum.
  • Quote A service and fuel: $18/cwt liftgate with an $85 minimum and $230 maximum, $45 residential delivery, and 22% fuel on linehaul plus liftgate.
  • Quote B spot base (USD): $535, with liftgate, residential service and fuel included.

Result:

Quote A bills 500 lb. The higher tier lowers linehaul from $392.00 to $340.00. Liftgate is $88.20 and fuel is $94.20. With residential delivery, A totals $567.40. Quote B totals $535.00 and saves $32.40.

Frequently Asked Questions

Can billing a higher weight cost less?

Yes, when the agreement permits an eligible weight break with a sufficiently lower rate per 100 lb. The scale weight stays the same. Compare the carrier’s permitted candidates and check the billed quantity and linehaul in the ledger.

Do you fetch eBay or carrier freight prices?

Enter the carrier’s prepared retail or contracted terms and the actual shipment weight. The calculator compares those amounts and can help work out costs for an oversized marketplace sale.

Which amount should I enter for a spot quote?

Use the received quote amount along with the list of services it covers. Add charges separately when the carrier excluded them from that amount.

How is a liftgate or residential delivery charge handled?

Use the carrier’s quoted amount or per-100-lb rule with its minimum and maximum. Choose fuel eligibility only when the tariff requires it. This model uses the actual scale weight for separately entered per-100-lb services.

Why does a chart stop before the selected maximum?

A tariff can cover a smaller range than the chart. Samples beyond its quoted billed weight limit remain unavailable. Adjust the chart bounds or confirm a separate quote for heavier weights.

Does the worksheet determine freight class or added handling requirements?

Use the carrier-confirmed class and lane. Class, density, trailer capacity, reweigh corrections and additional service rules can affect the invoice and need separate confirmation.

Similar Calculators