Impervious Surface Coverage Calculator

Plan surface coverage on a rectangular parcel with an equally scaled footprint map, up to four alternative layouts and an exact surface ledger. Enter the percentage counted for each surface and the unassigned remainder, then compare the result with your own coverage limit. This is coverage accounting, not a runoff model or permit determination.

Surface coverage planner

See how your surfaces add up

Compare parcel layouts, counted coverage and room for change. Your local counting rules and limit stay explicit.

Illustrative assumptions, not local regulations. Counted percentage is an area-accounting weight, not a runoff coefficient. A limit result does not establish permit compliance.

Compare counted coverage

Common scale 0–100% of parcel area. Dashed line: your 40% limit. Select a layout to inspect its map and ledger.

31.6667% counted · Below entered limit · signed headroom 50 m²

33.3333% counted · Below entered limit · signed headroom 40 m²

Counted area
190 m²
31.6667% of the parcel
Signed headroom
50 m²
Limit area 240 m². Negative means above your entered limit.
Unassigned remainder
400 m²
0% counted; contributes 0 m².
Change from first scenario
0 m²
Positive means more counted area than the first layout.

Parcel surface map

20 m wide × 30 m deep. One scale on both axes. Hatched rectangles are assigned surfaces; their full footprint is shown regardless of counted percentage.

Parcel footprint for Half-counted patio; 3 assigned surfaces. Exact measurements appear in the surface ledger.

Selected: House footprint. Counted area 120 m² from footprint 120 m². Small features may be indistinguishable at this scale. Use the ledger for exact data.

Remainder replacement budget

Feasible aggregate replacement area: 0 m² to 50 m², inclusive.

Changes only the remainder from 0% counted to 100% counted. A positive lower endpoint is the minimum area that must change. An interval from zero to zero allows no positive replacement. This is an area budget, not proof that a contiguous shape fits or that a project is permitted.

Surface ledger

Assigned rectangular surfaces. Positions and sides in m; areas in m².
SurfaceStart x / yWidth × depthFootprintCounted %Counted areaInspect
House footprint0 / 010 × 12120 m²100%120 m²
Driveway10 / 05 × 1260 m²100%60 m²
Patio0 / 125 × 420 m²50%10 m²

Unassigned remainder: 400 m² · counted 0 m². Total parcel: 600 m².

Save the full comparison

CSV includes all scenarios, authored units and exact rational m² results. Import fraction fields as text to preserve precision.

How to use this calculator

  1. Load Patio comparison example or Reduce coverage example. Open Edit parcel and surfaces, choose Display units and enter Parcel width / x and Parcel depth / y.
  2. Enter the Counted coverage limit and New remainder surface counted percentage. Obtain the relevant counting definitions and limit for your intended assessment; the examples are assumptions only.
  3. Name each scenario and explicitly set Unassigned remainder counted percentage. Add surfaces with Start x, Start y, Surface width, Surface depth and Surface counted percentage. Keep rectangles inside the parcel and split any overlapping footprints into separate regions.
  4. Copy a scenario to compare a different layout or material-counting assumption. Use Update coverage to validate all layouts. Correct linked errors before comparing results or exporting.
  5. Select a scenario, inspect the map and surface ledger, and read signed headroom and change from the first scenario. The replacement range changes only unassigned remainder, with both endpoints included.
  6. Download surface CSV or use Show selectable CSV to save all inputs, assumptions and exact results. Import fractions as text. Confirm actual survey dimensions, local counting rules and project requirements separately.

The Formula

The mathematical logic powering this calculation is:

Parcel area P = width × depth. Each nonoverlapping rectangle has footprint Aᵢ = widthᵢ × depthᵢ and counted area Iᵢ = Aᵢ × countedPercentᵢ/100. Unassigned remainder B = P − ΣAᵢ. With remainder counted percentage r, total counted area W = ΣIᵢ + Br/100. Coverage = 100W/P. Allowed area C = P × entered limit/100. Signed headroom H = C − W; a negative value means above your entered limit.
For replacement taken only from the unassigned remainder, let n be the new counted percentage and d = (n−r)/100. Feasible replacement area A satisfies W + dA ≤ C and 0 ≤ A ≤ B. For d > 0, feasibility requires H ≥ 0 and A ≤ min(B,H/d). For d = 0, all of [0,B] is feasible if H ≥ 0; otherwise none is. For d < 0, the minimum is max(0,H/d); the interval exists only if that minimum is no greater than B. Closed endpoints are included. A [0,0] interval differs from an infeasible result.
All areas and comparisons use exact rational arithmetic. One foot is exactly 0.3048 m; displayed converted values are rounded while authored quantities are retained. CSV stores exact rational square metres. Rectangles must fit within the parcel and may touch but cannot overlap internally. The map shows full physical footprints rather than shrinking rectangles by their counted percentages.
Bounds: one to four scenarios, zero to forty rectangles per scenario; positive parcel and rectangle sides, nonnegative positions, all at most 10,000 m. Metre inputs allow six decimal places and feet five; percentages allow four decimal places within 0–100. Labels allow 80 characters. Required blanks, malformed decimals and invalid geometry keep results unavailable.
The replacement interval is an aggregate area budget, not proof of a contiguous fit, setbacks, zoning eligibility or construction feasibility. No rainfall, infiltration, runoff coefficient, drainage capacity, survey accuracy or automatic jurisdictional rules are modeled. A permeable material is not automatically counted as zero: use the applicable rule for the specific coverage measure you are assessing.

Worked Example

If you input:

  • Parcel: 20 m × 30 m; entered coverage limit 40%.
  • Assigned surfaces: House 10 × 12 m and driveway 5 × 12 m counted 100%; patio 5 × 4 m counted 50% or 100%.
  • Remainder: 400 m² counted 0%; proposed replacement counted 100%.

Result:

The parcel is 600 m², so the entered 40% limit allows 240 m² counted area. House and driveway contribute 180 m². At 50% counted, the 20 m² patio contributes 10 m²: total 190 m², coverage 31.6667%, and headroom 50 m². Counting the patio fully raises the total to 200 m², coverage 33.3333%, and leaves 40 m² headroom. Up to 50 m² or 40 m² of the respective unassigned remainder can change from 0% to 100% counted. This does not establish that a contiguous addition fits.

Frequently Asked Questions

Is impervious coverage the same as building or hard-surface coverage?

Not necessarily. Local definitions can distinguish building footprints, impervious surfaces and hard surfaces. Bellevue's guidance, for example, includes permeable paving in hard surfaces. This calculator applies your entered weights to one chosen coverage measure; it does not decide which rule applies.

What percentage should I enter for permeable paving?

Use the counting rule applicable to your project and chosen coverage measure. Do not infer a percentage from a product's permeability or assume permeable paving counts as zero. The example's 50% patio weight is an illustrative assumption, not a recommendation or local rule.

Does this predict stormwater runoff?

No. Counted percentages are area-accounting weights. Runoff depends on rainfall, soil, infiltration, drainage connectivity and other conditions not modeled here. The EPA background source explains the broader relationship; this tool does not implement an EPA runoff model.

Can I use an irregular parcel or overlapping shapes?

This version supports a rectangular parcel and disjoint axis-aligned rectangular surface regions. Edges may touch; interior overlap is rejected to prevent double counting. Split an L-shaped surface into disjoint rectangles. Use Polygon Area for irregular coordinate-based area measurements, but do not substitute a bounding rectangle as though it were an irregular parcel's actual area.

Why might the replacement interval have a positive minimum?

When a scenario is above your entered limit, a lower-counted replacement may need to cover a minimum amount of the remainder before the plan meets that limit. For 100 m² counted at 80%, a 50% limit and a replacement counted at 20%, at least 50 m² must change. If even replacing all the remainder is insufficient, the result is infeasible.

Does the remaining area budget guarantee room for a patio?

No. It is an aggregate coverage budget. It does not assess contiguous fit, setbacks, access, easements, drainage or permit eligibility. Draw a proposed surface in a copied scenario to test its rectangular footprint and coverage, then assess those other constraints separately.

Do unit changes alter my measurements?

Changing display units retains each authored measurement exactly. Converted fields show rounded equivalents; editing one authors that field in the newly selected unit. Exact m² results remain in the CSV. Very small nonzero values use extra display precision or exact fractions rather than appearing as zero.

Why do results disappear after editing?

The previous result would describe different inputs. Update coverage validates the current draft before showing dependent results or offering CSV. Blank required dimensions stay incomplete, and new surfaces start with blank sizes instead of arbitrary solved geometry.

Similar Calculators