Grass Seed & Purchase Planner
Plan a grass-seed purchase across multiple lawn areas and competing seed lots. Enter your application rates on either a pure live seed (PLS) basis or a bulk-product basis, then compare up to four offers with their own bag sizes, prices and seed-label components. Separate seed to apply from purchase reserve and surplus created by whole bags. Weight and cost comparisons, seed-label composition charts, exact zone ledgers and a complete CSV use the same calculation. Examples are illustrative; choose rates and species suitable for your site using product and local guidance. The planner does not predict germination in the field or recommend a species, season or spreader setting.
Read the label. Plan the bags.
Compare seed lots against your lawn zones. Separate application need, extra stock and whole-bag surplus before comparing costs.
7,000 ft². Seed lot A: 2 bags, USD 170; apply 44.44 lb bulk seed.
Edit zones, seed labels and offers
Use measured lawn areas and rates appropriate to your chosen seed and site. The examples are illustrative. Label germination is a laboratory measure, not a prediction of field establishment. This planner does not select species or recommend seeding rates.
Lawn zones and application rates
Enter nonoverlapping measured turf areas, excluding beds and paving. Use separate zones for supplied rates such as establishment or overseeding. The planner does not infer geometry or remove overlaps.
Seed lots and bag offers
Compare products suitable for the intended use. Lowest entered cost does not establish equivalent species, seed counts, field performance or suitability. Copy each component’s purity and germination from the lot label.
Up to 80 characters. Include a lot reference if useful; no product data is fetched.
Positive, up to 1,000,000 lb; up to six decimals. Use total package weight, not PLS weight.
Nonnegative, up to 1,000,000,000; up to six decimals. No tax or discount is inferred.
Nonnegative, up to 1,000,000,000; up to six decimals. Charged once only if at least one bag is purchased.
Purity is the component’s percent of the whole bag by weight. Listed purity totals must not exceed 100%. Remaining mass is left unclassified. The lot must have a positive total PLS fraction.
Up to 80 characters, matching the seed label.
From 0 to 100, up to six decimals. This is not the percentage within only the pure-seed portion.
From 0 to 100, up to six decimals. Use the current lot’s laboratory label value. Hard or dormant seed treatment is not inferred.
From lawn target to whole bags
Rate basis: pure live seed (PLS). Measured area: 7,000 ft². Each offer supplies the same entered PLS target using its own label fraction.
Lowest entered total: Seed lot A. This compares supplied prices and quantities, not species suitability, seed counts or field performance. Purchase reserve is not an instruction to increase the application rate.
Application, reserve and bag surplus
All bars share a 0–60 lb bulk-weight scale. Solid = application; diagonal stripes = purchase reserve; vertical stripes = package surplus. Exact weights appear beneath every bar.
Seed lot A · 2 bags / 50 lb
- Apply: 44.44 lb
- Reserve: 4.44 lb
- Bag surplus: 1.11 lb
PLS to apply: 32 lb.
Seed lot B · 3 bags / 60 lb
- Apply: 37.43 lb
- Reserve: 3.74 lb
- Bag surplus: 18.83 lb
PLS to apply: 32 lb.
Complete purchase cost
Shared 0–USD 210 scale. Includes whole bags and entered delivery; no additional tax or labor is inferred.
Seed lot A: USD 170
Bag price per PLS pound: USD 4.44. Excludes delivery and whole-bag overbuy.
Seed lot B: USD 210
Bag price per PLS pound: USD 4.09. Excludes delivery and whole-bag overbuy.
What the label contributes
Each bar represents 100% of bulk bag weight. Solid segments follow the numbered component list and show each component’s PLS contribution. Diagonal stripes are listed seed outside the germinating fraction; vertical stripes are unlisted mass. Laboratory germination is not guaranteed field establishment, and unlisted mass is not identified as weeds or inert material.
Seed lot A · 72% PLS
- Listed component: purity 90% × germination 80% = 72% of bag weight as PLS.
Listed non-germinating fraction: 18%. Unlisted mass: 10%.
Seed lot B · 85.5% PLS
- Listed component: purity 95% × germination 90% = 85.5% of bag weight as PLS.
Listed non-germinating fraction: 9.5%. Unlisted mass: 5%.
Exact purchase comparison
Weights are pounds; prices use USD. Fractions preserve calculation precision, not field prediction accuracy.
| Seed lot | PLS % | Apply bulk | Apply PLS | Reserve | Required bulk | Bags | Purchased bulk | Bag surplus | Total cost |
|---|---|---|---|---|---|---|---|---|---|
| Seed lot A | 72 | 400/9 | 32 | 40/9 | 440/9 | 2 | 50 | 10/9 | 170 |
| Seed lot B | 171/2 | 6400/171 | 32 | 640/171 | 7040/171 | 3 | 60 | 3220/171 | 210 |
Zone application ledger · Seed lot A
These quantities exclude purchase reserve and bag surplus. Verify the supplied rates for the selected product and site before applying seed.
| Zone | Area (ft²) | Entered target (lb) | Bulk to apply (lb) | PLS to apply (lb) | Bulk rate (lb/1,000 ft²) | PLS rate (lb/1,000 ft²) |
|---|---|---|---|---|---|---|
| Front lawn | 5000 | 20 | 250/9 | 20 | 50/9 | 4 |
| Repair area | 2000 | 12 | 50/3 | 12 | 25/3 | 6 |
Save every lot and zone
Export every input, seed-label contribution, zone quantity, purchase result and chart value. The selected seed lot does not limit the export.
How to use this calculator
- Open Edit zones, seed labels and offers. Choose PLS target rates or bulk-product rates before entering your zone rates. Changing basis clears rates so they are not silently reinterpreted.
- Enter each non-overlapping lawn zone’s area in square feet and its appropriate pounds per 1,000 square feet. Rates are supplied by you; use explicit zero for a zone receiving no seed.
- For each offer, enter bag weight, bag price, delivery and the purity and germination percentages for each listed seed component. Purity refers to the entire bag by weight.
- Set purchase reserve and inspect a seed lot. Compare application needs, total bags, delivered cost and leftover seed; the lowest price does not establish product suitability.
- Review label composition, the exact purchase comparison and zone application ledger. Download grass seed CSV or Show CSV text to save every offer and zone.
The Formula
The mathematical logic powering this calculation is:
For each seed-label component, PLS fraction = (purity percent / 100) × (germination percent / 100). Purity is a share of the entire bag by weight, not a share normalized across listed components. Add component PLS fractions to obtain lot fraction q. Listed non-germinating fraction = total listed purity fraction − q. Remaining unlisted mass = 1 − total listed purity fraction; its composition is not inferred.
For a zone with area A in ft² and entered rate r in pounds per 1,000 ft², entered target = A × r / 1000. In PLS mode, PLS to apply = target and bulk seed to apply = target / q. In bulk mode, bulk seed to apply = target and PLS to apply = target × q. A product rate already stated as bulk seed must not receive another PLS correction.
Sum bulk application across zones separately for each offer. Purchase reserve = summed bulk application × reserve percent / 100. Required bulk = application + reserve. Whole bags = ceiling(required bulk / bag weight), rounded once for the combined purchase. Purchased bulk = bags × bag weight. Bag surplus = purchased bulk − required bulk. Left after application = reserve + bag surplus. Neither reserve nor bag surplus increases the application rate.
Total purchase cost = bags × bag price + entered delivery, with delivery included only when at least one bag is needed. Bag price per PLS pound = bag price / (bag weight × q); this unit-price comparison excludes delivery and whole-bag overbuy. Lowest entered total identifies all tied minima, not the most suitable product.
Supported input: 1–20 zones, 1–4 offers, 1–8 label components per offer. Zone area is positive up to 1000000000 ft²; rates are 0–1000 lb per 1000 ft². Reserve is 0–100%. Bag weight is positive up to 1000000 lb; bag price and delivery are 0–1000000000 in one entered currency. Purity and germination are 0–100%; total purity cannot exceed 100%, and total PLS must be positive. Plain decimal inputs accept at most six decimal places. Exact rational arithmetic preserves values through the final whole-bag ceiling. Displayed decimals are rounded; exact ledgers and CSV retain fractions. No tax, labor, area overlap correction, hard/dormant-seed adjustment, seed-count comparison or field-emergence prediction is inferred.Worked Example
If you input:
- Rate basis and reserve: Pure live seed targets; 10% purchase reserve; USD
- Lawn zones: Front lawn: 5000 ft² at 4 lb PLS/1000 ft²; repair area: 2000 ft² at 6 lb PLS/1000 ft²
- Seed lot A: 25 lb bag; USD 80 per bag; USD 10 delivery; 90% purity and 80% germination
- Seed lot B: 20 lb bag; USD 70 per bag; no delivery charge; 95% purity and 90% germination
Result:
The zones total 7000 ft² and require 32 lb PLS. Lot A has 72% PLS: apply 400/9 lb bulk (about 44.44), add 40/9 lb purchase reserve, and buy 2 bags totaling 50 lb for USD 170. Bag surplus is 10/9 lb; 50/9 lb remains after application. Lot B has 85.5% PLS and needs 7040/171 lb including reserve (about 41.17); buy 3 bags totaling 60 lb for USD 210. Lot A has the lower entered purchase cost. These illustrative rates and prices are not a product recommendation.
Frequently Asked Questions
What is pure live seed?
PLS is the seed-label estimate obtained by multiplying each component’s purity fraction by its germination fraction and adding the results. For example, 90% purity and 80% germination gives 72% PLS by bulk weight. Laboratory germination does not guarantee field establishment.
Should I choose PLS rates or bulk rates?
Use the basis stated by your rate source. PLS targets are divided by the lot’s PLS fraction to find bulk application. Bulk-product rates are applied directly. Do not apply another PLS correction to an already adjusted bulk rate. Switching basis clears the entered rates.
How much seed should I apply to a new lawn or an overseeded lawn?
This planner does not prescribe a rate. Species, cultivar, establishment method, site and product instructions can change the appropriate rate. Enter separate zones when their chosen rates differ.
How do mixtures and coatings affect the result?
Enter each listed component’s purity as its share of the entire bag, then its germination percentage. Listed purities must total no more than 100%. The remainder stays unclassified; the calculator does not assume it is coating, inert material or weeds.
Why are reserve and bag surplus separate?
Reserve is extra stock you deliberately choose to purchase. Bag surplus is the unavoidable excess from rounding the combined requirement up to whole bags. Both remain after the modeled application and should not be treated as instructions to increase the rate.
Why can a lower price per PLS pound cost more overall?
Different bag sizes, whole-bag rounding and delivery charges can change the final purchase cost. Compare the complete purchase as well as the bag price per PLS pound. Cost alone does not establish species suitability or field performance.
Can I compare lots with different seed species?
You can compare their supplied label fractions and purchase quantities, but equal PLS weight is not equal seed count or agronomic suitability. Select appropriate products and rates before using the financial comparison.
Why do blank inputs remove results?
A required blank, invalid percentage or zero PLS fraction prevents a valid comparison. Your draft stays editable with linked errors. Correct it to restore the results and export controls; a previous valid purchase is not shown as current.
Similar Calculators
Sod Calculator & Pallet Planner
Measure lawn outlines and garden-bed cutouts, compare sod pallets and loose rolls, and explore cutting allowances with a scaled plan, supplier costs and CSV export.
Lawn Fertilizer Calculator
Calculate fertilizer product needed from lawn area, nitrogen target, N-P-K analysis, and bag coverage.
Plant Spacing & Layout Calculator
Plot rectangular, staggered or triangular plant spacing around paths. Compare exact planting counts, whole-tray orders and costs, with a scaled map and coordinate CSV.
