Candle Wax & Fragrance Batch Calculator

Use the actual fill line of your candle vessels to estimate the wax and fragrance to weigh. Combine different vessel sizes in one batch, using measured milliliters, U.S. fluid ounces or the weight of water at the fill line. Enter your ingredient densities, the fragrance share, and the portion of the mixture expected to remain in equipment. Compare different loads and save quantities by vessel group.

Wax and fragrance by weight

Size a candle wax batch

Use measured vessel fills and ingredient densities to estimate how much wax and fragrance to weigh for your full batch.

What to weigh

Wax to weigh

3,000 g

Fragrance to weigh

240 g

Total to mix

3,240 g

Target fills
3,440 mL · 20 vessels
Blend at fill line
3,110.4 g
Expected mix loss
129.6 g

Fragrance is 8% of wax weight and 7.41% of finished blend weight.

3,000 g wax and 240 g fragrance to weigh.

Blend settings

Example densities are editable assumptions. Use measured or product-specific densities for your mixture.

Percent of wax weight.

Share of the prepared mixture expected to remain in the pitcher or tools.

Vessel groups

Group vessels that share the same target fill. Set each group’s volume or tared water weight.

Vessel group 1

Use the volume at your intended fill line.

Vessel group 2

Use the volume at your intended fill line.

Fragrance load comparison

Vessel fills, material densities and loss stay fixed. The bars show the fragrance to weigh for each load of wax weight.

0%

0 g fragrance · 3,225 g wax

5%

154.03 g fragrance · 3,080.6 g wax

8% · selected

240 g fragrance · 3,000 g wax

10%

294.86 g fragrance · 2,948.57 g wax

12%

347.87 g fragrance · 2,898.88 g wax

15%

424.11 g fragrance · 2,827.4 g wax

Show vessel batch table
Fill and ingredient quantities by group
Vessel groupVesselsFill per vesselBlend per vesselWax to weighFragrance to weigh
Glass tumblers12220 mL198.92 g2,302.33 g184.19 g
Travel tins8100 mL90.42 g697.67 g55.81 g

Export the batch

Save the blend settings, measurements, vessel groups and fragrance comparison in grams and milliliters.

Download candle batch CSV
Show selectable CSV

How to use this calculator

  1. Start with Two vessel sizes example or Water-weight example. In Vessel groups, name each group and enter the number of vessels that share a fill size.
  2. Set Fill measurement to mL fill, US fl oz fill, or Water weight (g). Enter the amount at your intended fill line per vessel. For water weight, tare the empty vessel before weighing its water.
  3. In Blend settings, enter wax and fragrance densities. Set Fragrance load and select Fragrance percent basis to match your recipe. Enter Expected mix loss as a share of the prepared blend.
  4. Read What to weigh and choose grams or weight ounces. Compare other loads in Fragrance load comparison.
  5. Open Show vessel batch table to check the filled mass per vessel and the prepared ingredient amounts by group. Download candle batch CSV for a batch record.

The Formula

The mathematical logic powering this calculation is:

Find each vessel’s target fill volume in mL. For tared water weight m, fill volume equals m ÷ 0.99820675 under the 20 °C water-density reference. A U.S. fluid ounce is 29.5735295625 mL. Multiply each measured fill by its vessel count and add the groups to get total poured volume V.
If fragrance is P percent of wax weight, the fragrance-to-wax mass ratio is f = P/100. If fragrance is P percent of total blend weight, f = P/(100 − P). The blend percentage of any ratio f is 100f/(1 + f). Use the basis that matches your recipe.
For wax and fragrance densities ρw and ρf in g/mL, estimate volume as the sum of the component volumes. With wax mass w and fragrance mass fw, V = w/ρw + fw/ρf, so the wax in the filled vessels is w = V/(1/ρw + f/ρf). Divide both filled masses by 1 − L, where L is the fraction of the prepared mixture expected to remain in the pitcher or tools. This assumes lost mixture has the same composition as the filled blend. The result gives wax and fragrance to weigh together. A weight ounce equals 28.349523125 g.
Choose 1 to 12 vessel groups of 1 to 100,000 vessels each. Enter each target fill from 1 to 10,000 mL equivalent, density from 0.2 to 2 g/mL, fragrance from 0 to 25% of wax weight or 0 to 20% of blend weight, and mix loss from 0 to 25% of the prepared blend. The calculator uses those bounds for numerical comparison. Inputs accept plain decimals to eight places. Switching fill or percentage units keeps the original quantity until you edit the converted field. The fragrance chart varies the load while holding the measured fills, material densities and expected mix loss fixed.
This is a weight and fill estimate. It assumes that component volumes add and uses the supplied densities for the mixture being measured. Material temperature, density variation and blending can change fill behavior. The example densities show the calculation and are editable; use your own applicable product data.

Worked Example

If you input:

  • Vessel groups: 12 glass tumblers × 220 mL and 8 travel tins × 100 mL
  • Wax density: 0.90 g/mL
  • Fragrance density: 0.96 g/mL
  • Fragrance load and basis: 8% of wax weight
  • Expected mix loss: 4% of prepared blend

Result:

The 20 vessels require a total target fill of 3,440 mL. Weigh 3,000 g of wax and 240 g of fragrance. The 3,240 g prepared blend leaves about 3,110.4 g at the fill lines after 129.6 g expected mix loss. The entered 8% of wax weight is about 7.41% of the blend weight.

Frequently Asked Questions

How much wax do I need if I know how much water my vessel holds?

Tare the empty vessel and weigh the water at the intended fill line. Divide the water mass by the reference water density to estimate volume. Your actual wax amount then depends on wax density, fragrance load, vessel count and the expected mix loss.

What does 8% fragrance load mean?

On a wax-weight basis, 8% means 8 g of fragrance per 100 g of wax, or about 7.41% of the total blend. On a total-blend basis, 8% means 8 g of fragrance in every 100 g of finished blend. Set the percent basis that your recipe uses.

Why is the prepared batch larger than the amount in the vessels?

Expected mix loss is a fraction of the amount you prepare. With a 4% loss, the batch needs the filled blend amount divided by 0.96 so the remaining 96% reaches the target fill.

Can I include different vessels in one batch?

Yes. Add each fill size as a vessel group with its own label and quantity. The blend uses the same densities, fragrance ratio and loss for all groups. The table and CSV retain each group’s quantities.

Why do both fluid ounces and weight ounces appear?

U.S. fluid ounces measure how much space the fill occupies. Weight ounces measure how much ingredient or mixture goes on the scale. The workspace converts between volume and mass using the entered densities.

Does the chart change the fill level when I compare fragrance amounts?

The target fill volumes remain fixed. A different fragrance ratio changes how much wax and fragrance together occupy that volume when the entered densities differ.

Similar Calculators