Alcohol by Volume (ABV) Calculator
Turn your original and current brewing readings into a useful batch record. Compare standard and alternate ABV estimates, follow measured gravity over time, and see how your assumed reading offsets affect the result. Choose hydrometer SG or raw refractometer Brix with an explicit wort correction factor. These empirical beer estimates do not certify alcohol content or determine when a batch is ready to bottle.
Follow your batch, reading by reading
Estimate beer ABV, compare two formulas, and see how your measurement assumptions change the result.
These are brewing estimates, not certified alcohol measurements or a bottling-readiness check. Use prepared, temperature-corrected samples. Additions, dilution or blending after the original reading invalidate this comparison.
Latest observation, day 7: standard estimate 5.25 percent ABV.
Standard ABV estimate
5.25%
Latest reading · day 7
Alternate ABV estimate
5.34%
Difference: 0.09 percentage points. Neither formula is a laboratory measurement.
Apparent attenuation
80.00%
Gravity drop relative to original gravity points; not a direct measurement of sugar consumed.
Start with your instrument
Each instrument keeps its own draft. Switching instruments does not convert a fermented Brix reading into a hydrometer measurement.
Original SG 1–1.2; observed SG 0.98–1.2. Readings support six decimal places. Days 0–365 support three decimal places and must increase. Numerical limits do not establish physical accuracy.
Your measured history
Enter 1–60 actual observations in day order. Rising readings are retained for review. Connecting lines show the sequence, not a prediction between samples.
How much could a reading change?
Enter your own absolute offsets: 0–0.01 SG. We compare four endpoint combinations. This is a scenario comparison, not a confidence interval. Calibration-factor error and empirical formula error are excluded.
See the measurements in context
Solid blue circles: standard ABV. Dashed purple squares: alternate ABV.
Day 7 · inspect the estimate
Current gravity: 1.0100 SG, from 1.01 SG. Standard 5.25% ABV; alternate 5.34% ABV.
Across the four reading scenarios: standard 4.99–5.51% ABV; alternate 5.07–5.61% ABV.
| Original reading | Observed reading | Standard ABV | Alternate ABV / status |
|---|---|---|---|
| 1.049 SG | 1.009 SG | 5.25% | 5.33% |
| 1.049 SG | 1.011 SG | 4.99% | 5.07% |
| 1.051 SG | 1.009 SG | 5.51% | 5.61% |
| 1.051 SG | 1.011 SG | 5.25% | 5.35% |
Complete observation table
| Day | Reading (SG) | Original SG | Current SG | Standard ABV % | Alternate ABV % | Apparent attenuation % |
|---|---|---|---|---|---|---|
| 3 | 1.025 | 1.0500 | 1.0250 | 3.28 | 3.39 | 50.00 |
| 7 | 1.01 | 1.0500 | 1.0100 | 5.25 | 5.34 | 80.00 |
Keep your batch record
Export inputs, assumptions, every observation and all four sensitivity scenarios per observation. Extra decimal digits preserve the calculation, not measurement accuracy.
How to use this calculator
- Choose Reading instrument. Enter the Original reading before fermentation. In refractometer mode, enter raw Brix and your measured Wort correction factor; the example 1.04 is only an assumption.
- Enter each actual Day and Reading in Your measured history, in increasing day order. Add or remove observations as needed. Clearing an input keeps it editable and suspends dependent results.
- Set your Original reading ± and Each observed reading ± assumptions in the instrument’s units. These offsets explore sensitivity; they do not include every source of measurement error.
- Compare both ABV estimates and apparent attenuation. Switch Chart measure between gravity and ABV, and choose Inspect observation to review that sample and all four sensitivity scenarios.
- Expand the Complete observation table and export the fermentation CSV, or select its copyable text. A trend or repeated value alone does not establish fermentation completion or bottling readiness.
The Formula
The mathematical logic powering this calculation is:
Hydrometer mode uses prepared, temperature-corrected specific gravity directly. Standard ABV (%) = 131.25 × (OG − FG). Alternate ABV (%) = 76.08 × (OG − FG) × FG / [(1.775 − OG) × 0.794]. Apparent attenuation (%) = 100 × (OG − FG) / (OG − 1); it is undefined at OG = 1.
Refractometer mode first divides both raw Brix readings by the entered wort correction factor. For corrected original I and current F: OG = 1 + I / [258.6 − (I / 258.2) × 227.1]. Novotný quadratic FG = 1 + 0.00001335 I² − 0.00003239 I F + 0.00002916 F² − 0.002421 I + 0.006219 F. These empirical fits can differ near fermentation start; unchanged Brix can still produce a small estimated ABV, which is not evidence of alcohol production.
For every observation, recompute four combinations of original ± original tolerance and current ± reading tolerance. Unsupported combinations retain their explanations; a complete scenario range is given only when all four are supported. This is not a confidence interval and excludes model and calibration-factor uncertainty. Do not apply this unchanged-original model to batches with later additions, dilution or blending.Worked Example
If you input:
- Reading instrument: Hydrometer · specific gravity
- Original reading: 1.050 SG
- Observed history: Day 3: 1.025 SG; day 7: 1.010 SG
- Original reading ±: 0.001 SG
- Each observed reading ±: 0.001 SG
Result:
At day 7, the standard estimate is 5.25% ABV and the alternate estimate is 5.34% ABV, a difference of 0.09 percentage points. Apparent attenuation is 80.00%. Across the four ±0.001 SG reading scenarios, standard ABV ranges from 4.99% to 5.51%. These are estimates and reading scenarios, not certified strength or a confidence interval.
Frequently Asked Questions
Can I use a refractometer reading directly as final gravity?
No. Once alcohol is present, a raw Brix reading is not equivalent to hydrometer SG. Choose refractometer mode and provide the original reading and a calibrated wort correction factor. This tool applies Novotný’s quadratic beer correction before calculating ABV. It is not a general correction for every fermented beverage.
Which ABV formula should I trust?
Both formulas are estimates from gravity change. Their disagreement helps show that formula choice matters, especially at stronger gravities; it does not establish which result is correct for your batch. The standard formula is the primary displayed estimate, and the alternate is shown alongside it. Analytical measurement is needed when verified alcohol content matters.
Why can unchanged Brix show a small ABV estimate?
The original-gravity conversion and fermented-gravity correction are separate empirical fits. They do not exactly coincide at identical Brix readings. The tool flags this case and retains the arithmetic instead of silently forcing a zero. No observed Brix decrease means that the formula offset is not evidence of alcohol production; check a prepared hydrometer sample.
Does apparent attenuation measure the percentage of sugar consumed?
It compares the observed gravity drop with original gravity points above water. Alcohol also changes density, so it is an apparent measure, not a direct sugar assay. It can exceed 100% when current SG is below 1, and is undefined when original SG equals 1. The tool does not clip it to a more plausible-looking percentage.
What does the sensitivity range include?
Only four combinations of your independent original/current reading offsets. It excludes errors in sample preparation, temperature correction, the wort correction factor and the empirical equations. If any corner falls outside the supported inputs, its reason stays visible and no complete range is displayed. Formula disagreement is shown separately.
Can this predict completion or tell me when to bottle?
No. The chart connects measured observations without predicting future fermentation. Rising readings remain visible for checking, and repeated readings are not treated as a safety or readiness verdict. The tool does not model yeast behavior, contamination, carbonation pressure or packaging.
Which measurements are supported?
Hydrometer original SG is 1–1.2 and current SG 0.98–1.2. Refractometer raw and corrected readings are 0–32 °Bx with correction factor 0.8–1.2. Readings accept six decimal places; days accept three, from 0 through 365, with at most 60 observations. These are numerical limits, not a validated physical accuracy envelope. The underlying correction was developed for beer and is less reliable near fermentation start.
What changes would invalidate the original reading?
Sugar, priming additions, dilution, blending and other changes after the original reading break the assumption that all readings describe the same unchanged batch undergoing fermentation. This tool does not reconstruct those changes. Use prepared samples and account for instrument calibration before entering readings.
Similar Calculators
Serial Dilution Calculator
Plan serial dilutions by factor, target concentration or transfer volume. Keep the volume you need at every stage, inspect material balances and export the series.
pH Calculator
Calculate ideal pH, explore acid–base species and inspect a dilution-aware titration curve using your concentrations and equilibrium constants.
Percentage Calculator
Easily calculate percentages, percentage changes, and find what percent one number is of another.
