Time and a Half Calculator

Find the time-and-a-half rate or estimate gross weekly pay. Single hourly rate mode uses seven paid-time totals and your chosen overtime tiers. Weighted workweek mode combines straight-time earnings at several rates and an optional includable bonus for one employer in one U.S. federal workweek. Each mode shows the additional overtime premium and supports a CSV export.

Gross pay planner

Plan the pay behind your hours

Pay calculation mode
Assumption estimate in USD, not an overtime-entitlement or payroll determination. Every entered minute counts toward your chosen thresholds. Exclude unpaid breaks and any paid leave that should not count.

Use one assumed hourly rate for all seven days. Choose Weighted workweek to combine rates and an included weekly bonus.

Try a workweek

Weekly threshold only: see where the final day's hours move into overtime.

Illustrative daily tiers after 8 and 12 hours; compare regular, overtime and 2× pay.

Six nine-hour days: daily overtime is assigned before the remaining weekly excess.

Seven days of paid time

Day 1 starts your chosen workweek. Use separate hours and minutes: 7h 30m means 7.5 hours.

Day 1
Day 2
Day 3
Day 4
Day 5
Day 6
Day 7

Your overtime assumptions

These are editable planning choices, not selected jurisdiction rules.

Weekly overtime after

1.5 means time and a half. The same multiplier applies to weekly and optional daily overtime.

Estimated gross pay $1,187.50 for 45h 00m. Overtime hourly rate $37.50.

Your time-and-a-half hourly rate

$37.50

25 USD/hour × 1.5. This is the full overtime rate, including regular pay.

Estimated gross weekly pay

$1,187.50

45h 00m entered. Before tax, deductions and other compensation.

Base pay plus the premium

All minutes at regular rate
$1,125.00
Additional premium
$62.50
Regular time
40h 00m
Overtime time, daily + weekly
5h 00m

Where each day's hours go

Bar length is paid time. Every minute appears in one tier; the table below gives exact amounts.

  • Regular
  • Daily OT
  • Weekly OT
  • Higher daily tier
Daily paid hours by pay tier45h 00m paid time: 40h 00m regular, 0h 00m daily overtime, 5h 00m weekly overtime and 0h 00m in the higher daily tier. Segment patterns and the accompanying table distinguish the classifications.0h4.5h9hDay 1Day 2Day 3Day 4Day 5Day 60hDay 70h

Daily hours and pay

Daily tiers are assigned first. The remaining time fills the weekly regular allowance from Day 1 onward. OT means overtime.

Every minute appears once. Daily dollar displays are rounded; the weekly total adds unrounded values before rounding once.
DayPaidRegularDaily OTWeekly OTHigher tierGross pay (USD)
Day 19h 00m9h 00m0h 00m0h 00m0h 00m$225.00
Day 29h 00m9h 00m0h 00m0h 00m0h 00m$225.00
Day 39h 00m9h 00m0h 00m0h 00m0h 00m$225.00
Day 49h 00m9h 00m0h 00m0h 00m0h 00m$225.00
Day 59h 00m4h 00m0h 00m5h 00m0h 00m$287.50
Day 60h 00m0h 00m0h 00m0h 00m0h 00m$0.00
Day 70h 00m0h 00m0h 00m0h 00m0h 00m$0.00
Total45h 00m40h 00m0h 00m5h 00m0h 00m$1,187.50

View CSV text

CSV includes inputs, unrounded daily amounts and exact integer pay units. It contains your entered pay and hours.

Method, rounding and what this plan excludes

First, minutes beyond the chosen daily thresholds enter daily overtime or the higher daily tier. The remaining minutes fill the weekly straight-time allowance in entered day order; any remainder receives the overtime multiplier. A minute receives one full rate, never stacked premiums. Exactly at a threshold, the next minute enters the higher tier. Enabling daily tiers can change pay even when the weekly total is unchanged.

One entered rate applies to every day. All seven entered daily totals count toward these assumptions; the tool does not determine which paid breaks, leave or other time qualify. There are no automatic seventh-day, holiday, night-shift, multiple-rate, bonus, exemption or special-occupation rules. This is not a California, FLSA or other jurisdiction compliance calculation, and it does not estimate take-home pay.

Hours use whole minutes. Hourly rates use whole cents and multipliers allow four decimal places. Integer pay numerators are retained exactly within the accepted limits; totals are summed before rounding half-up to the nearest cent. A positive amount below half a cent is labeled less than $0.01, never exact zero. CSV exposes the unrounded numbers and exact numerator (60,000,000 units per USD). The limits — 24 hours per day, 168 per week, 10,000 USD/hour and 5× multipliers — bound this planner; they do not state permitted work limits.

The U.S. Department of Labor describes federal overtime for covered, nonexempt employees and explains that an actual regular rate can include more than an hourly wage. These sources explain why this tool's assumed rate and optional tiers cannot determine entitlement:

Sources checked October 26, 2026. Thresholds and rates shown here are editable examples; no current jurisdiction rule or wage rate is loaded.

How to use this calculator

  1. Choose Single hourly rate for the time-and-a-half rate or a seven-day plan at one assumed rate. Choose Weighted workweek to combine straight-time pay at multiple rates in one federal workweek.
  2. In Weighted workweek, group hours actually worked by straight-time rate. Enter each hour once, for one employer, and add the includable portion of a nondiscretionary bonus earned in that same workweek. The result shows gross pay, the weighted regular rate, hours over 40 and the additional half-time premium.
  3. In Single hourly rate, enter your assumed USD hourly rate and separate hours and minutes for days 1 through 7. Start with the first day of your workweek. Exclude unpaid breaks and leave outside your chosen model.
  4. Set Weekly overtime after and the Overtime multiplier. A multiplier of 1.5 is time and a half. Zero thresholds, zero paid time and zero rates are supported for explicit scenarios, not as legal rules.
  5. If useful, enable daily overtime and a higher daily tier. Keep the higher threshold at or above daily overtime and its multiplier at least as large as the overtime multiplier. Daily tiers are assigned before weekly overtime, without stacking premiums.
  6. Review the gross weekly estimate, base pay and premium breakdown. Use the hours chart and ledger in your chosen mode. Download the CSV or copy it from the text preview.

The Formula

The mathematical logic powering this calculation is:

Overtime hourly rate = assumed regular hourly rate × overtime multiplier.
Assign daily tiers first: minutes beyond the higher daily threshold receive its multiplier; minutes between the daily overtime and higher thresholds receive the overtime multiplier.
From the remaining minutes, allocate up to the weekly threshold to regular pay in Day 1–7 order. Any remaining minutes receive weekly overtime. Each minute belongs to one tier.
Gross pay = rate × (regular minutes + overtime minutes × overtime multiplier + higher-tier minutes × higher multiplier) ÷ 60.
Base pay = rate × all paid minutes ÷ 60; additional premium = gross pay − base pay. Whole minutes, cent-based rates and multipliers to four decimal places retain exact integer pay numerators. Sum before rounding weekly pay half-up to cents.
Weighted workweek: sum worked hours × each straight-time rate, then add an includable bonus earned in that workweek. Divide that amount by hours actually worked. Gross pay = straight-time wages + included bonus + (weighted regular rate × 0.5 × hours over 40). Retain exact amounts through gross pay and round the final total half-up to cents.

Worked Example

If you input:

  • Assumed regular hourly rate (USD): 25.00
  • Day 1–5 paid time: 9 hours 0 minutes each
  • Day 6–7 paid time: 0 hours 0 minutes each
  • Weekly overtime after: 40 hours 0 minutes
  • Overtime multiplier: 1.5
  • Enable daily overtime: Off

Result:

The assumed overtime rate is $25 × 1.5 = $37.50 per hour. Of 45 paid hours, 40 receive regular pay ($1,000) and 5 receive overtime pay ($187.50), for $1,187.50 gross weekly pay. The same total can be viewed as $1,125 base pay for all 45 hours plus $62.50 additional premium. Day 5 contains 4 regular hours and 5 weekly overtime hours.

Frequently Asked Questions

How do I calculate time and a half?

Multiply the assumed regular hourly rate by 1.5. At $25 per hour, time and a half is $37.50 per overtime hour. That is the full hourly amount, including the $25 regular component; the extra premium alone is $12.50. The planner shows both the full overtime rate and the additional premium across the week.

Does this tell me whether I am legally owed overtime?

No. The calculator estimates gross pay under the mode you select. Weighted workweek illustrates the federal weekly formula for a covered, nonexempt employee where the weighted method applies. Confirm eligibility, wage floors, daily or local overtime, and applicable agreements separately. Single hourly rate uses the thresholds you provide.

How do I calculate overtime when I work at two hourly rates?

Choose Weighted workweek when the federal weighted-rate method applies. For 30 hours at $20 and 15 hours at $30, straight-time wages total $1,050. An includable $45 bonus raises the regular-rate earnings to $1,095. Divide by 45 worked hours to get about $24.333333 per hour. The five hours over 40 add a $60.83 premium, bringing gross pay to $1,155.83 after final rounding.

Which bonuses can I enter in Weighted workweek?

Enter an includable nondiscretionary bonus earned within this one workweek, before any related overtime premium. When a bonus covers several workweeks, 29 CFR § 778.209 describes allocating it across those weeks. The worksheet assumes the bonus is includable and the weighted method applies. DOL Fact Sheets #56A and #56C explain which amounts count toward the regular rate.

How are daily and weekly overtime combined without double counting?

Under this planner's convention, daily overtime and the higher daily tier are classified first. Only the remaining minutes fill the weekly regular-time allowance in day order; excess remaining minutes become weekly overtime. A minute receives one full rate. For six nine-hour days with daily overtime after eight hours and weekly overtime after forty hours, the result is forty regular hours, six daily overtime hours and eight weekly overtime hours. This allocation convention is an explicit model assumption, not a complete legal premium-credit rule.

How does the optional double-time tier work?

Enable daily overtime, then add a higher daily tier. Its default multiplier is 2, which is double time; you can choose another multiplier at least as large as the overtime multiplier and at most 5. At $25 per hour, a thirteen-hour day with overtime after eight hours and double time after twelve hours gives 8 × $25 + 4 × $37.50 + 1 × $50 = $400. These thresholds are illustrative choices, not an automatic entitlement rule.

Should I include paid leave, lunch and overnight shifts?

Every minute you enter counts toward this model's thresholds. Exclude unpaid breaks and any paid leave that should not count for your scenario; the tool does not determine which time is eligible. It accepts daily totals, not clock-in or clock-out dates, so it does not split an overnight shift or resolve daylight-saving changes. Determine the relevant day boundaries separately, or use the Time Tracking Calculator to total completed shift ranges before entering the appropriate daily totals.

Why might rounded daily amounts not add to the displayed weekly total?

The model preserves exact integer pay numerators and sums the unrounded amounts before rounding the weekly total half-up to cents. Each displayed day's amount is also rounded for readability, so adding those rounded displays can differ by a cent or more. A positive value below half a cent is labeled less than $0.01 rather than zero. The CSV includes unrounded USD values and exact pay units, where 60,000,000 units equals one dollar.

Is gross overtime pay the same as my take-home pay?

No. Gross pay is the modeled amount before taxes, insurance, retirement contributions, garnishments and other deductions. This tool has no tax-year, filing-status or jurisdiction inputs and does not calculate withholding or net pay. In Weighted workweek, gross pay includes the entered straight-time wages, the entered bonus and the additional weekly overtime premium.

Similar Calculators