Pizza Dough Calculator & Batch Planner

Build one dough formula for several round pizzas or rectangular pans. Enter your chosen dough weight for each group, compare pizza sizes at a shared physical scale, and inspect the weight that would match another pizza’s dough loading. Overall baker’s percentages account for all flour and water, including the preferment, so the final-mix table does not double count starter ingredients. The planner also splits the full recipe into equal ingredient-mass batches within an entered mixer limit. Exact rational quantities preserve unit changes and batch thresholds. This is a formula and portion-planning tool; it does not choose a pizza style, predict fermentation or baking time, convert yeast types, calculate nutrition or establish mixer suitability.

Pizza sizes · baker’s formula · mixer batches

Build one dough plan for every pizza

Choose your pizza sizes and dough weights, account for preferment flour and water, and scale the full formula into mixer batches.

Set the batch

Overall hydration, including water in the preferment. Mathematical range: 0–120%.

0–50%. Added above the requested ball weights; not an assumed fermentation loss.

Enter your own limit, equivalent to 100–1000000 g. Capacity and suitability are not inferred.

Unit changes preserve physical quantities, including rounded conversions, until edited. Authored quantities accept up to six decimals. Examples are editable arithmetic scenarios; fermentation time and baking settings are not calculated.

Pizza groups · 1
Group 1

1–60 characters.

1–1000 whole pizzas in this group.

Your chosen weight controls the recipe. Equivalent range: 10–10000 g.

Equivalent range: 5–200 cm. Dimensions inform the size/loading comparison.

Baker’s formula and preferment

All ingredient percentages use total flour as their basis. The preferment uses the same two-flour blend and is accounted as flour plus water only. All salt, oil, sugar and added yeast go in the final mix. Existing starter is not added again on top of these flour/water quantities.

0–10%; enter your recipe.

0–30%; enter zero when absent.

0–30%; enter zero when absent.

0–5%, as weighed. No fresh/dry/instant equivalence conversion.

0–100%; Flour 1 is the remainder.

0–100% of total flour, not a starter-to-dough percentage.

0–200%. Its water cannot exceed total formula water.

Plan updated: 2 equal mixer batches.

Total dough to mix

1,050 g

Requested portions

1,000 g

Each mixer batch

525 g · 2 batches

Compare your pizza sizes

Each outline represents one pizza; every card uses the same physical scale. Dough loading is mass per surface area, not predicted baked thickness.

4 × round

Diameter 30 cm

250 g each · 706.858347 cm²

Equal dough loading comparison
Target groupEntered mass (g)Same-loading mass (g, approximate)Area ratio
round250 g250 g1

The comparison does not change your chosen weights. Crust style, rim, rising, toppings and baking conditions are outside this area-based comparison.

One complete formula, two mixing stages

Preferment to prepare: 247.49558 g. Extra dough above the requested portions: 50 g.

Left to right: Flour 1, Flour 2, water, salt, oil, sugar and added yeast. Small quantities may be too narrow to see; the table retains their values.
Complete dough ingredient formula
IngredientTotal (g)In preferment (g)Add at final mix (g)
Flour 1494.991161 g98.9982322 g395.992929 g
Flour 2123.74779 g24.749558 g98.9982322 g
Water402.180318 g123.74779 g278.432528 g
Salt15.4684738 g0 g15.4684738 g
Oil12.374779 g0 g12.374779 g
Sugar0 g0 g0 g
Added yeast1.2374779 g0 g1.2374779 g

Overall percentages include the preferment’s flour and water. Do not add the total and final-mix columns together. Quantities are calculated without rounding; measuring equipment may require a practical weighing plan.

Mix in 2 equal batches

Each batch contains 525 g, including 123.74779 g of prepared preferment, within your entered 1,000 g limit.

Ingredients per equal mixer batch
IngredientTotal in batch (g)Already in preferment (g)Add at final mix (g)
Flour 1247.49558 g49.4991161 g197.996464 g
Flour 261.8738951 g12.374779 g49.4991161 g
Water201.090159 g61.8738951 g139.216264 g
Salt7.73423689 g0 g7.73423689 g
Oil6.18738951 g0 g6.18738951 g
Sugar0 g0 g0 g
Added yeast0.618738951 g0 g0.618738951 g

This divides ingredient mass, not whole pizza balls. You may need to combine dough across batches before portioning. Mixer suitability, process timing, fermentation and starter maturity are not determined.

Save the complete dough plan

CSV includes the full formula, preferment and final-mix amounts, equal batches, entered groups, all size comparisons and unit-conversion records. Exact masses use grams; geometric comparisons are labeled approximate.

How to use this calculator

  1. Enter Total water / flour, Extra dough above portions and Maximum dough per mixer batch. Use your recipe and equipment limit; the calculator does not recommend them.
  2. Expand Pizza groups. For each group enter a name, round or rectangular shape, whole count, chosen Dough mass per pizza and its diameter or pan dimensions. The chosen mass controls the recipe; dimensions provide the comparison.
  3. Expand Baker’s formula and preferment. Enter salt, oil, sugar and added yeast as percentages of all flour. Set Flour 2 share to split the total flour into two types.
  4. Enter the flour percentage included in preferment and that preferment’s water-to-flour percentage. Its flour and water are included in the overall formula. If it contains more water than the formula allows, correct the highlighted entry.
  5. Compare the same-scale outlines and select Reference pizza for equal dough loading. Read the total/preferment/final-mix table, then the per-batch table. Combining dough across mixer batches may be needed before portioning.
  6. Use Mass units or Pizza dimension units to convert complete entries without changing physical quantities. Download pizza dough CSV or Show copyable CSV for every group, mixing stage, batch quantity and size comparison.

The Formula

The mathematical logic powering this calculation is:

Requested portion mass P = Σ(number of pizzas × chosen dough mass per pizza)
Total mix mass M = P × (1 + extra dough / 100)
Total flour F = M / [1 + (water% + salt% + oil% + sugar% + yeast%) / 100]
Each ingredient = F × its baker percentage / 100
Flour 2 = F × its flour share / 100; Flour 1 is the remainder.

Preferment flour = F × prefermented-flour share / 100
Preferment water = preferment flour × preferment hydration / 100
Final-mix flour/water = total flour/water − preferment flour/water
All salt, oil, sugar and added yeast go in the final mix.
The preferment uses the same flour blend as the full formula.

Mixer batches = ceil(M / entered maximum mixer load)
Divide every ingredient and prepared preferment by the batch count.

Round area ≈ π × diameter² / 4; rectangular pan area = width × length
Dough loading = entered mass / surface area
Matched mass ≈ reference mass × target area / reference area
This is an area-based comparison, not predicted crust thickness or an automatic change to the chosen weights.

Worked Example

If you input:

  • Pizza groups: 4 round pizzas, 30 cm diameter, 250 g dough each
  • Overall baker percentages: 65% water, 2.5% salt, 2% oil, 0% sugar, 0.2% added yeast
  • Flour blend: 20% Flour 2 and 80% Flour 1
  • Preferment: 20% of total flour at 100% hydration
  • Extra dough / mixer limit: 5% / 1000 g

Result:

Four 250 g portions require 1000 g. Adding 5% extra makes a 1050 g mix. Total flour is 1050000/1697 g (about 618.738951 g), of which 20% is Flour 2. The preferment contains equal flour and water and weighs 420000/1697 g (about 247.495580 g). The exact mixer ceiling gives two equal 525 g batches; each includes half the prepared preferment and half the final-mix ingredients. The 30 cm round outlines each have about 706.858347 cm² of area.

Frequently Asked Questions

Does pizza size automatically determine the dough-ball weight?

No. You enter the dough mass you want for each group. Shape and dimensions calculate area and dough loading, and the comparison shows what would match another group’s loading. The chosen masses remain unchanged. Rim size, style, rising, toppings and baking conditions can make two equal-area dough loads behave differently.

What is a baker’s percentage?

Each ingredient is expressed relative to total flour weight, which is 100%. Water at 65% means 65 g of water per 100 g of all flour. Ingredient percentages therefore need not add to 100%. The planner solves the flour mass from the requested total dough mass and then applies each percentage.

Is prefermented flour percentage the same as starter percentage?

No. Prefermented-flour share is the flour inside the preferment divided by all flour in the formula. Preferment hydration is its water divided by its flour. At 100% hydration, a preferment contains equal flour and water, so its total weight is twice its flour weight. It is already included in the overall formula, not added again on top.

What does the preferment calculation exclude?

It accounts for flour and water only, using the same two-flour blend as the full recipe. Salt, oil, sugar and added yeast are assigned to the final mix. It does not calculate a seed starter build, fermentation loss, microbes, maturity, acidity or proofing time, and it does not convert fresh, active-dry or instant yeast. Enter yeast as the ingredient you intend to weigh.

Why can the final-mix water be zero or invalid?

Zero is valid when all formula water is supplied by the preferment. If preferment flour share times its hydration would require more water than the overall formula provides, the combination is invalid. The comparison is exact; it does not hide a small negative final-water amount by rounding it to zero.

Does each mixer batch contain a whole number of pizzas?

Not necessarily. Batches divide ingredient mass equally to stay within the entered capacity. They do not allocate complete dough balls. You may need to combine dough from batches before portioning, particularly when a chosen ball is heavier than one equal mixer batch. The arithmetic does not establish that a mixer can handle this dough or specify a mixing process.

How do extra dough, unit conversion and rounding work?

Extra dough is added above the requested portion masses; it is not deducted as an assumed processing loss. Grams/ounces and centimetres/inches retain exact physical quantities, even when a displayed conversion is rounded, until the field is edited. Authored numeric quantities accept up to six decimals. Formula quantities and batch thresholds remain exact internally; display values are rounded and tiny nonzero amounts remain visible. CSV preserves exact rational grams.

What inputs are supported?

Use 1–12 groups, 1–1000 pizzas per group, 10–10000 g per chosen dough portion and dimensions of 5–200 cm. Mathematical percentage ranges are water 0–120%, salt 0–10%, oil and sugar 0–30%, added yeast 0–5%, either flour share 0–100%, preferment hydration 0–200% and extra dough 0–50%. Mixer capacity is 100–1000000 g. These bounds are not recommended recipes, nutrition guidance or equipment ratings.

Similar Calculators