Interest-Only Mortgage Payment Calculator
See how a home loan payment changes when the initial interest-only period ends. Enter the loan amount, original term and two note rates to model a single reset to a fully amortizing payment. Compare payments, interest and balances with a fixed-rate loan that starts repaying principal on day one. Enter a monthly ceiling for principal and interest to see the highest reset rate, in whole basis points, that fits that budget on the remaining term.
Interest-only payment reset planner
Compare the first principal and interest payment after reset with a loan that repays principal from day one.
At reset, monthly principal and interest is $1,477.98. Payment change +$644.65.
Loan and budget inputs
Enter annual note rates. The reset rate stays fixed for the remaining months. The comparison uses the same starting principal and total term.
Use a ceiling for principal and interest. Taxes, insurance, escrow and fees are separate from this comparison.
Payments, balances and interest
Month 60. Monthly P&I payment is $833.33 on the staged loan and $1,231.43 on the fixed comparison.
Reset rate your P&I ceiling supports
Your ceiling is $1,500.00 per month for principal and interest over the 300 payments after reset.
7.66%
This is the maximum in 0.01 percentage-point steps. The payment is $1,498.86. At 7.67%, the unrounded payment exceeds the ceiling and displays as $1,500.17.
The entered reset payment is $22.02 below your P&I ceiling.
Payment and balance milestones
| Month and event | Staged P&I | Fixed P&I | Staged balance | Fixed balance |
|---|---|---|---|---|
| 0 · Loan start | — | — | $200,000.00 | $200,000.00 |
| 60 · Last interest-only payment · Inspection | $833.33 | $1,231.43 | $200,000.00 | $186,674.48 |
| 61 · First reset payment | $1,477.98 | $1,231.43 | $199,772.02 | $186,415.31 |
| 360 · Final payment | $1,477.98 | $1,231.43 | $0.00 | $0.00 |
Interest paid by month 60
$50,000.00 staged · $60,560.55 fixed
Interest over the full term
$293,394.71 staged · $243,316.38 fixed
How to use this calculator
- Enter the Loan amount, Total term (months) and Interest-only months. The original term must include both phases.
- Enter the Initial note rate, the Reset note rate you want to test, and a Fixed comparison note rate for a loan with the same starting principal and term.
- Set a Monthly P&I ceiling. Read the maximum modeled reset note rate, the associated payment and the next basis-point step when shown.
- Switch the Chart measurement among payment, balance and cumulative interest. Inspect any month or jump to the last interest-only or first reset payment.
- Review the Payment and balance milestones and select Download mortgage CSV to save every month for both scenarios.
The Formula
The mathematical logic powering this calculation is:
Let P be the original loan principal, N the total months, I the interest-only months and n = N − I the months remaining after the interest-only period. For a note rate R expressed as a percentage, the monthly rate is r = R/1,200. In months 1 through I, the staged loan pays P × r at the initial note rate, and the principal remains P. Starting at month I + 1, use the entered reset note rate to compute P&I = P × r ÷ (1 − (1 + r)^(−n)). With a zero reset rate, P&I = P/n. The fixed comparison uses its own note rate and all N months from day one.
For each amortizing month, interest is the previous balance times the applicable monthly rate. The rest of the payment reduces the balance. Each scenario pays off at the end of month N under the stated assumptions. The monthly change at reset is the first reset P&I less the last interest-only payment. A percent change is shown when the initial payment is positive.
At a given remaining term, the amortizing payment increases as the nonnegative note rate rises. The calculator searches from 0% through 60% in 0.01 percentage-point steps and shows the highest step with an unrounded payment at or below the ceiling. Below the zero-rate payment P/n, no modeled rate fits. When 60% fits, the calculator reports the model's upper bound as a lower bound on the true maximum.
Enter a loan amount from $0.01 to $1 billion, a ceiling from $0 to $10 billion, each note rate from 0% to 60%, and a total term from 2 to 480 whole months. At least one payment is needed in each phase. Inspection month 0 shows the balance before any payment. Figures use monthly accrual with full precision and display in USD. Your lender may round payments or use different timing. This model covers principal and interest, with one fixed illustrative reset. Taxes, homeowners insurance, mortgage insurance, escrow, fees, future rate adjustments, caps, prepayments and balloon payments are outside the calculation.Worked Example
If you input:
- Loan amount ($): $200,000
- Total term (months): 360
- Interest-only months: 60
- Initial note rate (%): 5%
- Reset note rate (%): 7.5%
- Fixed comparison note rate (%): 6.25%
- Monthly P&I ceiling ($): $1,500
- Inspect month: 60
Result:
The interest-only months cost $833.33 each, with $200,000 still owed after month 60. The first reset payment in month 61 is $1,477.98, an increase of $644.65. The fixed comparison costs $1,231.43 per month, with $186,674.48 owed after month 60. A $1,500 P&I ceiling supports 7.66% in whole basis points. The model payment is $1,498.86 at 7.66% and $1,500.17 at 7.67%.
Frequently Asked Questions
Why does my payment change after the interest-only period?
Interest-only payments cover the interest due while leaving the principal outstanding. After the period ends, this scenario repays the balance in the remaining months. The payment can increase even at the same note rate because the same principal has fewer months for repayment.
Can the modeled reset payment be lower?
Yes, a much lower reset rate can offset the new principal repayment in this model. The signed payment change reflects the two rates and the remaining term you enter.
How do I find the highest reset rate within my budget?
Use your principal-and-interest limit as the ceiling. The tool finds the highest rate in basis points up to 60% with a modeled payment within the ceiling. A ceiling below principal divided by the remaining months cannot fund the scheduled repayment even at 0%.
Should I enter an APR or a note rate?
Use each annual note rate, because the loan interest calculation applies the note rate to the principal. APR can account for additional borrowing costs. This comparison keeps fees and other charges outside the monthly P&I calculation.
Does this model predict the new rate on an adjustable-rate mortgage?
Use an illustrative reset rate as an input. Your loan documents describe how the actual reset rate is determined, including any index, margin, timing rules and rate caps. You can enter separate trial rates to compare the cash-flow effects.
What counts as P&I in the payment ceiling?
P&I is scheduled principal and interest. A household's housing budget may also need to cover property taxes, insurance, homeowners association dues or other expenses. Enter the part of your budget available for principal and interest.
Similar Calculators
Mortgage Payment Calculator
Estimate your full monthly mortgage payment, including principal, interest, property tax, homeowners insurance, PMI, HOA dues, and extra principal payments.
Mortgage Recast Calculator
Compare mortgage recasting with keeping your payment after a lump sum. Visualize payment reductions, payoff dates, interest, remaining debt and cash outlay.
Mortgage Affordability Calculator
Estimate how much house you can afford based on income, debts, interest rate, and loan term.
