Exponential Growth & Decay Calculator
Compare exponential growth and decay over a time horizon you choose. Use an initial amount and a known rate, or infer the rate from two positive observations. Inspect the projection at a specific time, switch between linear and logarithmic amount scales, and find when a desired amount is reached. Use the doubling time or half-life to compare processes on the same time scale.
Exponential growth and decay workspace
Project a constant proportional rate or fit an exponential curve to two observations.
Growth. Horizon amount 596.04645. Target 3.1062837 time units.
Set the model and horizon
Use a consistent time unit and enter a positive starting amount at time zero. Scientific notation such as 1e-6 is accepted.
Effective change is the percent gained or lost after one time unit. Continuous rate is the log rate multiplied by 100. Each convention retains its own draft.
Forward projection chart
The slider selects chart samples. Use Inspect at to enter an exact time.
At 4 time units, the projected amount is 244.14063.
Equivalent rates
- Effective change per time unit
- 25%
- Continuous rate per time unit
- 22.314355%
Projection data
The table contains all 61 evenly spaced chart samples. CSV also includes the current inspection, the target and the second observation when fitting a model.
View the projection table
| Elapsed time | Projected amount |
|---|---|
| 0 | 100 |
| 0.13333333 | 103.01995 |
| 0.26666667 | 106.1311 |
| 0.4 | 109.33621 |
| 0.53333333 | 112.63811 |
| 0.66666667 | 116.03972 |
| 0.8 | 119.54406 |
| 0.93333333 | 123.15423 |
| 1.0666667 | 126.87343 |
| 1.2 | 130.70494 |
| 1.3333333 | 134.65217 |
| 1.4666667 | 138.7186 |
| 1.6 | 142.90783 |
| 1.7333333 | 147.22357 |
| 1.8666667 | 151.66965 |
| 2 | 156.25 |
| 2.1333333 | 160.96867 |
| 2.2666667 | 165.82985 |
| 2.4 | 170.83782 |
| 2.5333333 | 175.99704 |
| 2.6666667 | 181.31206 |
| 2.8 | 186.7876 |
| 2.9333333 | 192.42849 |
| 3.0666667 | 198.23973 |
| 3.2 | 204.22648 |
| 3.3333333 | 210.39401 |
| 3.4666667 | 216.74781 |
| 3.6 | 223.29348 |
| 3.7333333 | 230.03683 |
| 3.8666667 | 236.98383 |
| 4 | 244.14063 |
| 4.1333333 | 251.51355 |
| 4.2666667 | 259.10913 |
| 4.4 | 266.9341 |
| 4.5333333 | 274.99538 |
| 4.6666667 | 283.3001 |
| 4.8 | 291.85562 |
| 4.9333333 | 300.66952 |
| 5.0666667 | 309.74958 |
| 5.2 | 319.10387 |
| 5.3333333 | 328.74064 |
| 5.4666667 | 338.66845 |
| 5.6 | 348.89607 |
| 5.7333333 | 359.43255 |
| 5.8666667 | 370.28724 |
| 6 | 381.46973 |
| 6.1333333 | 392.98992 |
| 6.2666667 | 404.85802 |
| 6.4 | 417.08453 |
| 6.5333333 | 429.68028 |
| 6.6666667 | 442.65641 |
| 6.8 | 456.02441 |
| 6.9333333 | 469.79612 |
| 7.0666667 | 483.98373 |
| 7.2 | 498.59979 |
| 7.3333333 | 513.65726 |
| 7.4666667 | 529.16945 |
| 7.6 | 545.1501 |
| 7.7333333 | 561.61336 |
| 7.8666667 | 578.57381 |
| 8 | 596.04645 |
How to use this calculator
- Choose Known rate or Two observations under Model input. Enter the Initial amount for time zero.
- For Known rate, pick the Rate convention and enter Rate per time unit (%). For Two observations, enter the Second observed amount and its positive elapsed time.
- Set a Display horizon, an Inspect at time within that horizon, and a positive Target amount.
- Read the horizon amount, time to target and doubling time or half-life. Use the linear or logarithmic amount scale and move the inspection slider to view other chart samples.
- Open the projection table or use Download projection CSV to keep all sampled amounts, the precise inspection, the target and any fitted observation.
The Formula
The mathematical logic powering this calculation is:
The model is A(t) = A₀e^(kt), with A₀ the positive amount at time zero and k the continuous log rate per time unit. For an effective percentage rate p, use k = ln(1 + p/100). This makes A(1) = A₀(1 + p/100). For a continuous percentage rate, k = p/100. Enter 25 for a 25% rate. The convention determines whether the one-unit change is exactly 25% or e^0.25 − 1.
In Two observations mode, enter the second positive amount A₁ at elapsed time t₁ > 0. Then k = ln(A₁/A₀)/t₁. Positive k produces growth, negative k produces decay, and zero k gives a constant amount. With k ≠ 0, the time for a doubling during growth or a halving during decay is ln(2)/|k|.
The exact-equality target time is ln(T/A₀)/k for positive target amount T and k ≠ 0. A matching starting amount is reached at time zero. A negative solution lies before time zero, while a constant model only reaches its starting amount. A positive time beyond the display horizon remains visible as a result. Fractional times follow the continuous curve implied by the selected convention.
Enter positive quantities from 1e−150 to 1e150, and elapsed observation time or display horizon from 1e−9 to 1e9 time units. Inspection time is between zero and the horizon. Effective rates must be greater than −100% and at most 1,000,000%. Continuous rates range from −1,000,000% to +1,000,000%. A nonzero authored rate must have magnitude at least 1e−12%. Projection amounts outside 1e−250 through 1e250 are labeled by range and omitted from the chart and numeric CSV cells. The chart uses 61 evenly spaced samples. An inspection or threshold marker can fall between samples, and values display up to eight significant digits.Worked Example
If you input:
- Model input: Known rate
- Initial amount: 100 units
- Rate convention: Effective change (%)
- Rate per time unit (%): 25%
- Display horizon (time units): 8
- Inspect at (time units): 4
- Target amount: 200 units
Result:
The effective factor is 1.25. The model gives 100 × 1.25⁴ = 244.140625 at time 4 and about 596.04645 at time 8. The target of 200 doubles the initial amount, so both time to target and doubling time are ln(2)/ln(1.25), about 3.1062837 time units.
Frequently Asked Questions
What is the difference between effective and continuous percentage rates?
An effective 25% increase produces a factor of 1.25 in one time unit. A continuous log rate of 25% produces the factor e^0.25, approximately 1.284. Use the convention in which your rate was given.
How do I fit an exponential model from two observations?
Enter the first observation as the time-zero amount and the second amount at its positive elapsed time. The log of the ratio divided by elapsed time gives the constant log rate. This is the unique curve through the two positive points under a constant proportional-rate assumption.
What is the difference between exponential and linear growth?
Equal time increments multiply an exponential quantity by the same factor. Equal time increments add the same amount in a linear model. Plotting an exponential model on a logarithmic amount scale makes the constant ratio appear as a straight line.
Can the target occur outside the displayed time window?
Yes. A positive solved time beyond the horizon is displayed separately from the visible chart. If the quantity is moving away from the target, the equality would occur before time zero. A constant amount has no other reachable target.
What happens when growth or decay reaches the numeric display limit?
The affected result reports above or below the supported amount range. The plotted curve ends before unsupported samples, and the CSV records the range status with a blank numeric amount. Shortening the display horizon can show more of the curve at useful resolution.
Can this curve forecast changing real-world rates?
The projection assumes a constant proportional rate. Fitting two observations gives an exact curve through those points, but offers no evidence about how consistently the process follows that rate later. Use the inspection and comparison values to explore the stated assumptions.
Similar Calculators
Slope & Line Equation Calculator
Find slope, intercepts and exact line equations from two points or known coefficients. Graph parallel and perpendicular lines and find the shortest distance from a point.
Quadratic Formula Calculator
Solve any quadratic equation ax² + bx + c = 0 and find its real or complex roots instantly.
Compound Interest Calculator
Calculate how your money can grow over time with the power of compound interest.
