Decking Joist Layout & Board Angle Planner
Enter a measured deck and joist bays in order. Compare two decking angles and their entered center-to-center spacing limits. Inspect where a centered board crosses the existing joists, how far it travels through any complete bay and what an equal mathematical subdivision does to each oversized measurement.
Compare decking joist spacing and board angle
Check each measured bay against two entered limits. See the difference between spacing across joists and travel along a diagonal board.
Joist spacing comparison
23 in largest measured bay · 7 measured centers · 3.5 in left and 3.5 in right offsets
Option A · 90° · 16 in limit across joists
3 bays above the entered limit
23 in largest full-bay travel along the board
3 mathematical centers added in equal-split comparison
Option B · 45° · 12 in limit across joists
5 bays above the entered limit
32.5269 in largest full-bay travel along the board
5 mathematical centers added in equal-split comparison
Option A 3 over, 1 at limit. Option B 5 over, 1 at limit.
Edit deck measurements and bays
Measure each bay from center to center in order from the left. The outer offsets are kept separate.
Enter two spacing criteria
A 90° board crosses joists at right angles. A 0° board runs parallel. Use the across-joist center limit for the product and angle you are checking.
Measured gaps across joists
Bars show measured center-to-center distances. Solid and dashed marks show your two limits on a common scale.
- Option A 16 in
- Option B 12 in
- Bay 116 in C/C
A · At limit. B · Above limit.
- Bay 217.25 in C/C
A · Above limit. B · Above limit.
- Bay 314 in C/C
A · Below limit. B · Above limit.
- Bay 423 in C/C
A · Above limit. B · Above limit.
- Bay 518.75 in C/C
A · Above limit. B · Above limit.
- Bay 612 in C/C
A · Below limit. B · At limit.
Board angle in the measured footprint
The colored line is one board centerline through the deck midpoint. Dots mark crossings. Dashed green lines in the split comparison are mathematical centers.
Option A · 90° from joist direction
7 visible crossings on the centered board.
108 in modeled board line inside the footprint
Option B · 45° from joist direction
7 visible crossings on the centered board.
152.7351 in modeled board line inside the footprint
Show bay and crossing ledger
Full-bay travel is the distance along a board that crosses both centers. The separate crossing lists only include points inside the drawn deck.
Option A
16 in largest gap after mathematical splitting
| Bay | Measured C/C | Along board | Equal splits | New C/C |
|---|---|---|---|---|
| 1 | 16 in At limit | 16 in | 1 | 16 in |
| 2 | 17.25 in Above limit | 17.25 in | 2 | 8.625 in |
| 3 | 14 in Below limit | 14 in | 1 | 14 in |
| 4 | 23 in Above limit | 23 in | 2 | 11.5 in |
| 5 | 18.75 in Above limit | 18.75 in | 2 | 9.375 in |
| 6 | 12 in Below limit | 12 in | 1 | 12 in |
Show Option A sample crossings
- Measured center 1 · 3.5 in across · 72 in along joists · 3.5 in from line start
- Measured center 2 · 19.5 in across · 72 in along joists · 19.5 in from line start
- Measured center 3 · 36.75 in across · 72 in along joists · 36.75 in from line start
- Measured center 4 · 50.75 in across · 72 in along joists · 50.75 in from line start
- Measured center 5 · 73.75 in across · 72 in along joists · 73.75 in from line start
- Measured center 6 · 92.5 in across · 72 in along joists · 92.5 in from line start
- Measured center 7 · 104.5 in across · 72 in along joists · 104.5 in from line start
Option B
12 in largest gap after mathematical splitting
| Bay | Measured C/C | Along board | Equal splits | New C/C |
|---|---|---|---|---|
| 1 | 16 in Above limit | 22.6274 in | 2 | 8 in |
| 2 | 17.25 in Above limit | 24.3952 in | 2 | 8.625 in |
| 3 | 14 in Above limit | 19.799 in | 2 | 7 in |
| 4 | 23 in Above limit | 32.5269 in | 2 | 11.5 in |
| 5 | 18.75 in Above limit | 26.5165 in | 2 | 9.375 in |
| 6 | 12 in At limit | 16.9706 in | 1 | 12 in |
Show Option B sample crossings
- Measured center 1 · 3.5 in across · 21.5 in along joists · 4.9497 in from line start
- Measured center 2 · 19.5 in across · 37.5 in along joists · 27.5772 in from line start
- Measured center 3 · 36.75 in across · 54.75 in along joists · 51.9723 in from line start
- Measured center 4 · 50.75 in across · 68.75 in along joists · 71.7713 in from line start
- Measured center 5 · 73.75 in across · 91.75 in along joists · 104.2983 in from line start
- Measured center 6 · 92.5 in across · 110.5 in along joists · 130.8148 in from line start
- Measured center 7 · 104.5 in across · 122.5 in along joists · 147.7853 in from line start
Export the comparison
Show CSV text
How to use this calculator
- Measure deck width across joists, deck length along them and the first joist center from the left edge.
- Enter every measured center-to-center gap in order. Keep the left and right margins separate.
- Enter the board angle and the project’s across-joist center limit for each comparison. A board perpendicular to the joists uses 90°.
- Compare the bay marks and board plans. Switch between Measured centers and Equal-split comparison, then open the bay and crossing ledger.
- Export both options as a CSV, including exact split positions and the centered sample crossings.
The Formula
The mathematical logic powering this calculation is:
Use a rectangular plan with inches across the joists (x) and along them (y). Starting from the first measured center, add each measured bay width in order to get the next center. Right offset = deck width minus the last center coordinate. The outer offsets remain separate from center-to-center gaps. Comparisons use exact thousandths of an inch. A measured gap equal to the entered limit is at the limit.
Let θ be the angle between a board and the length of a joist. A 90° board crosses joists perpendicularly. A 0° board runs parallel. For perpendicular gap g and positive θ, travel along a board that crosses both adjacent joist centerlines is g ÷ sin θ. This is a different measurement from g. A parallel line has no finite across-bay travel. It may coincide with one center without producing any discrete crossings.
The plan shows one line through the deck midpoint in direction (sin θ, cos θ). Clip its ends to the rectangular boundary, then mark only its intersections with parallel joist centerlines inside that footprint. The clipping and travel use floating-point geometry. A small tolerance admits plotted boundary intersections, and the measured bay comparisons use exact integer dimensions. A shallow board angle can miss a bay that still appears in the full-bay travel ledger.
For a bay width g and the entered positive limit M, the hypothetical split count is the smallest whole count k with k × M ≥ g. The worksheet retains existing centers and divides that bay into k equal intervals with k − 1 mathematical centers. New gap is g ÷ k, recorded as an exact fraction of thousandth-inch units. This measures how many equal intervals would satisfy the entered spacing criterion. Joist sizes, blocking, fasteners, edges, local building rules, load ratings and actual construction placement are outside this model.
The cited Trex Signature 1-inch guide has product- and use-specific across-joist limits. It lists 16 inches at 90° in the shown 100 psf categories, 12 inches at 90° for the shown 200 psf commercial category, and separate adjustments at 60°, 45° and 30°. The example uses 16 and 12 inches as editable comparisons corresponding to a 16-inch base and its 45° adjustment. Other products, uses and angles require their own entered limits. The calculator does not select a spacing limit or assess the guide’s other requirements.
Use 1–12 measured gaps, each 0.001–120 inches. Deck width and length support 1–600 inches, angles support 0–90° and entered limits 1–120 inches. Numeric inputs support up to three decimal places. An implied center outside the deck must be corrected before a result is shown.Worked Example
If you input:
- Deck width and length: 108 inches across and 144 inches along the joists
- First center: 3.5 inches from left
- Measured gaps: 16, 17.25, 14, 23, 18.75 and 12 inches
- Option A: 90° board and 16-inch limit across joists
- Option B: 45° board and 12-inch limit across joists
Result:
The largest measured bay is 23 inches and both outer offsets are 3.5 inches. Option A has three bays above the entered limit and three mathematical centers in the equal-split comparison. Option B has five above and five mathematical centers. A 45° board travels about 32.5269 inches through the complete 23-inch bay. Option B’s largest perpendicular gap in the equal-split comparison is 12 inches.
Frequently Asked Questions
How does diagonal decking affect joist spacing?
At a fixed center-to-center gap, a diagonal board travels farther between joists. For example, a 45° board travels 16√2 inches through a complete 16-inch bay. The product’s permissible joist spacing should be entered separately in the units and direction specified by its guide.
What is the difference between bay width and travel along the board?
Bay width is the perpendicular center-to-center distance across parallel joists. Along-board travel follows the board’s path from one centerline intersection to the next. The two lengths are equal for a perpendicular board.
How does the planner handle uneven bays?
Each measured gap is compared separately. The equal-split option preserves every measured center and subdivides only gaps that exceed the entered limit.
Can the centered sample skip joists?
Yes. It ends at the deck boundary. A shallow diagonal can reach that boundary before crossing nearby joists. The measured bay ledger still reports the full travel through any complete bay at the selected angle.
What happens when the decking runs parallel to the joists?
The sample has no discrete crossings. It can coincide with one joist centerline. The worksheet can still compare the entered grid measurements, while along-board travel across a bay is unavailable.
Does an equal-split result establish that a deck is ready for installation?
The split records the smallest number of equal mathematical intervals for the entered width criterion. Product installation, joist design and any other site requirements need separate evaluation.
Similar Calculators
Deck Baluster Spacing Calculator
Plan deck baluster spacing from actual widths and post-to-post spans. Compare even and half ends, tape-rounded marks, clear gaps and cut quantities.
Wall Stud Calculator & Framing Takeoff
Plan wall studs around doors and windows. Compare specified layouts in a scaled elevation, inspect every member and export exact framing cut lists and quantities.
Deck Stain Coverage & Quote Planner
Calculate deck stain for exposed boards, stairs, fascia and rails. Compare two quotes using coat-specific coverage, whole containers and labor.
Plank Flooring Layout & Cost Calculator
Compare plank flooring layouts, staggered rows and compatible offcut reuse. Visualize cuts, check entered installation limits, estimate whole packs and project costs.
