Connecticut Paycheck Calculator & Two-Earner Withholding Planner

Use the official 2026 Connecticut two-earner withholding adjustment table with two regular paychecks. Compare which spouse’s CT-W4 would carry the adjustment, how much each paycheck changes, and how payroll rounding or zero state withholding affects the annual result.

Connecticut payroll · 2026

Compare the Connecticut adjustment on either paycheck

Apply the same published two-earner CT-W4 adjustment to Spouse A’s payroll or Spouse B’s payroll. See how pay frequency and available state withholding change the result.

The table adds $14.00 a year

The table adds $14.00 a year

$54,000.00 combined annual gross · $993.48 annual Connecticut withholding before an adjustment

Adjust Spouse A

$1.17 per check on line 2

CT withholding
$63.42
Take-home
$1,986.58

Monthly check · 12 per year

$0.04 more withheld than the annual table amount

Adjust Spouse B

$0.58 per check on line 2

CT withholding
$10.85
Take-home
$809.15

Semimonthly check · 24 per year

$0.08 less withheld than the annual table amount

Use known 2026 certificate and pay-stub facts for two spouses filing jointly, both with one Connecticut job and Code A. The comparison applies to regular resident wages on a fixed schedule for a full year, with no other CT-W4 adjustment. It estimates payroll withholding.

Spouse A payroll

12 regular checks per year.

Use the actual gross cash on a regular check.

Use the wage amount subject to Connecticut withholding.

Combine federal income tax, FICA and remaining cash deductions.

Spouse B payroll

24 regular checks per year.

Use the actual gross cash on a regular check.

Use the wage amount subject to Connecticut withholding.

Combine federal income tax, FICA and remaining cash deductions.

Published Connecticut salary table

The DRS table uses different salary headings down the rows and across the columns. The estimate finds the published cell closest to the two annualized gross salaries in the orientation you select. You can choose the exact headings from your worksheet.

Table row salary · Spouse A
$30,000.00
$0.00 from modeled annual gross
Table column salary · Spouse B
$24,000.00
$0.00 from modeled annual gross

Annual withholding adjustment

Each bar shows the change for a full year in that scenario. Per-check rounding and the zero withholding floor can change what a payroll actually applies.

Published table
+$14.00
Adjust Spouse A
+$14.04
Adjust Spouse B
+$13.92

Connecticut Code A worksheet

Inspect each spouse’s unadjusted regular withholding using the 2026 TPG-211 employer formula.

Annualized gross cash
$30,000.00
Annualized Connecticut wages
$30,000.00
Code A personal exemption
$6,000.00
Annualized wages after exemption
$24,000.00
Initial annual tax
$830.00
2% rate phase-out add-back
$0.00
Personal tax credit rate
10%
Annual formula withholding
$747.00
Base withholding per check
$62.25

Connecticut paycheck ledger

The two adjustment scenarios each use one certificate. The other check keeps its base withholding.

Cash ledger (USD)UnadjustedAdjust Spouse AAdjust Spouse B
Spouse A state withholding per check$62.25$63.42$62.25
Spouse B state withholding per check$10.27$10.27$10.85
Spouse A take-home per check$1,987.75$1,986.58$1,987.75
Spouse B take-home per check$809.73$809.73$809.15
Annualized household state withholding$993.48$1,007.52$1,007.40
Annualized household take-home$43,286.52$43,272.48$43,272.60
Download Connecticut paycheck CSV
View selectable CSV

How to use this calculator

  1. Confirm that both spouses use 2026 Connecticut Form CT-W4 withholding Code A and each has one regular Connecticut job.
  2. Enter each job’s payroll frequency, gross cash, Connecticut withholding wages and combined non-Connecticut cash deductions per check.
  3. Choose which spouse is represented by the supplemental table’s row headings. Review the nearest published cell or select the row and column from your worksheet.
  4. Compare the two CT-W4 line entries, state withholding and take-home. Inspect whether rounding or a zero withholding floor creates a gap from the published annual amount.
  5. Review the formula and household cash ledger, then download the full comparison as CSV.

The Formula

The mathematical logic powering this calculation is:

Use two spouses filing jointly, each with one regular Connecticut paycheck and confirmed 2026 CT-W4 withholding Code A. The modeled combined annual gross cash wages must be above $24,000 and no more than $100,500. Annualize each job’s gross cash and entered Connecticut withholding wages using its schedule. The worksheet supports 52 weekly, 26 biweekly, 24 semimonthly or 12 monthly pay periods. Connecticut withholding wages may differ from gross cash and cannot exceed it in this regular-cash model.
The DRS supplemental table accepts approximate annual wages in the row and column. When you leave the table selection automatic, this planner chooses the published cell with the smallest sum of absolute distances from those two wages in the selected orientation. Ties use the lower row heading, then the lower column heading. Select the headings yourself to use a particular DRS worksheet entry. The comparison reports the selected headings and differences. Every published cell retains its signed value, zero included. Blank cells are unavailable.
For each job’s base Connecticut withholding, use TPG-211. Subtract the Code A Table A exemption from annualized Connecticut withholding wages, flooring taxable wages at zero. Apply the progressive Table B rate, add the applicable Table C 2% rate phase-out, then apply the Table E percentage credit to that subtotal. Table D recapture begins above $105,000 of individual annualized wages, beyond the supported household scope. Divide the result by that job’s number of pay periods and round once to the nearest cent, half up.
The supplemental table gives a signed annual withholding adjustment. Divide that amount by the selected spouse’s number of pay periods and round to cents, halfway away from zero. The positive amount belongs on CT-W4 line 2. A negative amount’s magnitude belongs on line 3. Base withholding plus the signed amount floors at zero. Remaining reduction capacity is limited to that check’s base state withholding. The annual realized change is the applied per-check difference times that job’s pay periods. Take-home is each gross cash amount less modeled Connecticut withholding and the other cash deductions you enter.
Both projections repeat the regular checks for a full year and assume no other Connecticut certificate adjustments. The results are paycheck withholding estimates. Federal withholding, FICA and other deductions are inputs. Employer withholding-table or rounding practices, nonresident and supplemental wages, multiple jobs per spouse, prior paychecks, changes in deductions and final income tax liability are outside this worksheet.

Worked Example

If you input:

  • Spouse A: $2,500.00 a month in gross cash and Connecticut wages, with $450.00 other deductions.
  • Spouse B: $1,000.00 twice a month in gross cash and Connecticut wages, with $180.00 other deductions.
  • Published table headings: Spouse A on the $30,000 row and Spouse B in the $24,000 column.

Result:

The supplemental table adds $14.00 annually. Putting $1.17 on Spouse A’s line 2 each month leaves $1,986.58 take-home and adds $14.04 over 12 checks. Putting $0.58 on Spouse B’s line 2 each semimonthly check leaves $809.15 take-home and adds $13.92 over 24 checks.

Frequently Asked Questions

Who can use the 2026 Connecticut two-earner supplemental table?

This worksheet models a jointly filing household with two working spouses who have confirmed Code A on each CT-W4. The combined modeled annualized gross wages must be above $24,000 and no more than $100,500. Other CT-W4 codes and working arrangements have separate instructions.

Which spouse gets the adjustment on Form CT-W4?

The DRS supplemental table instructs the couple to use the adjustment on one spouse’s form. This comparison calculates the result of assigning it to either job. A positive amount is entered on line 2 and a reduction is entered as a positive amount on line 3.

How are the salary headings chosen?

The DRS asks you to use approximate salary headings. The automatic estimate selects the published cell with the smallest total distance to the two modeled salaries, given the selected orientation. You can use the published headings on your own worksheet instead. The two axes have different increments, so review the selected orientation and headings.

Why do the two annual results differ?

The same annual amount is spread across each job’s pay periods and rounded to cents. A payroll can only reduce a check’s Connecticut withholding to zero. A rounding residual or limited reduction capacity can change the amount realized in each scenario.

What belongs under non-Connecticut deductions?

Enter the sum of federal income tax withholding, employee Social Security and Medicare, and any other cash deductions from the regular check. Connecticut withholding is calculated separately. Use the Connecticut withholding wages from the same check when they differ from gross cash.

Does the result give the tax due on a joint Connecticut return?

The result compares regular payroll withholding under the entered facts. The amount due or refundable on a return depends on the couple’s actual full-year income, deductions, credits and other payments.

Similar Calculators