Compa Ratio Calculator & Salary Range Comparison
Compare base pay and salary range placement for two roles. Enter actual annual pay or an hourly rate for each, then bring both onto one full-time hours basis. See how moving to a new midpoint changes compa-ratio before the offered pay takes effect. Find the smallest cent of offered pay that preserves either your compa-ratio or your position within the salary range.
Compare pay against each salary band
See the actual pay change, normalize the schedules and check what the offer would need to preserve your current position.
Shared benchmark
Use the same full-time hours for both annual bands. Count the paid time included in base pay and match the bands to the roles and effective periods.
Compa-ratio falls 3.01 percentage points
Compa-ratio falls 3.01 percentage points
Actual annual base changes by +$8,000.00. Full-time-equivalent base changes by +$8,000.00 on the common 2,080-hour basis.
Current role
- Compa-ratio
- 92.22%
- Salary range penetration
- 32.50%
- Actual annual base pay
- $83,000.00
- Full-time-equivalent annual base
- $83,000.00
Proposed offer
- Compa-ratio
- 89.22%
- Salary range penetration
- 24.07%
- Actual annual base pay
- $91,000.00
- Full-time-equivalent annual base
- $91,000.00
Base pay inside each band
Both rows share an annual full-time-equivalent USD scale. The colored band runs from minimum to maximum. The dashed mark is midpoint and the circle is your base pay.
- Minimum
- $70,000.00
- Midpoint
- $90,000.00
- Maximum
- $110,000.00
- Base pay
- $83,000.00
- Minimum
- $78,000.00
- Midpoint
- $102,000.00
- Maximum
- $132,000.00
- Base pay
- $91,000.00
Why the compa-ratio changed
Move the current normalized pay to the offer midpoint first. Then change to the offered normalized pay. Each bar is a percentage-point effect.
Resulting compa-ratio 81.37%
Resulting compa-ratio 89.22%
Total compa-ratio change −3.01 pp. Range penetration change −8.43 pp.
Minimum offer pay to keep your position
Each answer uses the offer’s pay basis and the smallest cent that meets or exceeds the earlier placement.
Preserve compa-ratio
$94,066.67 / year on offer schedule
Within band at this minimum. It represents $94,066.67 full-time-equivalent annual pay.
Preserve range placement
$95,550.00 / year on offer schedule
Within band at this minimum. It represents $95,550.00 full-time-equivalent annual pay.
Audit and export
Download CSVView salary comparison ledger
| Measure | Current role | Proposed offer |
|---|---|---|
| Actual annual base pay | $83,000.00 | $91,000.00 |
| Full-time-equivalent annual base | $83,000.00 | $91,000.00 |
| Actual annual paid hours | 2,080 | 2,080 |
| Band minimum | $70,000.00 | $78,000.00 |
| Band midpoint | $90,000.00 | $102,000.00 |
| Band maximum | $110,000.00 | $132,000.00 |
| Compa-ratio | 92.22% | 89.22% |
| Range penetration | 32.50% | 24.07% |
| Band placement | Within band | Within band |
View CSV text
How to use this calculator
- Choose a common full-time annual paid-hours basis and match both salary bands to it.
- Enter the actual annual paid hours and base pay for each role. Choose the annual or hourly amount as quoted.
- Enter the minimum, stated midpoint and maximum from each role’s applicable salary band.
- Compare actual annual pay, full-time-equivalent base, compa-ratio and range penetration. Review the midpoint and pay effects.
- Check the minimum quote that preserves each measure and download the salary comparison ledger.
The Formula
The mathematical logic powering this calculation is:
Use regular base pay and annual paid hours for both roles. Enter minimum, midpoint and maximum as full-time annual USD figures on one common benchmark hours basis. Use the applicable job, cohort, effective period and paid-time convention for each entered band. The midpoint is the employer’s stated reference. It does not have to be halfway between the endpoints.
For hourly base R and actual paid hours W, actual annual pay is R × W and full-time-equivalent annual base is R × common benchmark hours. For an actual-schedule annual salary A, actual annual pay is A and full-time equivalent is A × common hours ÷ W.
Compa-ratio = normalized base ÷ salary-band midpoint. Range penetration = (normalized base − minimum) ÷ (maximum − minimum). Keep values below or above the band. The change bridge compares current normalized pay against the proposed midpoint before changing pay. The difference between that intermediate ratio and the original one is the midpoint effect. The difference between the final and intermediate ratios is the pay effect.
Preserve compa-ratio by multiplying the current ratio by the offer midpoint. Preserve range placement by adding the current penetration times the offer width to the offer minimum. Translate each FTE target to the offer’s quoted pay basis. Round up to the first whole cent that meets or exceeds the target. A negative result starts at zero. If a rounded target falls beyond the offer band or supported input range, show that condition. Exact arithmetic retains fractional hours and differences.
Use one currency and annual scope. Hours range from 1 to 8,784, with hundredths of an hour. Salary and each band bound use up to $10 million, and hourly amounts use up to $10,000. Pay may be zero. The minimum, midpoint and maximum are positive and strictly increasing. This models entered regular base pay only. Overtime, shift premiums, equity, bonuses, benefits, taxes, within-year pay changes, market compensation data and compensation compliance require separate analysis.Method sources
- South Carolina SCEIS Compensation Profile, compa-ratio and range penetration
- South Carolina Department of Administration, published classified pay bands
- Larimer County, compensation terms and definitions
- University of Washington, comparison on a full-time-equivalent basis
- U.S. Bureau of Labor Statistics, wage and compensation concepts
Worked Example
If you input:
- Common and actual paid hours: 2,080 hours per year for both roles
- Current pay and band: $83,000.00 against $70,000.00 minimum, $90,000.00 midpoint and $110,000.00 maximum
- Offer pay and band: $91,000.00 against $78,000.00 minimum, $102,000.00 midpoint and $132,000.00 maximum
Result:
Actual annual pay rises $8,000.00. The compa-ratio falls from 92.22% to 89.22%, a change of −3.01 percentage points based on the exact ratios. Applying the offered midpoint to existing pay moves the ratio by −10.85 points. The pay change adds 7.84 points. Range penetration falls from 32.50% to 24.07%. The minimum offer is $94,066.67 to preserve compa-ratio and $95,550.00 to preserve range placement.
Frequently Asked Questions
What does a compa-ratio of 100% mean?
The normalized base pay is at the stated midpoint of that salary band. A midpoint can be positioned off-center in a pay range.
How does salary range penetration differ from compa-ratio?
Range penetration measures how much of the band lies between the minimum and the normalized pay. It is 0% at minimum and 100% at maximum, with lower or higher values outside the band.
Can a raise lower compa-ratio?
Yes. If your full-time-equivalent pay increases less proportionally than the comparison midpoint, your compa-ratio falls. The bridge attributes midpoint change first and pay change second.
What should I enter for part-time pay?
Enter actual annual base paid on the part-time schedule or the regular hourly rate, plus actual annual paid hours. The salary bands still use the entered common full-time basis.
Why might the hourly target appear above a band maximum?
The calculation finds the first hourly cent that meets the mathematical target. Its annual full-time equivalent can cross a band boundary if exact equality falls between offered cents.
Does a low ratio show my role is underpaid?
A low ratio means entered normalized pay is below the entered midpoint. Pay policy, qualifications, cohort and market context require additional evidence. The worksheet uses only the two bands you entered.
Similar Calculators
Pay Raise Calculator & Effective-Date Comparison
Calculate a new annual salary, find the percentage from an offer, and compare how two effective dates change gross pay this year.
Salary to Hourly Calculator
Salary to Hourly for the exact fields in this tool, with clear inputs and an immediate result for planning or comparison.
Labor Burden Calculator & Employer Cost Planner
Compare the full employer cost of two labor plans. Add wages and benefits, account for paid and productive hours, and find the revenue needed at your target margin.
FTE Calculator & Staffing Capacity Planner
Calculate full-time equivalents from paid hours, see staffing gaps after shrinkage, and budget employee and contractor costs by team and week.
