Clutch Replacement Quote & Conditional Repair Planner

Compare two written quotes for the same manual clutch job. Review the part and labor charges, then see how a separately quoted flywheel addition changes the two totals. The optional what-if weight shows where the lower-price shop changes.

Written quote

Compare written clutch replacement quotes

Compare the same base job at two shops. See how a written conditional flywheel charge changes the total.

Base job and flywheel totals

Shop A

Base written quote
$1,333.00
Clutch and flywheel
$2,023.00
Flywheel addition
$690.00

Shop B

Base written quote
$1,425.00
Clutch and flywheel
$1,875.00
Flywheel addition
$450.00

Base only · Shop A costs $92.00 less

With flywheel · Shop B costs $148.00 less

How the lower quote changes

The planning weight ranges from 0% for the base only to 100% for the base and the added flywheel. Use your own what-if value or leave it blank.

Shop A at 40%
$1,609.00
Shop B at 40%
$1,605.00

Shop B costs $4.00 less

Modeled cost by planning weight

Displayed cost range · $1,333.00 to $2,023.00

Shop AShop B
Written cost paths for Shop A and Shop B at weights from zero to one hundred percent

Planning weight for the added flywheel

Break-even weight
38.3333%
Shared modeled cost
$1,597.50

Exact weight fraction 23/60.

Shop A is lower before the breakpoint. Shop B is lower after it.

Edit written estimates

Enter charges for the same documented job at both shops. Use Covered by clutch kit only when the priced kit includes the release component. Included adds no new charge.

Shop A written estimate

Base clutch job

Additional flywheel scope

Shop B written estimate

Base clutch job

Additional flywheel scope

Quote details and export

Shop A

Base clutch job
Clutch kit
$365.00
Release component
$85.00
Labor · 5.25 hr × $144.00/hr
$756.00
Shop fees
$39.50
Quoted tax
$87.50
Additional flywheel scope
Additional flywheel
$480.00
Labor · 1.25 hr × $144.00/hr
$180.00
Additional tax and fees
$30.00

Shop B

Base clutch job
Clutch kit
$575.00
Release component
Covered by clutch kit
Labor
$720.00
Shop fees
$30.00
Quoted tax
$100.00
Additional flywheel scope
Additional flywheel
$380.00
Labor
$45.00
Additional tax and fees
$25.00
Download clutch comparison CSV
View selectable CSV

How to use this calculator

  1. Use the same vehicle and written base clutch scope for both quotes.
  2. Record the written parts, release coverage, labor, fees and tax for each shop. Mark known included or still-unpriced lines explicitly.
  3. Enter the incremental written price for the same conditional flywheel event at each shop.
  4. Compare the base and flywheel-branch totals. Enter an optional planning weight to explore how costs cross.
  5. Download the quote, charge details and exact breakpoint fraction as CSV.

The Formula

The mathematical logic powering this calculation is:

Enter each shop’s written clutch job and the separate incremental amounts for the same documented conditional flywheel scope. The base job adds the priced clutch kit, release component, written labor, fees and tax. The flywheel branch adds only the separately stated flywheel, incremental labor, tax and fees. Use Covered by clutch kit when the priced kit already pays for the documented release component. Included charges add zero. An unpriced required line leaves its branch open. The known subtotal retains written charges, and a complete base quote needs at least one priced line. A complete flywheel total requires both the base and the added scope.

Enter labor as a written flat amount or hours multiplied by the written hourly rate. Extend each hourly line and round half up to cents before summing. Tax is already quoted by the shop and is entered as an amount. The model supports nonnegative dollar amounts to $100 million per fixed line, written rates to $100,000 per hour and up to 500.00 hours, with two decimals.

A hypothetical planning weight p is a number from zero to one, corresponding to the entered 0%–100%. The modeled cost is base × (1 − p) + complete flywheel-branch total × p. A 0% calculation uses only the base, and a 100% calculation uses only the complete flywheel branch. An intermediate weight requires both. Display rounds the resulting dollar amounts half up to cents. An exact crossover uses the unrounded line. Solve p = (base B − base A) ÷ (added A − added B) when a branch winner reverses. A tie at an endpoint keeps that endpoint; otherwise coincident quotes or the same winner across the range have a separate result. The break-even fraction stays exact even when the displayed percent rounds.

The two shops’ examples are illustrative prices for a shared single-clutch manual vehicle job. Enter only quotes that cover the same underlying work. The conditional event and its optional weight come from the project. The worksheet does not diagnose a clutch or identify required repairs, compatibility, local costs, warranty coverage, or labor time for a specific vehicle.

Worked Example

If you input:

  • Shop A: $365 kit, $85 release part, 5.25 hours × $144/hour, $39.50 fees and $87.50 tax. Conditional flywheel adds $690.
  • Shop B: $575 kit with release part included, $720 flat labor, $30 fees and $100 tax. Conditional flywheel adds $450.
  • Planning weight: 40% illustrative weighting for the added flywheel branch.

Result:

A has the lower base quote at $1,333 versus $1,425. B has the lower complete flywheel quote at $1,875 versus $2,023. The quotes cross exactly at weight 23/60 and $1,597.50. At the entered 40%, A models $1,609 and B $1,605.

Frequently Asked Questions

What if the release component comes in the clutch kit?

Mark Covered by clutch kit if the written priced kit already includes it. That records the scope and adds no duplicate charge.

Why can the lower base quote cost more with a flywheel?

The two shops can quote different incremental amounts. Comparing the complete base plus the same flywheel work can reverse the base-price ranking.

How is hourly labor priced?

Enter the hours and hourly rate supplied by the shop. The worksheet multiplies them and rounds that written line to cents before adding it to the branch.

What if the flywheel cost is unknown?

Mark its added line Unpriced. The base comparison remains available when it is complete, and the worksheet lists a known subtotal for the full scope.

Does the weight predict which work I will need?

The weight is an editable budgeting assumption. The added work and all its costs come from the written estimate or separately supplied scope.

Similar Calculators