Cash Conversion Cycle & Inventory Days Calculator
A shorter cash cycle does not automatically mean less funding is needed: growth can absorb the cash released by faster stock turnover or collections. Connect days inventory outstanding, receivable days and payable days to their separate flow denominators, then compare up to four steady-state scenarios. Enter direct average balances or up to 25 unevenly spaced snapshots. Follow signed cycle timelines, a component-by-component funding bridge, volume-versus-timing decomposition and one-factor sensitivity charts with matching tables. All money is USD. The planner measures inventory plus trade receivables minus trade payables, not total net working capital. It is an analytical comparison, not a transaction-level cash forecast, valuation, borrowing quote or recommendation to delay suppliers.
See what timing and growth do to your cash.
Connect inventory, customer collections and supplier payments. Compare steady-state funding needs, with transparent assumptions and no single-ratio shortcuts.
All money is USD. Example figures and financing rates are illustrative. Operating capital here means inventory + trade receivables − trade payables; it excludes cash and other current assets or liabilities.
1. Measure the observed period
Use the same period for all three flow totals and balance observations.
A simple annual cost proxy, separate from the one-time funding change.
Enter actual credit purchases; cost of goods sold is not substituted.
Each mode retains its own drafts. Switching does not overwrite balances or invent missing observations.
2. Compare forecast flows and target days
Enter each forecast period’s flows separately, then the timing you want to examine. Targets are assumptions, not promised collection or payment dates. Longer supplier terms may affect discounts and relationships; less stock may affect service.
2 scenario comparisons updated.
3. Compare operating capital
Observed operating capital
≈ $150,000.00
Observed cash cycle: 60 days
Timing improvement: modeled one-time cash release
≈ $55,000.00
Negative means additional funding. This is a steady-state comparison, not cash already available.
| Scenario | Inventory target | Receivables target | Payables target | Operating capital | One-time cash release | Annual financing-cost proxy | Target cash cycle |
|---|---|---|---|---|---|---|---|
| Timing improvement | ≈ $90,000.00 | ≈ $75,000.00 | ≈ $70,000.00 | ≈ $95,000.00 | ≈ $55,000.00 | ≈ $5,500.00 | 35 days |
| Growth with improved timing | ≈ $108,000.00 | ≈ $90,000.00 | ≈ $84,000.00 | ≈ $114,000.00 | ≈ $36,000.00 | ≈ $3,600.00 | 35 days |
The annual financing-cost proxy is not profit and is not added to the one-time cash release. Actual borrowing costs and cash realization can differ.
| Component | Average balance | Daily flow denominator | Days | Turnover in observed period |
|---|---|---|---|---|
| Inventory | ≈ $120,000.00 | Cost of goods sold: ≈ $2,000.00/day | 60 days | ≈ 6.08333 times |
| Trade receivables | ≈ $90,000.00 | Net credit sales: ≈ $3,000.00/day | 30 days | ≈ 12.1667 times |
| Trade payables | ≈ $60,000.00 | Net credit purchases: ≈ $2,000.00/day | 30 days | ≈ 12.1667 times |
4. Follow the cycle
Conceptual timing, not a transaction schedule. Inventory and collections run forward from day zero; supplier funding can extend beyond collection. A reversed cash interval means a negative cycle. Every line uses the same day scale.
Observed ratios · 60 days
Inventory holding: day 0 → 60 (60 days)
Customer collection: day 60 → 90 (30 days)
Supplier funding: day 0 → 30 (30 days)
Cash interval: day 30 → 90 (60 days)
Timing improvement · 35 days
Inventory holding: day 0 → 45 (45 days)
Customer collection: day 45 → 70 (25 days)
Supplier funding: day 0 → 35 (35 days)
Cash interval: day 35 → 70 (35 days)
Growth with improved timing · 35 days
Inventory holding: day 0 → 45 (45 days)
Customer collection: day 45 → 70 (25 days)
Supplier funding: day 0 → 35 (35 days)
Cash interval: day 35 → 70 (35 days)
5. Explain the funding change
This bridge starts at observed operating capital and applies each component’s cash release. Positive release reduces capital tied up; negative release increases it. Payables are subtracted in operating capital.
Inventory: ≈ $150,000.00 → ≈ $120,000.00
Cash release contribution: ≈ $30,000.00
Trade receivables: ≈ $120,000.00 → ≈ $105,000.00
Cash release contribution: ≈ $15,000.00
Trade payables: ≈ $105,000.00 → ≈ $95,000.00
Cash release contribution: ≈ $10,000.00
| Component | Observed balance | Target balance | Cash release contribution | Operating capital after change |
|---|---|---|---|---|
| Inventory | ≈ $120,000.00 | ≈ $90,000.00 | ≈ $30,000.00 | ≈ $120,000.00 |
| Trade receivables | ≈ $90,000.00 | ≈ $75,000.00 | ≈ $15,000.00 | ≈ $105,000.00 |
| Trade payables | ≈ $60,000.00 | ≈ $70,000.00 | ≈ $10,000.00 | ≈ $95,000.00 |
Separate changes in volume from changes in timing
| Stage | Operating capital | Cash release contribution |
|---|---|---|
| Observed | ≈ $150,000.00 | — |
| Forecast flows at observed timing | ≈ $150,000.00 | $0.00 |
| Forecast flows at target timing | ≈ $95,000.00 | ≈ $55,000.00 |
Volume contribution + timing contribution = ≈ $55,000.00. The order is explicit: first apply forecast daily flows at observed timing, then change timing.
6. Test one timing change at a time
Timing improvement. Each line changes only its own target days, holding other targets and forecast flows fixed. Higher cash release is a modeled funding change, not a recommendation to reduce stock or delay suppliers.
- 1. Inventory — solid
- 2. Trade receivables — dashed
- 3. Trade payables — dotted
| Change | Modeled cash release per day |
|---|---|
| Reduce inventory days | ≈ $2,000.00 |
| Reduce trade receivables days | ≈ $3,000.00 |
| Increase trade payables days | ≈ $2,000.00 |
All timing sensitivity points
| Changed component | Target days | Operating capital | One-time cash release | Annual financing-cost proxy |
|---|---|---|---|---|
| Inventory | 15 | ≈ $35,000.00 | ≈ $115,000.00 | ≈ $11,500.00 |
| Inventory | 30 | ≈ $65,000.00 | ≈ $85,000.00 | ≈ $8,500.00 |
| Inventory | 45 | ≈ $95,000.00 | ≈ $55,000.00 | ≈ $5,500.00 |
| Inventory | 60 | ≈ $125,000.00 | ≈ $25,000.00 | ≈ $2,500.00 |
| Inventory | 75 | ≈ $155,000.00 | ≈ -$5,000.00 | ≈ -$500.00 |
| Trade receivables | 0 | ≈ $20,000.00 | ≈ $130,000.00 | ≈ $13,000.00 |
| Trade receivables | 10 | ≈ $50,000.00 | ≈ $100,000.00 | ≈ $10,000.00 |
| Trade receivables | 25 | ≈ $95,000.00 | ≈ $55,000.00 | ≈ $5,500.00 |
| Trade receivables | 40 | ≈ $140,000.00 | ≈ $10,000.00 | ≈ $1,000.00 |
| Trade receivables | 55 | ≈ $185,000.00 | ≈ -$35,000.00 | ≈ -$3,500.00 |
| Trade payables | 5 | ≈ $155,000.00 | ≈ -$5,000.00 | ≈ -$500.00 |
| Trade payables | 20 | ≈ $125,000.00 | ≈ $25,000.00 | ≈ $2,500.00 |
| Trade payables | 35 | ≈ $95,000.00 | ≈ $55,000.00 | ≈ $5,500.00 |
| Trade payables | 50 | ≈ $65,000.00 | ≈ $85,000.00 | ≈ $8,500.00 |
| Trade payables | 65 | ≈ $35,000.00 | ≈ $115,000.00 | ≈ $11,500.00 |
Keep the complete comparison
CSV contains all retained inputs, exact results, intervals, timelines, funding contributions and sensitivity points. Fraction values preserve unrounded precision. Save before leaving the page.
How to use this calculator
- Choose Timing and growth example or Seasonal snapshots example. Enter Observed period length and an explicit Annual financing-cost assumption; the rate is illustrative until replaced with your own assumption.
- Enter Cost of goods sold, Net credit sales and Net credit purchases for the same observed period. Keep balance and flow scopes consistent. Purchases are not inferred from cost of sales or changes in inventory.
- Choose Enter period averages or Use dated balance snapshots. For snapshots, enter offsets from day 0 to the last day of the observed period in increasing order. Insert extra observations before closing; the tool will not sort or invent missing values.
- For each scenario, enter its Forecast period length, forecast flow totals and Target inventory, receivable and payable days. Duplicate a scenario to isolate a timing or volume change. Modes retain separate drafts.
- Read one-time cash release separately from the annual financing-cost proxy. Inspect the signed timelines, funding bridge and volume/timing decomposition, then change one timing assumption at a time using the sensitivity chart and table.
- Download CSV or open Selectable CSV to retain all assumptions and exact model results. Verify accounting consistency, seasonality and commercial consequences before using the estimate in a decision.
The Formula
The mathematical logic powering this calculation is:
For the same observed period of D days, inventory days = average inventory / (cost of goods sold / D); receivable days = average trade receivables / (net credit sales / D); payable days = average trade payables / (net credit purchases / D). Purchases are explicitly entered, not silently replaced by cost of goods sold. Turnover for each component = its period flow / its average balance. These turnover values are for the entered period, not automatically annualized. Zero flow makes days unavailable; zero balance makes turnover unavailable.
Cash-conversion cycle = inventory days + receivable days − payable days, when all three day ratios are available. The conceptual timeline places inventory at [0, DIO], collections at [DIO, DIO+DSO], supplier funding at [0, DPO] and the cash interval at [DPO, DIO+DSO]. A reversed cash interval retains a negative cycle. These are ratio-based illustrations, not synchronized transaction dates.
Direct averages are used as entered. In snapshot mode, average balance = sum((left balance + right balance)/2 × interval days) / observed period days. This assumes linear balance movement between observations. Snapshot offsets must increase strictly from day 0 through D. An unweighted average of unequally spaced observations is not substituted.
Operating capital C = average inventory + average trade receivables − average trade payables. Target balances for each scenario equal its separate forecast daily flow × the corresponding target days. Target capital T = target inventory + target receivables − target payables. Modeled one-time cash release R = C − T. Inventory and receivable release components are current minus target balances; payable release is target minus current payables. Negative release means additional funding. Annual financing-cost proxy = R × entered annual rate/100; do not add that annual proxy to the one-time release.
When all observed ratios are defined, volume-only balances = forecast daily flows × observed days. Volume release = current capital − volume-only capital. Timing release = volume-only capital − target capital. These contributions sum exactly to R. The order is explicit and the decomposition is unavailable when an observed ratio is undefined. Target balance comparisons remain available as hypothetical steady-state assumptions.
Sensitivity changes one target at a time by −30, −15, 0, +15 and +30 days, clamps to 0–3650 and removes duplicates. Other targets and forecast flows remain fixed. A one-day reduction in inventory or receivable days releases the corresponding forecast daily flow; a one-day increase in payable days releases forecast daily credit purchases. This does not account for stockouts, discounts or commercial consequences.
Limits: observed and forecast periods 1–3660 whole days; 2–25 snapshots in snapshot mode; 1–4 scenarios; target days 0–3650 with up to four decimal places; annual financing assumption 0–100% with up to four places. All money inputs are nonnegative USD, up to $1 trillion each, with at most two decimal places. Exact rational arithmetic preserves derived values; displays round for readability and CSV preserves fractions. Blank active fields remain invalid. Negative net flows or balances require another analysis.Worked Example
If you input:
- Observed period: 365 days; average inventory $120,000, trade receivables $90,000, trade payables $60,000.
- Observed flows: COGS $730,000; net credit sales $1,095,000; net credit purchases $730,000.
- Timing improvement: Same forecast flows over 365 days; target inventory 45 days, receivables 25 days, payables 35 days.
- Growth with improved timing: Forecast COGS $876,000, credit sales $1,314,000, credit purchases $876,000 over 365 days; the same 45/25/35 targets.
- Annual financing-cost assumption: 10%, illustrative; kept separate from one-time cash release.
Result:
Observed inventory, receivable and payable days are 60, 30 and 30, giving a 60-day cash cycle and $150,000 operating capital. Timing improvement targets $90,000 inventory + $75,000 receivables − $70,000 payables = $95,000 capital, releasing a modeled $55,000 once. The annual financing-cost proxy is $5,500. Growth with the same timing requires $108,000 + $90,000 − $84,000 = $114,000 capital and releases $36,000, with a $3,600 annual proxy. Both targets have a 35-day cycle. For the growth case, forecast flows at observed timing require $180,000: volume absorbs $30,000 while timing releases $66,000, leaving the net $36,000 release.
Frequently Asked Questions
Is days sales in inventory the same as inventory days?
Here it means average inventory at cost divided by daily cost of goods sold, also called days inventory outstanding. Despite the word sales, sales revenue is not its denominator. Receivable days separately uses net credit sales.
Why does payable days use credit purchases rather than cost of goods sold?
Payables relate to purchases on credit. Cost of goods sold may differ because of inventory changes, cash purchases, production costs or other adjustments. This planner requires an explicit credit-purchases amount instead of assuming those measures are equal.
What does a negative cash-conversion cycle mean?
The ratio-based supplier-funding period exceeds inventory holding plus customer collection time. It can indicate collections precede supplier payments on average. It does not prove the business has enough cash for every obligation or justify delaying agreed payments.
How are uneven balance snapshots averaged?
The model assumes a straight-line balance path between consecutive observations. Each interval contributes its mean endpoint balance multiplied by its duration; total balance-days are divided by the period length. Two endpoints give the ordinary opening/closing mean. More observations can describe seasonality better but do not reveal unobserved daily movements.
Why are some results unavailable when I enter zero?
A zero flow denominator makes its days ratio undefined, even with a zero balance. A zero average balance makes turnover undefined. The combined observed cycle and growth/timing decomposition need all three observed day ratios. Explicit hypothetical target balances can still be compared, with their steady-state limitation visible.
Is operating capital the same as total net working capital?
No. This worksheet includes inventory plus trade receivables minus trade payables only. It excludes cash, tax balances, debt and other current assets or liabilities. Its result is not a full balance-sheet liquidity measure.
Why can the same cash-cycle days require different funding?
Balances depend on different daily flows: inventory on COGS, receivables on credit sales and payables on credit purchases. Growth and the mix of those flows change capital requirements even when timing is unchanged. Multiplying cycle days by one sales-per-day number generally does not reconstruct the three balances.
Can I treat cash release or the financing proxy as profit?
No. The release is a one-time comparison of operating-capital balances under steady-state assumptions. The financing-cost proxy applies your annual rate to that amount and is shown separately. Actual cash realization, borrowing costs, taxes, stockouts, lost discounts, bad debts and transition timing are not modeled.
Similar Calculators
ROAS Calculator & Campaign Profit Planner
Compare advertising scenarios with gross and net ROAS, returns, order costs, fees and profit. Visualize break-even budgets and export the full campaign comparison.
Profit Margin Calculator
Calculate gross, operating, and net profit margin percentages for your business or product.
Break-Even Calculator
Find the break-even point for your business — how many units you must sell to cover all costs.
DCF Calculator
Build a professional two-stage discounted cash flow valuation with growth-stage, terminal-stage, book value, and margin-of-safety analysis.
Payment Processing Fee Calculator
Compare processing quotes across payment groups, refunds, fee caps and monthly minimums. Visualize fees and net proceeds, find a target-net charge and export exact ledgers.
EOQ & Inventory Ordering Planner
Compare economic order quantities with pack sizes, all-units discounts, storage and order budgets. Visualize carrying costs, stock cycles and supplier tradeoffs.
