A1C Calculator & Lab History

Compare lab A1C results even when different reports use percent or mmol/mol. Enter each lab date, reported value and reporting unit. The calculator keeps the original values, converts them to a shared scale, and plots the results with calendar spacing. See how much A1C changed in percentage points and view the ADAG estimated average glucose where the published table supports it. Your readings stay in this page during the session, with an optional CSV export.

Lab results

A1C lab history workspace

Put dated A1C lab results on one scale and compare the change across reports.

Latest standardized A1C 7.0 percent. 3 dated lab results.

Latest standardized A1C
7.0%
2025-10-15 · 52.995 mmol/mol
Change since first result
−1 pp
Over 273 days
Estimated average glucose
154 mg/dL
8.6 mmol/L · ADAG estimate

Enter your lab results

Copy the date, value and unit from each lab report. Each reporting unit keeps its own input draft. To view a different scale without editing a result, change the chart measurement.

Result 1
Result 2
Result 3

A1C over time

A1C (NGSP %)9.335
A1C (NGSP %) by lab dateElapsed time runs from left to right. The comparison table contains the measurement and date for every point.
Lab date6.678
The dots mark 3 dated results across 273 days. Horizontal spacing follows elapsed days.

What the glucose estimate represents

ADAG estimates average glucose from a population study. Your measured meter or sensor averages can differ. For 7.0% A1C, the study reported 95% prediction limits of 123–185 mg/dL.

Lab result comparison

Reported and standardized results ordered by lab date
Lab dateOriginal reportNGSP (%)IFCC (mmol/mol)Change (pp)eAG (mg/dL)
8.0 %8.063.927—183
75 mmol/mol9.01375+1.013212
7.0 %7.052.995−2.013154

Changes are from the prior dated result in percentage points (pp). CSV includes the original readings, calculation precision and any published study limits.

How to use this calculator

  1. Choose Use my own results, or load a mixed-unit or single-result example.
  2. Enter the Lab date and select the Reporting unit printed on the lab report. Type the numerical Reported A1C value in that unit.
  3. Use Add lab result for another date. Enter results in any order and keep one result per date.
  4. Change Chart measurement to view NGSP percent, IFCC mmol/mol or estimated glucose while keeping your original lab entries. Compare the chart with the Lab result comparison table.
  5. Use Download A1C CSV to save the original readings, converted values, changes and available estimates. Show selectable CSV gives you the same data as text.

The Formula

The mathematical logic powering this calculation is:

The NGSP relationship for IFCC results reported in mmol/mol is A1C (%) = 0.09148 × IFCC + 2.152. The workspace uses its algebraic inverse, IFCC = (A1C (%) − 2.152) ÷ 0.09148, so the two calculator conversions are consistent before display rounding. The values and units printed on the original lab reports stay separate from the standardized results.

The A1C-Derived Average Glucose (ADAG) study estimated average glucose as 28.7 × A1C (%) − 46.7 mg/dL. For mmol/L, the calculator uses the published table coefficient 1.5944 × A1C (%) − 2.5944. This estimate uses a relationship fitted across a study population. It is different from the glucose average recorded by a meter or sensor. The workspace calculates eAG only between 5% and 12% standardized A1C, corresponding to the endpoints in the ADAG study's published table. At the exact whole-percent values in that table, it also shows the published 95% prediction limits in mg/dL. These limits describe the study's uncertainty.

The workspace accepts up to 60 lab dates from 1900 to 2100 and one result per date. Enter values with up to three decimal places from 2.152–20.448% or 0–200 mmol/mol. These entry bounds define the conversion workspace. The chart spaces points by days between lab dates. A change is the difference between two standardized NGSP percentages, expressed in percentage points. The table rounds standardized values for reading and the CSV exports calculation precision. eAG displays whole mg/dL and one decimal place in mmol/L.

Worked Example

If you input:

  • Lab date 2025-01-15: Reported A1C 8.0%
  • Lab date 2025-05-15: Reported A1C 75 mmol/mol
  • Lab date 2025-10-15: Reported A1C 7.0%

Result:

The middle measurement converts to 9.013% using 0.09148 × 75 + 2.152. The latest result is 7.0%, down 2.013 percentage points from the middle result and 1 percentage point from the first over 273 days. The latest estimated average glucose is 154 mg/dL after rounding. The ADAG study reported 95% prediction limits of 123–185 mg/dL at 7.0%.

Frequently Asked Questions

How do NGSP percent and IFCC mmol/mol relate?

They are reporting scales for A1C. The NGSP master equation converts 53 mmol/mol to about 7.00044%. Reported values such as 53 mmol/mol and 7.0% correspond closely at common lab rounding precision. The calculator preserves the numbers printed on both reports.

Why is estimated average glucose different from my meter or CGM average?

The ADAG estimate comes from a population regression using lab A1C as the input. A meter or sensor summarizes the glucose readings that device collected over its own time window. The estimate and measured average can differ for an individual.

Why does a result have no estimated average glucose?

The workspace gives eAG for standardized A1C values from 5% through 12%, the bounds of the published ADAG conversion table. The threshold uses the unrounded standardized value. The original A1C reading still appears in the history outside that range.

What do the ADAG prediction limits mean?

The study reported a range around its estimated average glucose for each exact whole percentage from 5% through 12%. These limits describe how observed average glucose varied around the research estimate. They are separate from glucose targets and from the precision of the lab assay.

What is a percentage-point change in A1C?

Subtract the older NGSP percentage from the newer one. A change from 8.0% to 7.0% is a decrease of 1 percentage point. The graph uses the dates as entered and displays observations at the time of each lab report.

Can conditions affect how the lab result relates to glucose?

Some hemoglobin variants affect certain test methods. Conditions that change red blood cell lifespan can also change the relationship between lab A1C and glucose. When an A1C result and measured glucose differ, the lab or clinician can explain how the method and your circumstances affect interpretation.

Similar Calculators